Product Description
Bend Axis A7VO80 Hydraulic Pump or Hydraulic Motor A6VM80 Replacement parts .
Technical information
Rexroth Axial piston variable pump A7VO Series
Nominal pressure 350 bar
Maximum pressure 400 bar
Open circuit
-Variable pump with axial tapered piston rotary group of bentaxis design, for hydrostatic drives in open circuit
-For use in mobile and stationary applications
-The flow is proportional to the drive speed and displacement.
-The flow can be infinitely varied by adjusting the bent axis.
-Wide selection of control devices
-Compact, robust pump with long service life
Models:A7VO28/A7VO55/A7VO12/A7VO80/A7VO107/A7VO160/A7VO200/A7VO172/A7VO250/A7VO355/A7VO500
Product details
| Product name | Piston Pump Unit/Parts |
| Model No | A6VM160~500/A6VE160/A7VO28~500 |
| Types | Rexroth hydraulic piston pump |
| Function | Completely interchargeable with original pump |
| Application | Construction machinery,continous soil mix, concrete-pump truck |
| Product Keywords | A7VO80 |
| PART # | DESCRIPTION | USED IN PUMPS # |
| R425758 | PINION GEAR | A8VO08 |
| R415312 | VALVE PLATE RH | A6VM80 |
| R425759 | DRIVE SHAFT | A6VE80 |
| R419657 | VALVE PLATE LH | A7VO80 |
| R421289 | CYLINDER BLOCK | |
| R45712 | CENTER PIN | |
| R443339 | PISTON | |
| R831893 | PISTON RING | |
| R062847 | RETAINER PLATE | |
| R831106 | SCREW | |
| R036642 | GEAR | |
| R422707 | STUB SHAFT | |
| R408894 | CUP SPRING | |
| R412411 | SPRING COLLAR | |
| R412412 | SPRING COLLAR | |
| R412413 | SPRING COLLAR | |
| R412414 | SPRING COLLAR | |
| R412415 | SPRING COLLAR | |
| R412416 | SPRING COLLAR | |
| R412417 | SPRING COLLAR |
A7VO80
| Ring piston | 7 |
| Ring | 14 |
| Cylinder block | 1 |
| Valve plate M | 1 |
| Valve plate R | 1 |
| Valve plate L | 1 |
| Retainer plate | 1 |
| Drive shaft | 1 |
| Drive shaft | 1 |
| Center pin | 1 |
| Center pin | 1 |
| Socket bolt | 14 |
| Spring seat | 1 |
| Disk spring | 4 |
| Shaft seal | 1 |
| Big bearing | 1 |
| Head block | 1 |
A6VM80/A6VE80
| Ring piston | 7 |
| Ring | 14 |
| Cylinder block | 1 |
| Valve plate M | 1 |
| Retainer plate | 1 |
| Drive shaft | 1 |
| Center pin | 1 |
| Socket bolt | 14 |
| Spring seat | 1 |
| Disk spring | 4 |
| Shaft seal | 1 |
| Big bearing | 1 |
| Head block | 1 |
| Brand | Model | Displacement | |
| Rexroth | A10VSO | 10/16/18/28/45/63/71/100/140 | |
| A4VSO | 40/71/125/180/250/355 | ||
| A2FE | 28/32/45/56/63/80/90/107/125/160/180/250/355 | ||
| A2FO | 10/12/16/23/32/45/56/63/80/107/125/160/180/200/250/355 | ||
| A2FM | 12/23/28/32/45/56/80/107/125/160/180/200/225/250 | ||
| A2F | 12/28/55/63/80/107/160/200/250 | ||
| A6VM | 55/80/107/160/200/250/355 | ||
| A7VO | 28/55/80/107/160/200/250 | ||
| A6VE | 28/55/80/107/160 | ||
| A8VO/A8V | 55/80/107/140/200 | ||
| A4VG | 28/40/45/50/56/71/90/125/180/250 | ||
| A4VTG | 71/90 | ||
| A11V(L)O | 130/190/260 | ||
| A10VG | 18/28/45/63 | ||
| A7V | 28/55/80/107/160/225/250/355 | ||
| AP2D | AP2D12, AP2D18, AP2D25, AP2D28, AP2D36 | ||
| Sauer | PV pump | 20/21/22/23/24 | |
| MF Motor | 20/21/22/23/24 | ||
| MV Motor | 22/23 | ||
| 90R Pump | 55/75/100/250 | ||
| 90L Pump | 55/75/100/250 | ||
| 90M Motor | 55/75/100/250 | ||
| Kawasaki | K3V | 63DT/112DT/140DT/180DT | |
| K3V | 112S/DT/DTP | ||
| K5V | 140/DTP |
| After-sales Service: | Offering Technical Support |
|---|---|
| Warranty: | 6 Months |
| Power: | Hydraulic |
| Transport Package: | Carton Box |
| Specification: | A7VO80 |
| Trademark: | Elephant Fluid Power |
Choosing a Shaft Collar
The shaft collar is a simple machine component used in a variety of power transmission applications. They are most often found on gearboxes and motors. Their simple design makes them an easy component to install and remove. Among other uses, shaft collars are used as bearing faces, mechanical stops, and locating components.
Clamp-style shaft collars
Clamp-style shaft collars fix many of the problems associated with set-screw collars. Available in two-piece and one-piece designs, these collars compress the shaft and lock into place. This allows for a uniform distribution of force on the shaft. Clamp-style shaft collars provide more holding power than set-screw collars, but they work best under consistent pressure. Clamp-style shaft collars also work better against negative forces, as they have a separate, un-tightened side.
Clamp-style shaft collars feature mounting holes in the outer diameter. Like clamp-style collars, mountable shaft collars can be installed on adjacent assemblies, but the mounting method does not affect holding power. Mountable shaft collars are commonly used in mounting sensor brackets. They may have rounded or flat outer diameters to accommodate the mounting process. Mountable shaft collars may also have tapped or flat holes to facilitate installation.
Quick-clamp shaft collars have the same functionality as clamp-style collars, but feature a removable lever. They are typically quick-to-install and do not mar the shaft. Quick-clamping collars are especially beneficial in applications that require light-duty torque. They also make for quick and easy adjustments.
Heavy-duty shaft collars feature larger outer diameters, a wider face, and a larger screw. These collars are ideally suited for d-shafting and can offer greater holding power than set-screw collars. These collars are typically manufactured from high-strength 2024 aluminum.
Clamp-style shaft collars can be used in many different applications. They can be used for a variety of applications, including bearings, and are especially suited for rotary machines. However, there are some drawbacks. While they may not be as flexible as set-screw collars, they can still perform well under constant loads. One drawback is that they tend to loosen under shocks and reduce the holding power of clamping hardware.
Another advantage of clamp-style shaft collars is that they do not mar the shaft and allow for easy positioning adjustments. Furthermore, they are easier to install and offer greater holding power than set-screw collars. These collars are made from high-quality materials with tight tolerances and are available in different bore sizes.
Clamp-style shaft collars are the most common type of shaft collars. They can be two-piece or one-piece. Among these, two-piece collars are the most convenient option. One-piece collars are hard to move, and two-piece collars have a hinge on one side and a clamp-style collar on the other side.
The materials used in Clamp-style shaft collars play a crucial role in their overall performance. They should be strong, corrosion-resistant, and have good holding power. They should also be able to withstand high temperatures. The most common materials used for shaft collars are steel and aluminum. Some types are made from stainless steel, while others are made from engineered plastic.
Clamp-style shaft collars can come in two pieces or single-piece designs. The smaller one-piece collars usually have a back-cut opposite the clamp cut, which reduces the cross-sectional area at the hinge point. This reduces the amount of force required to clamp the collar, which makes it easier to use stronger screws.
Aluminum, carbon steel, and stainless steel shaft collars
When choosing a shaft collar, you should consider the material it is made of. You can purchase collars made of carbon steel, aluminum, or stainless steel. Each of these materials has its benefits and disadvantages. Steel is more durable than aluminum and tends to provide better holding power. Aluminum, on the other hand, is lighter and has a favorable strength-to-weight ratio. The material you choose should depend on your specific needs, such as corrosion resistance or weight.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. These collars are available with outer diameter holes, flats, or quick-release designs. The material used to make these collars varies, with standard models made of 1215 lead-free steel and 2024 aluminum.
When choosing shaft collars, take into account the material and surface treatment. Different materials offer different properties, which will determine the performance of the collar. In addition to material, each shaft collar comes with a different holding power. Holding power is a key factor in choosing a shaft collar because it determines the amount of load it can withstand without slipping. The holding power depends on the screw size, the bore size, and the bulk of the collar.
Aluminum, carbon steel, and stainless steel shaft-collars can come in various styles. CZPT, for example, offers standard shaft collars in hex and d-bore profiles. Hex collars provide extra holding power and are better than set screws. Additionally, they do not mar the shaft and provide a better grip.
Another type of shaft collar is the quick-clamp shaft collar. These features allow users to install and remove them with ease. The quick-clamp collar has a handle that allows the user to quickly adjust it. While these shaft collars are designed for light duty applications, they are not recommended for heavy-duty or high-RPM applications.
Shaft collars are simple yet versatile components. They are used for various applications, including mechanical stops, stroke limiters, and retainers. They can also be used to align and space other components. Shaft collars are widely used in gearbox assemblies, flagpoles, and medical instruments, among others.
Two-piece shaft collars offer the same benefits of one-piece shaft collars, but offer additional convenience and versatility. They are easier to install and disassemble, reducing installation and labor costs. They also offer superior holding power. They also feature a threaded bore that acts as a positive mechanical stop when the shaft is rotated.
Over-torqueing shaft collars
Shaft collars are often used to secure components on shafts or other surfaces. They also provide an easy way to adjust the positioning of motor assembly components. Many different types of shaft collars are available to meet the specific needs of different applications. These include round, hexagonal, square, and D-bore collars.
The design of shaft collars must account for the load they will support. Some collars are made of metals, while others are made of plastic or composite materials. Typically, shaft collars are made of steel, but can also be made from aluminum or alloyed steel. Some are coated with zinc.
Shaft collars are available in one-piece and two-piece designs. Single-piece collars are designed to fit securely around a shaft, while double-piece collars allow for greater clamping force. These collars can be assembled anywhere along the shaft and can be installed between two pieces. They are available in different bore configurations and can be customized to meet your specific application.
Clamp style collars are easy to install and disassemble, and have a larger holding force than one-piece collars. These collars are also more shock-load resistant. They also don’t mar shaft surfaces, unlike setscrews. They can also be easily adjusted without damaging the shaft. Another style of collar is the quick-clamping style. This type of collar doesn’t mar the shaft, and is easily installed and removed without tools. These are best for light-duty applications.
When choosing a shaft collar, you should consider the tolerance of the shaft. It is important to select a shaft with a tight tolerance. The shaft’s hardness should not be greater than Rockwell C35. A wide tolerance will affect the holding power of the collar. If the shaft is undersized, you may need to use a screwdrive to slide the collar on the shaft.
Shaft collars are a versatile component with many different applications. They can secure industrial railings or serve as positioning devices in medical equipment. They are also widely used in automation machinery. They are used to protect cylinders and actuators and to ensure alignment between components. For this reason, they are very versatile and adaptable.
Clamp-style collars work well under constant loads, but they may need assistance during impact loads. Shock loads can be difficult to avoid, especially if the mass is small. Clamp-style collars with an undercut in the shaft help to resist the impact of shock. Moreover, they offer positive stops in both axial directions.
Clamp-style shaft collars are a good alternative for set-screw collars. They are easy to install and prevent shaft damage. They also come with an added advantage of being easy to adjust. Clamp-style shaft collars have double the holding power of set-screw collars.
In addition to holding components, shaft collars can also function as spacers and limit shaft movement. They are essential for many applications. They are commonly used in motors and gearboxes to ensure correct positioning for power transmission. They are also used to control shaft movement in reciprocating applications.
editor by CX 2023-11-10
China factory CNC Machining Stainless Steel Water Pump Bearing Shaft expanding shaft collar
Product Description
Densen Customized CNC machining stainless steel water pump bearing shaft
Product Description
| Customized Style |
1. Valve parts 2. Medical equipment parts 3. Mechanical equipment parts 5. Welded parts combination reprocessing |
| Material |
Copper, aluminum, steel, stainless steel and other non-ferrous metals nylon, PU and other plastic. |
| Size | φ0.5-φ500mm 1-1000mm long Or Customized |
| Surface Treatment |
1. Hard chromium plating 2. Decorative chromium plating 4. Passivation 5. Anodizing 6. Hard oxidation |
| Heat Treatment Mode |
Carburizing, nitriding, quenching and tempering |
Company Information
Founded in 2002, our factory is a non-governmental enterprise producing mental parts and components.
Now we have over 50 technical workers and over 80 sets of machining equipment such as manual lathes, NC lathes, digital display milling machines, screw rolling machines and centreless grinding machines. Our technological and production capacity has reached the advanced level at home.
Our products have passed evaluation of ISO9001:2000 international quality management system certification. Our main products are parts and components of pneumatic valves, air cylinders, special valves, hardware, automotive, machinery and electric appliances. Especially our parts for pneumatic valves and air cylinders have been all exported to the EU, winning unanimous praise among customers.Since our establishment, our factory has always pursued continuous innovation and followed the operation philosophy of “Zhicheng Precision, Pursues Precision”, joining hands with both domestic and overseas friends. As a rising bright pearl in the Chinese mechanical industry, we are forging ahead toward the grand goal.
| Quality Assurance | ISO9001:2000 Certified |
| Machining Equipment | 5 Axis Machining Center/ Composite Numerical Control Lathe/Machining Center / CNC Lathes / Surface Form Grinders /Cylindrical Bore Grinders / Milling Machines / Lathes / Sawing Machines / Wire-cuts / Laser Cuts / CNC Shearing Machines / CNC Bending Machines etc. |
| Materials | Aluminum Alloy: |
| 5052 /6061/ 6063 / 2017 / 7075 / etc. | |
| Brass Alloy: | |
| 3602 / 2604 / H59 / H62 / etc. | |
| Stainless Steel Alloy: | |
| 303 / 304 / 316 / 412 / etc. | |
| Steel Alloy: | |
| Carbon Steel / Die Steel / etc. | |
| Other Special Materials: | |
| Lucite / Nylon / Bakelite / POM / PP / PE / PC / Titanium / ABS etc. | |
| We handle many other type of materials. Please contact us if your required material is not listed above. |
|
| Surface Treatment |
Blacking,polishing,anodize,chrome plating, zinc plating,nickel plating,tinting |
| Inspection | Coordinate Measuring Machine(mitutoyo) / tool microscope(mitutoyo) / digimatic micrometer /inside micrometer / Dial Indicator / go-no go gauge / dialgage / electronic digital display caliper/ automatic height gauge / precision level 2 detector / precision block gauge / Hardness Tester / ring gauge etc. |
| File Formats | Solid Works,Pro/Engineer, AutoCAD(DXF,DWG), PDF,TIF IGS , STP etc. |
Processing support
Casting Service:
Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify.
New Densen offers multiple investment casting, sand casting, permanent casting, die casting, low pressure casting, ESR casting, lost foam casting, etc. Material can be handled include steel, iron, non-ferrous. Single component weight range is from 0.01Kg to 150 tons separately.
Forging Service:
Forging is a manufacturing process involving the shaping of metal using localized compressive forces. New CZPT offers open die forging, closed die forging and ring forging services. Material can be steel, iron and non-ferrous. Material can be handled include steel, iron, non-ferrous. Single component weight range is from 0.1Kg to 50,000Kgs.
Stamping Service:
Stamping (also known as punching) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape.
New Densen-XBL has more than 60 sets stamping equipments, is the designed supplier for several famous bands automotive companies, has the full ability to offer whole processes from blanking, stamping, welding, to electrostatic spraying for CZPT customers.
Welding & Fabrication Service:
Welding Frabrication is the fabrication process of metal structures by cutting, bending, then assembling the components together through welding
New CZPT offers manual arc welding ,laser welding and robot welding etc. UT, MPT,RT,PT all are available used for inspection, WPS &PQR (Welding Process Specification& Procedure Qualification Records) before production is available under clients’ requirement.
Machining Service:
Machining is any of various processes in which a piece of raw material is cut into a desired final shape and size by a controlled material-removal process.
New Densen-XBL has more than 60 sets precision machines incl. CNC center, boring, milling, lathing, etc., and more than 300 inspection instruments incl. 3 sets CMM with grade μm. Repeated tolerance can be maintained as 0.02mm. Meanwhile awarded by certificates ISO9001-2008; ISO/TS16949. New Densen-XBL specialized in high precise machining for small-middle-big metal components.
3rd Party Inspection:
New Densen worked as 3rd party inspection center besides its sister factories or sub-contractors’ self inspection, Offers process inspection, random inspection and before delivedry inspection services for material, mechanical, inside defects, dimentional, pressure, load, balance, surface treatment, visual inspection and test. Weekly project follow-up report together with pictures and videos, full quality inspection documentation available.
New CZPT also designed as 3rd party inspection representative for several customers when their products made by other suppliers.
Contact us and Application
| Application: | Fastener, Auto and Motorcycle Accessory, Hardware Tool, Machinery Accessory, Fastener, Auto and Motorcycle Accessory, Hardware Tool, Machinery Accessory, Fastener, Auto and Motorcycle Accessory, Hardware Tool, Machinery Accessory |
|---|---|
| Standard: | GB, GB |
| Surface Treatment: | Polishing, Polishing |
| Production Type: | Mass Production, Mass Production |
| Machining Method: | CNC Machining, CNC Machining |
| Material: | Steel, Plastic, Brass, Alloy, Copper, Aluminum, Iron, Steel, Plastic, Brass, Alloy, Copper, Aluminum, Iron, Steel, Brass, Alloy, Copper, Aluminum, Iron |
| Customization: |
Available
| Customized Request |
|---|
What Is a Shaft Collar?
A shaft collar is a simple machine component, but its function is important in many power transmission applications. Most commonly, shaft collars are used in motors and gearboxes. They can act as locating components, bearing faces, and mechanical stops. Their compact design makes them easy to install. In addition, they provide a clean, simple look for your gearbox or motor.
Sizes
There are a variety of sizes of shaft collars. Each type has different parameters and requirements. These specifications can be found on the manufacturer’s website. These dimensions are important for the selection process. In order to determine which size is best for your needs, first identify the system parameters and limitations that you’ll be using.
Shaft collars are available in a variety of sizes and materials. These pieces can range in thickness from just a few millimeters to several inches. A solid steel shaft collar is usually available from 1/8″ to six inches. The material used for shaft collars is either 304 stainless steel or lead-free steel.
The oldest style of shaft collar is the set collar, which uses a hardened set screw to penetrate the shaft surface. It is ideal for holding bearings, spacers, and sprocket hubs. These collars are typically installed using hex keys, which are six-sided L-shaped tools, also known as Allen Wrenches. These collars are useful for many different machine applications, and are often used in conjunction with springs and dampers to hold components in place. They are also useful as mechanical stops, stroke limiters, and bearing holders.
Shaft collars come in one-piece and two-piece designs. A one-piece collar provides uniform holding force on the shaft, whereas a two-piece shaft collar is stronger and can be assembled anywhere on the shaft. Shaft collars are generally available in English and metric units, and the manufacturer can alter the dimensions of any standard collar to meet your needs. For more unique situations, you can also choose a fully customized shaft collar that is specific to your application.
Functions
A shaft collar is a metal or plastic device used to locate and position components on a shaft. It also limits the movement of the shaft. These devices can be found on a wide variety of applications, including motor assembly components. There are many types of shaft collars. To help you find the right shaft collar for your application, you can use Thomas Supplier Discovery Platform. The platform has over 70,000 product categories to help you find the right solution.
Clamp-type collars are reliable under constant loads, but may require additional support under shock loads. A shock load is a force generated by a relatively small mass that is rapidly increased by impact. Clamp-style collars are designed to counteract this force, and an undercut on the shaft may help them stay firmly in place. Clamp-style collars are also available in two-piece designs, which offer a high holding force and ease of assembly.
A shaft collar is an important machine component. It holds and positions sprockets on a shaft. It also acts as a mechanical stop, and helps prevent a shaft from slipping. They can also be used to limit the movement of cylinders and actuators. These simple components are found in virtually every type of machinery.
The torque-generating force in a set-screw shaft collar is absorbed by friction between the threads and the clamp body. The friction between these parts helps compensate for the lost torsioning effort, which can lead to the collar failing to hold. Alternatively, a torque wrench can help control the final torque of the shaft collar.
Types
There are many different types of shaft collars available for different applications. It is important to understand the characteristics of each to find the right one for your application. The most common shaft collars are made from steel or aluminum, but some are also made of plastic. These are relatively inexpensive and lightweight, but their holding power is limited. Titanium shaft collars are much lighter than aluminum and are resistant to extreme temperatures, but they are only used in a few specific applications.
Another type is a clamp collar, which is mounted using a compression method. Compared to the set screw type, clamp collars are much stronger and have a higher holding power. Clamp collars come in either a one-piece or two-piece design. One-piece collars are used in applications where the shaft is split and requires a positive stop.
The strength of a shaft collar depends on the type of screw used to attach it to the shaft. The screw’s strength and diameter will affect the holding power of the shaft collar. In most cases, a manufacturer will offer the proper screw with the collar. In some cases, however, a non-standard screw may be more appropriate.
The set screw collar is one of the oldest types. Its disadvantage is that it can be difficult to move and may damage the shaft. Also, it is not as secure as a clamp-based collar. In addition, two-piece hinged shaft collars are the most convenient. One-piece collars are difficult to move, while two-piece collars can be moved easily along the shaft without separating components.
Dimensions
Shaft collars are a complex component and their dimensions are crucial to the performance of the application. Designing a shaft collar requires consideration of a variety of factors, such as the type of material, bore size and geometry of the shaft. The manufacturer of a shaft collar will usually publish performance data on its website, or users can contact them for assistance.
The material used in shaft collars has a significant impact on the collar’s strength and its holding capacity. Shaft collars should be made from a high-quality, corrosion-resistant material. The strength of the screw also plays an important role in the collar’s holding capacity. Generally, a collar’s manufacturer will provide the appropriate type of screw for the application. However, in some cases, a non-standard screw may be necessary.
Shaft collars are available in a variety of styles. One-piece collars are often used in applications where there is minimal or no disassembly or adjustment required. Alternatively, two-piece collars may be used when frequent disassembly is needed. Regardless of the style, the size of shaft collars should be consistent with the requirements of the assembly.
Shaft collars are made from steel or aluminum. They offer good holding power and are lightweight. Steel shaft collars are durable and have good corrosion resistance. However, the grade of steel can affect their performance. Stainless steel collars are easier to machine and have improved corrosion resistance. However, they may reduce the holding power.
Stainless steel
A stainless steel shaft collar is a simple mechanical component used to secure a shaft. It is used for many different applications, most commonly in motors and gearboxes. They also function as locating components, mechanical stops, and bearing faces. These collars are available in different sizes and can be used for a variety of different purposes.
Shaft collars come in various materials, including stainless steel, aluminum, and polyamide. They are available with a variety of different finishes, including electroless nickel plating. Stainless steel shaft collars are available in various diameters, including 5/16 in. through 5/8 in. They are also available in single and double split styles.
CZPT offers a full line of stainless steel shaft collars in both 303 and 316 stainless steel. These collars are resistant to corrosion caused by water and a wide variety of commercial-grade cleaning agents. They are also supplied with fastening hardware of similar material. For added durability, CZPT shaft collars are also available in engineered plastic.
Stainless steel shaft collars can be easily adjusted for the proper torque. They come in various sizes and are easy to install and remove. They can also be re-bored if necessary. One type of shaft collar is quick-clamp, which is equipped with a clamping lever and a handle. It’s ideal for frequent setup and adjustment.
Quick-clamp shaft collars
Quick-clamp shaft collars are a simple and convenient way to secure a shaft. They have a flush handle that sits flush with the outside diameter of the shaft and can be easily adjusted by hand. They are made from lightweight aluminum and stainless steel hardware that does not mar the shaft.
These shaft collars replace standard hardware and are easy to install and remove. Quick-clamp shaft collars are available in one, two, and three-piece clamping styles. Some quick-clamp shaft collars have an integrated hinge and countersunk mounting holes for easy mounting. They can also have a knurled nut for easier locating.
Quick-clamp shaft collars are a convenient option for many types of packaging machinery. They can be installed and adjusted with no tools, making them an efficient choice for frequent changeovers and setups. CZPT offers two types of quick-clamp shaft collars. The first type has a cam lever that sits flush with the outside diameter and is finger operated. The second type has an adjustable tension-adjustment screw for easy adjustment. Both designs are ideal for low-rpm applications where frequent changeovers are needed.
Quick-clamp shaft collars are made of black anodized aluminum and steel fasteners. These shaft collars are available in sizes ranging from 0-300mm and in various designs. A quick-clamp shaft collar has a high load-bearing capacity, and a high torque capacity. Axial load capacities and torque specifications are non-binding guidance values and do not represent a warranty or guarantee of their characteristics.
editor by CX 2023-05-19
China SF02 Customized High Quality CNC Hydraulic Pump Automobile Gear Tread Screw Dual Shaft electric motor shaft collar
Condition: New
Warranty: 1 Year
Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising Company
Weight (KG): 5
Showroom Location: None
Video outgoing-inspection: Not Available
Machinery Test Report: Not Available
Marketing Type: New Product 2571
Warranty of core components: Not Available
Core Components: PLC, Engine, Bearing, Gearbox, Motor, Pressure vessel, Gear, Pump
Structure: Worm
Material: metal
Coatings: NICKEL
Torque Capacity: 3600N
Model Number: HTX-Shaft
Application: Industrial Equipment
Product name: Shaft Collar
Process: Forging+machining+heating Treatment
Name: Stainless Steel Cnc Machining Shaft
Type: Machining Services
Surface Treatment: Chrome Plating
Quality: High Precision
Size: Clients Drawings
Certification: ISO9001
Color: Customzied
Packaging Details: Paper roll,PP Bag, Fabric Bag, Blister box, Carton, Crated Box, Playwood , Tray and so on, ODM packing is acceptable!
Port: HangZhou, hongkong
Customer Photos HTX precision rotating parts display Specification
| Size | According to the drawing |
| colour | Customized |
| Packing.Outer packaging and logo | According to the goods.According to customer requirements |
| surface treatment | Accept various surface treatments |
| Company Name: | HangZhou CZPT Technology Co., Ltd. |
| Total Building: | 12000 Square Meters |
| Experience: | 23 Years (Since 1998) |
| Equipments: | CNC turning, Auto-Lathes, CNC Machining Center, Stamping Machines, CNC spring machining, cnc cuting machine, welding machine, Hydraulic press, CZPT polishing machine, auto-milling machine, Driling Machines, Good running condition used TD42 nis san engine assembly 4WD transmission gearbox car Heading Machines, Slotting Machines,Tapping Machines, Chamfering Machines, Grinder Machines,Polishing Machine and so on |
| Testing Equipments: | 3D measuring machine, Height Gage, Coordinate Measuring Machine, Hardness Tester, Video Measuring Machine, Roughness Tester, Torsion Tester, Salt Spray Tester,Slide caliper, Micrometer. |
| Material: | Titanium Alloy, Brass, Bronze, Copper, Aluminum, Mild Steel, Stainless Steel, A366, Alloy, Carbon steel, ABS, PC, PEEK, PPS, PPS GF40, PPS GF30, POM, PET and so on. |
| Surface Treatment: | Zinc Plating, Nickel Plating,Chrome Plating, Passivation, Hardening, Anodizing, Black Oxide Coating,Degreasing, Brushing, Electronic Polishing, Powder Coating, Gold plating, CZPT Polishing, Custom Special One Two Piece Quick Release Single Double Split Shaft Collar Clamp PVD Coating |
| Certification: | GB / T19001-2016 / ISO9001:2015 CertificateNo.3571Q0 0571 R0S, SG S Factory Certificate |
Types of Shaft Collars
A shaft collar is a simple machine component that plays a critical role in power transmission. It is typically found in gearboxes and motors, and serves as a bearing face, mechanical stop, and locating component. Its simple design makes it easy to install and use. Its various functions make it a useful machine part for many applications.
Set screw shaft collars
Set screw shaft collars are used in many different applications and can be manufactured in a variety of materials. Typical materials include carbon steel, stainless steel, platinum, silver, nylon, polysulphone, PTFE, and PVC. Collars are easy to install and adjust. A variety of secondary services are available, including internal forming, chroming, and passivating.
Set screw shaft collars come in different styles, including standard collars, quick-release collars, split collars, and threaded collars. They can be purchased in standard and metric sizes, and are available in a variety of finishes. Standard collars are available in steel and stainless steel and have a zinc plated or black oxide finish.
Set screw shaft collars are an excellent choice for holding power transmission components in place and limiting shaft movement. They are held in place by a set screw that digs into the shaft material, providing holding power. They are available in both 303 and 316 Stainless Steel, making them a reliable and efficient choice for a variety of applications.
Clamping-style shaft collars
Clamp-style shaft collars are a versatile alternative to set-screw collars. They eliminate the problems associated with the set-screw collar, such as the possibility of shaft damage. They also lock in place by compressing against the shaft. This method distributes the force on the collar and shaft evenly, creating a stronger holding power.
Shaft collars are manufactured by many companies. You can buy them in-store or online, but it is important to buy from a reputable manufacturer. Many counterfeit collars endanger the life of your machine. Choosing a quality collar will help you avoid costly and time-consuming machine breakdowns.
Clamping-style shaft collars come in a variety of sizes and types. Some of them have a hex or D-bore. Some have circular grooves to assist with installation. They can be found in bore sizes from 1/4″ to one inch. They are often used for mounting gears, sprockets, and bearings.
Two-piece clamp collars are an excellent choice for high-load applications. They have improved clamping force and impressive holding power, and can be easily installed without major disassembly. Two-piece clamp collars can also be designed with a keyway to secure a keyed shaft. There are also special double-wide clamp collars for high axial load applications.
Another type of shaft collar is the quick clamping collar. It is an excellent choice for applications where you want to make frequent setup and adjustments. It allows for easy adjustments with minimal tools. Quick clamping collars feature a cam lever and a clamping lever. They are convenient and highly flexible, making them ideal for use in many industries.
Single split shaft collars
A single split shaft collar is designed to fit one shaft and eliminate two pieces. This makes installation and disassembly easy, reducing labor and downtime. It also uses a full seating torque of the set screws to distribute forces evenly around the shaft circumference, providing stronger holding power. It can be used on a wide range of rotating equipment.
Single split shaft collars are available from CZPT Products. They are a common, high-quality way to secure a shaft. They wrap around the shaft for a secure and tight fit. They are also a versatile option that can be easily removed. These collars can be used on both hard and soft standard round shafts. They provide superior grip compared to solid collars, provide tremendous axial force, and minimize shaft distortion.
Single split shaft collars are one of the many types of bearing shaft locking collars. They are made of EN8 steel, and come with a locking setscrew. This makes installing the collar quick and easy. The collar is available in many sizes, including small, medium, and large. If you do not find the right fit, you can also have one custom-made.
These collars are commonly used for mounting fixtures, sensors, and other assemblies. They are available in two-piece and one-piece styles, and have higher holding power than standard shaft collars. They are available in a wide range of materials, including 1215 lead-free steel, 303 stainless steel, and lightweight 2024 aluminum.
Aluminum shaft collars
The CZPT company produces Aluminum shaft collars for a variety of applications. These shaft collars feature a proprietary manufacturing process to ensure accurate face-to-bore perpendicularity. This helps to improve clamping forces and installation fit. Each collar features the CZPT name stamped on it, and the collar is finished with a black oxide process to achieve a fine glossy finish. The shaft collars are available in a variety of bore sizes and styles, and can be ordered in single or two-piece styles. Additionally, they are manufactured with a high-grade forged screw, which ensures the highest quality.
Aluminum shaft collars can be customized to fit your needs. Several accessories can be added to the shaft collar, such as steel mending plates. Those who need extra load capacity can select a keyed shaft collar. They are also available in lightweight styles. These shaft collars are easy to install and disassemble, and are made from two-piece aluminum for ease of installation.
Choosing the right shaft collar material is critical to the success of your application. You should consider steel, stainless steel, or aluminum for the best corrosion resistance. Steel is stronger and offers better holding power, while aluminum offers a lower weight and a favorable strength-to-weight ratio. When selecting shaft collars, it is important to take into consideration the corrosion resistance of each material. For example, carbon steel shaft collars will not be as corrosion resistant as aluminum shaft collars, but they are lighter and have a good hold power.
Carbon steel shaft collars
Carbon steel shaft collars are a versatile solution to holding bearings in place. They are available in a range of diameters and styles to meet your application needs. They can be used for many different applications, from aerospace and military applications to marine and automotive applications. These collars are available in a variety of materials, including carbon steel, aluminum, and stainless steel.
Carbon steel shaft collars are a cost-effective alternative to stainless steel shaft collars. CZPT manufactures lead-free carbon steel shaft collars, and they are also available with RoHS-compliant yellow zinc plating. Zinc plating is less expensive than stainless steel and is an excellent anti-corrosive option. CZPT yellow zinc collars are plated by a trivalent process rather than a non-compliant hexavalent process.
Shaft collars are available in both metric and inch bore sizes. They can be used for a variety of applications and are typically available in sizes ranging from 1/4″ to three inches. They are also available with metric screws in a range of sizes, which are useful for retrofitting equipment.
Shaft collars are available in a variety of materials, including carbon steel, 303 stainless steel, and aluminum. Some options feature threads and can be welded or bolted to shafts. For more advanced applications, aluminum threaded shaft collars can be used. They are often used for mounting sensors, fixtures, and other assemblies. They come in several styles, such as double-wide, heavy-duty, and threaded.
Hinge shaft collars
Hinge shaft collars are fastening devices that secure shafts or axles. They come in a wide range of sizes, shapes, and materials. These collars can be used in a wide range of applications, including non-rotary applications. They can be manufactured in stainless steel, 1018 steel, aluminum, and brass.
Shaft collars are simple to use but can perform a variety of functions. Their primary functions include holding components in place, locating components on a shaft, and establishing attachment between the shaft and another component. To choose the right collars for a specific application, designers should consider the design, style, materials, bore size, and geometry of the shaft. They should also consider any limitations or requirements associated with the application.
Hinge shaft collars are available in round and square bores. They are most commonly used in agricultural applications. Their size makes them easy to install, and their design makes them suitable for both large and small shafts. They are also used in situations where shafts are not easily accessible. Some types of shaft collars feature flat surfaces, which are great for mounting applications and splitting hubs.
Heavy duty shaft collars are also available. These collars have larger outer diameters, wider bores, and larger screw diameters. They are manufactured from lead-free steel with a proprietary black oxide finish.
editor by czh2023-02-19
China Cantilever Slurry Pump Parts Impeller Release Collar shaft collar blank
Item Description
Cantilever Slurry Pump Elements Impeller Release Collar
Slurry Pump Impeller Launch Collar(239)
Slurry pump impeller release collar’s basic element number is 239, it enables impeller to be eliminated very easily in massive slurry pump. Slurry pump impeller launch collar is located in between labyrinth and shaft sleeve, it is manufactured up of 3 phase.
The slurry pump impeller launch collars are also available to fit: AH pumps, L pumps, HH pumps, G and GH pumps.
Slurry Pump Impeller Relase Collar Content
Slurry pump Impeller Launch Collar portion code No. : FAM239M, S239M, T239M …
Slurry pump impeller release collars are typically made in stainless steel, specific content are also available.
one) Content: C23, SS316…
Naipu Slurry Pump Versions:
| AH series | L(R) ,M | HH | SP(R) | G |
| 1.5/1B-AH(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G |
| two/1.5B-AH(R) | 50B-L(R) | three/2d-HH | 65QV-SP(R) | 8/6E-G |
| 3/2C-AH(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | ten/8F-G |
| four/3C-AH(R) | 100 D-L | four/3X-HH | 150SV-SP(R) | ten/8S-G |
| six/4D-AH(R) | 150E-L | six/4F-HH | 200SV-SP | 12/10G-G |
| 6/4E-AH(R) | 300S-L | six/4X-HH | 250TV-SP | 14/12G-G |
| eight/6E-AH(R) | ten/8 R-M | 6S-H | 14/12T-G | |
| 8/6R-AH(R) | 10/8 E-M | eight/6S-H | ||
| ten/8F-AH(R) | 8/6X-H | |||
| 10/8X-AH(R) | 6S-HP | |||
| twelve/10ST-AH(R) | 8/6S-HP | |||
| fourteen/12ST-AH(R) | eight/6X-HP | |||
| sixteen/14TU-AH(R) |
Principal Pump element:
Impeller, Volute liner, Throat bush, body plate liner insert, frame plate, protect plate, expeller, Expeller ring, gland assembly, foundation, shaft sleeve, stuffing box, bearing assembly, modify screw, clamp washer, bolt, end go over, labyrinth, keeper plate, shaft spacer
|
US $10 / Piece | |
1 Piece (Min. Order) |
###
| Max.Head: | 30-50m |
|---|---|
| Max.Capacity: | >400 L/min |
| Driving Type: | Motor |
| Impeller Number: | Single-Stage Pump |
| Working Pressure: | High Pressure Pump |
| Influent Type of Impeller: | Single Suction Pump |
###
| Customization: |
Available
|
|---|
###
| AH series | L(R) ,M | HH | SP(R) | G |
| 1.5/1B-AH(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G |
| 2/1.5B-AH(R) | 50B-L(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G |
| 3/2C-AH(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | 10/8F-G |
| 4/3C-AH(R) | 100 D-L | 4/3X-HH | 150SV-SP(R) | 10/8S-G |
| 6/4D-AH(R) | 150E-L | 6/4F-HH | 200SV-SP | 12/10G-G |
| 6/4E-AH(R) | 300S-L | 6/4X-HH | 250TV-SP | 14/12G-G |
| 8/6E-AH(R) | 10/8 R-M | 6S-H | 14/12T-G | |
| 8/6R-AH(R) | 10/8 E-M | 8/6S-H | ||
| 10/8F-AH(R) | 8/6X-H | |||
| 10/8X-AH(R) | 6S-HP | |||
| 12/10ST-AH(R) | 8/6S-HP | |||
| 14/12ST-AH(R) | 8/6X-HP | |||
| 16/14TU-AH(R) |
|
US $10 / Piece | |
1 Piece (Min. Order) |
###
| Max.Head: | 30-50m |
|---|---|
| Max.Capacity: | >400 L/min |
| Driving Type: | Motor |
| Impeller Number: | Single-Stage Pump |
| Working Pressure: | High Pressure Pump |
| Influent Type of Impeller: | Single Suction Pump |
###
| Customization: |
Available
|
|---|
###
| AH series | L(R) ,M | HH | SP(R) | G |
| 1.5/1B-AH(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G |
| 2/1.5B-AH(R) | 50B-L(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G |
| 3/2C-AH(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | 10/8F-G |
| 4/3C-AH(R) | 100 D-L | 4/3X-HH | 150SV-SP(R) | 10/8S-G |
| 6/4D-AH(R) | 150E-L | 6/4F-HH | 200SV-SP | 12/10G-G |
| 6/4E-AH(R) | 300S-L | 6/4X-HH | 250TV-SP | 14/12G-G |
| 8/6E-AH(R) | 10/8 R-M | 6S-H | 14/12T-G | |
| 8/6R-AH(R) | 10/8 E-M | 8/6S-H | ||
| 10/8F-AH(R) | 8/6X-H | |||
| 10/8X-AH(R) | 6S-HP | |||
| 12/10ST-AH(R) | 8/6S-HP | |||
| 14/12ST-AH(R) | 8/6X-HP | |||
| 16/14TU-AH(R) |
Types of Shaft Collars
A shaft collar is a simple machine component that is an integral part of many power transmission applications. It is most commonly found in motors and gearboxes and serves as a mechanical stop, locating component, and bearing face. Its easy installation and quick assembly make it an ideal component for a variety of applications.
Clamp-style shaft collars
Clamp-style shaft collars are fasteners that fit over shafts. They can be made of aluminum, steel, or titanium. Stainless steel collars are available in corrosion-resistant finishes to prevent galling. Engineered plastics are also available. Black oxide finishes improve corrosion resistance and provide a smooth surface for screw installation.
The holding power of Clamp-style shaft collars depends on the shaft’s bore size and concentricity, which are important factors in many applications. The fastening hardware is also important, as it can affect torque transmission. For example, forged screws are superior to broached screws in a number of ways, including reduced risk of reaming out. In addition, the material of the collar must be strong enough to withstand the torque required by the screw.
Shaft collars are complicated components. Their performance can determine the efficiency of an application. The design process is complex, and many factors are considered. Considerations include shaft geometry, bore size, and style. Shaft collar manufacturers will provide performance information on their website. If you are not satisfied with the information provided, you can contact the manufacturer.
Clamp-style shaft collars are made from high-quality materials. The metal used to produce them is lead-free and stainless, which resist corrosion. Moreover, these shaft collars have a high holding power, so they won’t mar your shaft and ensure proper alignment. These collars can be found in a variety of bore sizes, from 1/8″ to six inches.
Clamp-style shaft collars are available in lead-free steel, 303 and 316 stainless steel, and aluminum. They are available in a one-piece clamp or a two-piece clamp style. They are made of high-grade steel and are machined to a burr-free surface.
Clamp-style shaft collars have two-piece clamps that can be easily disassembled and installed in their proper position. Two-piece clamps are stronger than one-piece collars because all of the clamping force goes directly into the clamping shaft. Two-screw clamps have two and four-screws, and can also be wrench-tightened.
Set screw collars were one of the first shaft collars to be mass-produced. They were often used on line shafting in early manufacturing mills. While they can work well for simple shaft positioning, they’re not the most reliable option for complicated applications. Furthermore, set screws can cause damage to the shaft, making it difficult to reposition the collar or adjust its angle. For this reason, small flats are usually added to the shaft at set screw locations.
Set-screw shaft collars
Set-screw shaft collars are used to secure a shaft to a screw. They are available in several sizes and materials. Typical types include the solid, quick-release, split, and threaded styles. They come in an assortment of sizes and materials, including aluminum, zinc plated steel, and black oxide steel. Most are available in stock and are available in various sizes.
These collars come in many sizes and are ideal for use with standard round shafts. They are easy to install and disassemble and feature a high clamping power. They are also available in custom designs and materials. Set-screw shaft collars are available for use in various industries.
The company manufactures a variety of collars, including steel, zinc plated steel, and stainless steel. They also offer custom and adjustable collars. These collars are used in a variety of industries, including the food, chemical, pulp and paper, and wood industries. They are available with a variety of screw threads.
The screw and shaft material relationship must be compatible to ensure a secure fit. In addition, the shaft material should be softer than the screw material. For this reason, set-screw shaft collars are most effective when the shaft is made from softer material. Some setscrew shaft collars feature forged socket set screws to increase their holding power and torque capacity. Additionally, forged stainless steel set screws also increase their performance and hardness.
Shaft collars can be used on machines and transmission applications. They can be adjusted with a set screw or grub screw. In addition to setting the collar into place, a screw driver can also be used to adjust the grip on the collar. This type of shaft collar is often used in manufacturing applications.
Clamp-type collars are another type of shaft collars. These types allow the shaft to rotate and are used for mounting sensors and fixtures. These collars can be found in one-piece or two-piece styles. They can also be used in harsh environments.
Single split shaft collars
Single split shaft collars are used in many applications to protect the shaft from wear and tear. They are easy to install and disassemble, reducing downtime and labor costs. These collars utilize full seating torque of the set screws to apply equal force distribution around the shaft’s circumference, providing stronger holding power.
These shaft collars are available in a variety of materials. They are typically made from different types of steel, including stainless, alloyed steel, nylon, and aluminum. Some are even available in custom sizes. In addition to standard sizes, single split shaft collars also come in a variety of finishes, including black oxide and chrome.
Single split shaft collars come in metric and imperial sizes. They can be made of various materials, including zinc and lead-free steel. These collars are available with a black oxide finish for extra corrosion resistance. They are also available in 303 and 316 stainless steel. They can also be made from engineered plastics.
Single split shaft collars are the most popular style of shaft collars. They are easy to install and disassemble. They provide a tight fit and superior holding power over solid shaft collars. They are also easier to replace and can be used on a variety of shafts. In addition, single split shaft collars are easy to remove and adjust.
Single split shaft collars are available in a variety of bore sizes. They can fit shaft diameters from 1/8″ to four fifteen/16″. Ideally, the material used should be softer than the set screw. You can also choose between non-plated and chrome-plated collars. These collars are available in metric or imperial measurements.
Single split shaft collars are one-piece or two-piece designs. Single-piece shaft collars feature one screw and two-piece collars have two. They are easier to install than single-piece shaft collars and are suitable for lighter duty applications. Single split shaft collars are available in a variety of threaded bore sizes.
Single split shaft collars have a wide range of uses in industrial settings. They can secure bearings on shafts or locate components in motor assemblies. They can also function as mechanical stops. RS PRO offers a wide selection of shaft collars that meet and exceed industry standards.
editor by czh 2023-01-17
China Reusable Long Shaft Electric Vertical Turbine Water Pump shaft collar balls
Item Description
Lp (T) Series Electric Vertical Turbine H2o Pump
Applications
Municipal engineering
Market
Industrial architecture
Sewage treatment engineering
Outlined
LPT kind vertical drainage pump is mostly utilized for pumping no corrosion, temperature considerably less than 60º C, suspended solids (not including fiber, the grits) less than 150 mg/L articles of the sewage or squander drinking water. LPT variety vertical drainage pump is in LP variety vertical water pumps, and on the foundation of the increase and the collar, established the tube tube oil lubrication is h2o. Can smoke temperature underneath 60º C, ship to include a particular solid CZPT (this sort of as scrap iron and fantastic sand, coal, and so forth. ) of sewage or waste drinking water.
Company Info
Xihu (West Lake) Dis. group holds 5 industrial parks in ZheJiang , ZheJiang and ZHangZhoug and so on. locations in which the economic climate has been drastically produced, masking a total land region of 550 thousand square meters.
with the registered cash up to 5.38 billion CNY, the total money up to tens of billion CNY and the merchandise groups up to far more than 3000, ranging from h2o pump, motor, electric powered cabinet, valve, completed equipment, mechanical accessories and so forth. collection, and, because of the affordable functionality-price tag and trustworthy quality, broadly used in the fields of municipal performs, h2o conservancy, architecture, fire-fighting, electric power, environmental security, petroleum, chemical sector, mining and medication.
Streamlining solution manufacture middle
BROTHER digit-handle machine tools, borer, broacher, vertical lathe and huge special examination centre run through the creation flow line. Without having excellent generation equipments, there would not be superb items.
The spirit of tough function is especially introduced in the manufacturing procedure right here in Xihu (West Lake) Dis., even if a tiny screw, every little thing and each element is made meticulously and exhibits the professional good quality.
Xihu (West Lake) Dis. strictly follows ISO 9001 high quality management technique, ISO 4001, OHSAS 18000and so on. administration methods and the scientific and realistic circulation of procedure, making confident of a substantial powerful substantial quality creation method.
Merchandise Testing
The group organization now holds a huge pump test centre, a three-coordinate measurer, a dynamic-static measurer, a quick laser shaping instrument, a multi-purposeful shot-blasting equipment, an computerized argon-arc welder, a massive lathe, a big mill, numeral management equipment tools and so forth. a lot more than 2000 sets of various nationwide and globally innovative manufacturing and detection facilities and more than 4500 staff associates, of which 72.6% are graduated from schools and specialized educational institutions, 375 hold a junior title, 28 senior, 2 countrywide specialists and 5 professors. Each and every year this team puts a variety of funds for specialized innovation, item improvement and tools import and, up until now, holds up to 600 nationwide patent technologies and normally takes portion in the draft-out and edition of the two nationwide and industrial specifications, in overall of tens of the solution and complex expectations masking water conservancy, chemical sector, hearth-battling, metropolis h2o offer and so forth. fields.
Benefit Model & Exhibition
Xihu (West Lake) Dis. has compensated a lot consideration to the model design and expansion given that its establishment. The trademark of it was accepted as a resound trademark of China in 2006 and as a properly-known trademark of ZheJiang in 2003, 2006, 2009 successive 3 classes.From 2005, Xihu (West Lake) Dis. has begun exporting and manufacturer setting up in a large scale and, up till now, the customers in whole 110-odd nations and locations in the planet.
After provider:
Soon after support
To fulfill the customs, ZheJiang Xihu (West Lake) Dis. (Group) Co.,Ltd offers the consumers with just before-sale, in revenue and publish-sale complete respect services.
Merchandise of services
Complex training Products evaluation
Installation and debugging Troubleshoot
Maintenance Update and enhancement
Determination to the services
one. Following signing the deal , send out engineer for helping set up and debugging.
two. A single-12 months warranty. Offer technical support totally free all-life of the items.
3. Hold all-existence contacting with customers, get suggestions on use of the tools and make the items quality continually perfected.
four. Sizzling-line of support is available in 24h, responded in 8h.
|
US $100-1,000 / Piece | |
1 Piece (Min. Order) |
###
| Position of Pump Shaft: | Vertical Pump |
|---|---|
| Pump Casing Combined: | Verticaljoint Surface Pump |
| Usage: | Pump |
| Capacity: | 8~60000 Stere/H |
| Head: | 3~150 M |
| Power: | 1.5~3600kw |
###
| Customization: |
Available
|
|---|
|
US $100-1,000 / Piece | |
1 Piece (Min. Order) |
###
| Position of Pump Shaft: | Vertical Pump |
|---|---|
| Pump Casing Combined: | Verticaljoint Surface Pump |
| Usage: | Pump |
| Capacity: | 8~60000 Stere/H |
| Head: | 3~150 M |
| Power: | 1.5~3600kw |
###
| Customization: |
Available
|
|---|
Types of Shaft Collars
A shaft collar is a simple machine component that plays a critical role in power transmission. It is typically found in gearboxes and motors, and serves as a bearing face, mechanical stop, and locating component. Its simple design makes it easy to install and use. Its various functions make it a useful machine part for many applications.
Set screw shaft collars
Set screw shaft collars are used in many different applications and can be manufactured in a variety of materials. Typical materials include carbon steel, stainless steel, platinum, silver, nylon, polysulphone, PTFE, and PVC. Collars are easy to install and adjust. A variety of secondary services are available, including internal forming, chroming, and passivating.
Set screw shaft collars come in different styles, including standard collars, quick-release collars, split collars, and threaded collars. They can be purchased in standard and metric sizes, and are available in a variety of finishes. Standard collars are available in steel and stainless steel and have a zinc plated or black oxide finish.
Set screw shaft collars are an excellent choice for holding power transmission components in place and limiting shaft movement. They are held in place by a set screw that digs into the shaft material, providing holding power. They are available in both 303 and 316 Stainless Steel, making them a reliable and efficient choice for a variety of applications.
Clamping-style shaft collars
Clamp-style shaft collars are a versatile alternative to set-screw collars. They eliminate the problems associated with the set-screw collar, such as the possibility of shaft damage. They also lock in place by compressing against the shaft. This method distributes the force on the collar and shaft evenly, creating a stronger holding power.
Shaft collars are manufactured by many companies. You can buy them in-store or online, but it is important to buy from a reputable manufacturer. Many counterfeit collars endanger the life of your machine. Choosing a quality collar will help you avoid costly and time-consuming machine breakdowns.
Clamping-style shaft collars come in a variety of sizes and types. Some of them have a hex or D-bore. Some have circular grooves to assist with installation. They can be found in bore sizes from 1/4″ to one inch. They are often used for mounting gears, sprockets, and bearings.
Two-piece clamp collars are an excellent choice for high-load applications. They have improved clamping force and impressive holding power, and can be easily installed without major disassembly. Two-piece clamp collars can also be designed with a keyway to secure a keyed shaft. There are also special double-wide clamp collars for high axial load applications.
Another type of shaft collar is the quick clamping collar. It is an excellent choice for applications where you want to make frequent setup and adjustments. It allows for easy adjustments with minimal tools. Quick clamping collars feature a cam lever and a clamping lever. They are convenient and highly flexible, making them ideal for use in many industries.
Single split shaft collars
A single split shaft collar is designed to fit one shaft and eliminate two pieces. This makes installation and disassembly easy, reducing labor and downtime. It also uses a full seating torque of the set screws to distribute forces evenly around the shaft circumference, providing stronger holding power. It can be used on a wide range of rotating equipment.
Single split shaft collars are available from CZPT Products. They are a common, high-quality way to secure a shaft. They wrap around the shaft for a secure and tight fit. They are also a versatile option that can be easily removed. These collars can be used on both hard and soft standard round shafts. They provide superior grip compared to solid collars, provide tremendous axial force, and minimize shaft distortion.
Single split shaft collars are one of the many types of bearing shaft locking collars. They are made of EN8 steel, and come with a locking setscrew. This makes installing the collar quick and easy. The collar is available in many sizes, including small, medium, and large. If you do not find the right fit, you can also have one custom-made.
These collars are commonly used for mounting fixtures, sensors, and other assemblies. They are available in two-piece and one-piece styles, and have higher holding power than standard shaft collars. They are available in a wide range of materials, including 1215 lead-free steel, 303 stainless steel, and lightweight 2024 aluminum.
Aluminum shaft collars
The CZPT company produces Aluminum shaft collars for a variety of applications. These shaft collars feature a proprietary manufacturing process to ensure accurate face-to-bore perpendicularity. This helps to improve clamping forces and installation fit. Each collar features the CZPT name stamped on it, and the collar is finished with a black oxide process to achieve a fine glossy finish. The shaft collars are available in a variety of bore sizes and styles, and can be ordered in single or two-piece styles. Additionally, they are manufactured with a high-grade forged screw, which ensures the highest quality.
Aluminum shaft collars can be customized to fit your needs. Several accessories can be added to the shaft collar, such as steel mending plates. Those who need extra load capacity can select a keyed shaft collar. They are also available in lightweight styles. These shaft collars are easy to install and disassemble, and are made from two-piece aluminum for ease of installation.
Choosing the right shaft collar material is critical to the success of your application. You should consider steel, stainless steel, or aluminum for the best corrosion resistance. Steel is stronger and offers better holding power, while aluminum offers a lower weight and a favorable strength-to-weight ratio. When selecting shaft collars, it is important to take into consideration the corrosion resistance of each material. For example, carbon steel shaft collars will not be as corrosion resistant as aluminum shaft collars, but they are lighter and have a good hold power.
Carbon steel shaft collars
Carbon steel shaft collars are a versatile solution to holding bearings in place. They are available in a range of diameters and styles to meet your application needs. They can be used for many different applications, from aerospace and military applications to marine and automotive applications. These collars are available in a variety of materials, including carbon steel, aluminum, and stainless steel.
Carbon steel shaft collars are a cost-effective alternative to stainless steel shaft collars. CZPT manufactures lead-free carbon steel shaft collars, and they are also available with RoHS-compliant yellow zinc plating. Zinc plating is less expensive than stainless steel and is an excellent anti-corrosive option. CZPT yellow zinc collars are plated by a trivalent process rather than a non-compliant hexavalent process.
Shaft collars are available in both metric and inch bore sizes. They can be used for a variety of applications and are typically available in sizes ranging from 1/4″ to three inches. They are also available with metric screws in a range of sizes, which are useful for retrofitting equipment.
Shaft collars are available in a variety of materials, including carbon steel, 303 stainless steel, and aluminum. Some options feature threads and can be welded or bolted to shafts. For more advanced applications, aluminum threaded shaft collars can be used. They are often used for mounting sensors, fixtures, and other assemblies. They come in several styles, such as double-wide, heavy-duty, and threaded.
Hinge shaft collars
Hinge shaft collars are fastening devices that secure shafts or axles. They come in a wide range of sizes, shapes, and materials. These collars can be used in a wide range of applications, including non-rotary applications. They can be manufactured in stainless steel, 1018 steel, aluminum, and brass.
Shaft collars are simple to use but can perform a variety of functions. Their primary functions include holding components in place, locating components on a shaft, and establishing attachment between the shaft and another component. To choose the right collars for a specific application, designers should consider the design, style, materials, bore size, and geometry of the shaft. They should also consider any limitations or requirements associated with the application.
Hinge shaft collars are available in round and square bores. They are most commonly used in agricultural applications. Their size makes them easy to install, and their design makes them suitable for both large and small shafts. They are also used in situations where shafts are not easily accessible. Some types of shaft collars feature flat surfaces, which are great for mounting applications and splitting hubs.
Heavy duty shaft collars are also available. These collars have larger outer diameters, wider bores, and larger screw diameters. They are manufactured from lead-free steel with a proprietary black oxide finish.
editor by czh 2023-01-01