Tag Archives: bearing shaft

China best Agricultrual Bearing/ Hexagonal Bore Bearing /207krrb17/China Factory shaft collar aliexpress

Product Description

Agricultrual Bearing/ Hexagonal Bore Bearing /207krrb17/China Factory

Technology utilized for the production of the bearings provides significant advantages to customers due to minimal maintenance costs. Each bearing should have longer life span and should operate without any problems during the exploitation. However, it should be noted that certain external factors affect the quality of bearings as well. They should not be exposed to excessive heat and must be protected from ingress of foreign matter. Also, Bearings must be properly lubricated.

Modern ball bearings stand up to growing demands of operation in difficult conditions with increased productivity. Further development trends set demands for longer exploitation life under harsh conditions and more cost-effective design for agricultural machinery. CZPT bearings provide cost-effective solutions and are extensively applied in agricultural machinery production. These bearings are quick and easy to mount. Wide inner ring can be mounted on the shaft by the eccentric ring, screws or adapter sleeves. Seals are specially designed and fitted to the outer rings. The advantages of these bearings have led to their rapid adoption by manufacturers of agricultural machinery.

Each CZPT bearing is produced in accordance with strict premium quality standards.
-VAFEM bearing units consist of a housing which is made from either cast iron or pressed steel; The insert bearings inside have a self-aligning feature due to their spherical outer diameters and the corresponding design of the bearing housing. This feature allows for any static misalignment.

-Wider inner ring, hex bore, square bore, pressed housing, paint or zinc plating, double row and so on are available for better anti-corrosion performance.
–Various seals design is available, typically single, triple lips, as well as 6 lips are available based on different bearing arrangement and requirements for each application.
-Rings and ball Material, Rubber Seal, Grease, as well as internal design of bearings are carefully selected.
– When low temperature is required, we have solution to meet with it.
-When axial load is required, we have design of 4 point contact bearing to meet with it.

Also we can also provide design solution to meet with customer requirements, and we have been proven successful in helping OEM customers to provide comparable performance with more economical CZPT bearings.

 

NO. Model Number Sample Stock qty Seal Structure Bore shape Eccentric collar  Note
29 207KRRB17 2 Three lip seal circular /  
30 209KRRB2 1 Iron bonding hexagonal /  
31 210RRB6 1 Three lip seal hexagonal /  
32 CSA207-22 2 Iron bonding circular with  
33 F208G 1 / / / only housing
34 GW211PP3 2 Three lip seal square /  
35 GW211PPB2 2 Three lip seal circular /  
36 NA206NG 1 Iron bonding circular with  
37 SA207-20G   Iron bonding circular with no sample stock
38 SA207NG 2 Iron bonding circular with  
39 SA208-24NG   Iron bonding circular with no sample stock
40 SAAK205-16G 1 Iron bonding circular with with bearing housing
41 SBAK205-16G 1 Iron bonding circular / with bearing housing
42 SBLF206-20G 1 Iron bonding circular / with bearing housing
43 W208PPB12 1 Three lip seal square /  
44 W208PPB16 2 Three lip seal hexagonal /  
45 W208PPB7 2 Three lip seal circular /  
46 W210PPB5 2 Three lip seal circular /  
47 UCF208-24 1 Iron bonding circular / with bearing housing
48 FD211RBA 2 Three lip seal circular / with pressed
 steel housing
49 W208PP10 2 Three lip seal circular /  
50 DC209TTR10 2 Iron bonding circular /  
51 YET205-100-RSNC 2 Iron bonding circular / one side sealed while another open
52 W210PP4 2 Three lip seal square / 2/  2.6N.M
53 205DDS 2 Three lip seal circular /  
54 W208PPB5 1 Three lip seal square / developed for customer
55 NA208-24G 1 Three lip seal circular with developed for customer
56            

 

NO. Model Number Sample Stock qty Seal Structure Bore shape Eccentric collar  Note
1 88128-GG 2 Iron bonding circular /  
2 885152 2 Three lip seal mandrel / for water pump
3 204KRR2 2 Iron bonding hexagonal /  
4 204RR6 5 Iron bonding circular /  
5 205KPPB2 1 Three lip seal hexagonal /  
6 205NPP9 2 Three lip seal circular /  
7 206GGH 2 Three lip seal circular /  
8 206KRRB6 2 Three lip seal hexagonal /  
9 88506LLX 2 Iron bonding circular /  
10 CSA206-18 2 Iron bonding circular with  
11 206KRR6 2 Iron bonding hexagonal /  
12 FD211RM 2 Three lip seal square / with pressed    steel housing
13 GW208PPB6 2 Three lip seal square /  
14 GW209PPB13A 2 Three lip seal circular /  
15 GW209PPB4 2 Three lip seal circular /  
16 W208PP21 2 Three lip seal hexagonal /  
17 W208PP5 2 Three lip seal square /  
18 W208PP8 2 Three lip seal square /  
19 W208PPB8 2 Three lip seal square /  
20 W209PPB4 2 Three lip seal circular /  
21 W209PPB5 2 Three lip seal square /  
22 W211PP5 1 Three lip seal square /  
23 885151E 4 Gerneral mandrel / for water pump
24 NA205-15G 2 Iron bonding circular with  
25 NA206-18NG 2 Iron bonding circular with  
26 NA305NG 2 Three lip seal circular with  
27 SA205G 2 Iron bonding circular with  
28 SB207-23G 1 Iron bonding circular /  

Type: Agricultrual Bearings
Usage: Agricultural Products Processing, Harvester, Planting and Fertilization
Material: Chrome Steel & Iron Casting
Power Source: Gasoline
Weight: 2lbs
Bore Shape: Hexagonal
Customization:
Available

|

Customized Request

Shaft Collar

Choosing a Shaft Collar

The shaft collar is a simple machine component used in a variety of power transmission applications. They are most often found on gearboxes and motors. Their simple design makes them an easy component to install and remove. Among other uses, shaft collars are used as bearing faces, mechanical stops, and locating components.

Clamp-style shaft collars

Clamp-style shaft collars fix many of the problems associated with set-screw collars. Available in two-piece and one-piece designs, these collars compress the shaft and lock into place. This allows for a uniform distribution of force on the shaft. Clamp-style shaft collars provide more holding power than set-screw collars, but they work best under consistent pressure. Clamp-style shaft collars also work better against negative forces, as they have a separate, un-tightened side.
Clamp-style shaft collars feature mounting holes in the outer diameter. Like clamp-style collars, mountable shaft collars can be installed on adjacent assemblies, but the mounting method does not affect holding power. Mountable shaft collars are commonly used in mounting sensor brackets. They may have rounded or flat outer diameters to accommodate the mounting process. Mountable shaft collars may also have tapped or flat holes to facilitate installation.
Quick-clamp shaft collars have the same functionality as clamp-style collars, but feature a removable lever. They are typically quick-to-install and do not mar the shaft. Quick-clamping collars are especially beneficial in applications that require light-duty torque. They also make for quick and easy adjustments.
Heavy-duty shaft collars feature larger outer diameters, a wider face, and a larger screw. These collars are ideally suited for d-shafting and can offer greater holding power than set-screw collars. These collars are typically manufactured from high-strength 2024 aluminum.
Clamp-style shaft collars can be used in many different applications. They can be used for a variety of applications, including bearings, and are especially suited for rotary machines. However, there are some drawbacks. While they may not be as flexible as set-screw collars, they can still perform well under constant loads. One drawback is that they tend to loosen under shocks and reduce the holding power of clamping hardware.
Another advantage of clamp-style shaft collars is that they do not mar the shaft and allow for easy positioning adjustments. Furthermore, they are easier to install and offer greater holding power than set-screw collars. These collars are made from high-quality materials with tight tolerances and are available in different bore sizes.
Clamp-style shaft collars are the most common type of shaft collars. They can be two-piece or one-piece. Among these, two-piece collars are the most convenient option. One-piece collars are hard to move, and two-piece collars have a hinge on one side and a clamp-style collar on the other side.
The materials used in Clamp-style shaft collars play a crucial role in their overall performance. They should be strong, corrosion-resistant, and have good holding power. They should also be able to withstand high temperatures. The most common materials used for shaft collars are steel and aluminum. Some types are made from stainless steel, while others are made from engineered plastic.
Clamp-style shaft collars can come in two pieces or single-piece designs. The smaller one-piece collars usually have a back-cut opposite the clamp cut, which reduces the cross-sectional area at the hinge point. This reduces the amount of force required to clamp the collar, which makes it easier to use stronger screws.
Shaft Collar

Aluminum, carbon steel, and stainless steel shaft collars

When choosing a shaft collar, you should consider the material it is made of. You can purchase collars made of carbon steel, aluminum, or stainless steel. Each of these materials has its benefits and disadvantages. Steel is more durable than aluminum and tends to provide better holding power. Aluminum, on the other hand, is lighter and has a favorable strength-to-weight ratio. The material you choose should depend on your specific needs, such as corrosion resistance or weight.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. These collars are available with outer diameter holes, flats, or quick-release designs. The material used to make these collars varies, with standard models made of 1215 lead-free steel and 2024 aluminum.
When choosing shaft collars, take into account the material and surface treatment. Different materials offer different properties, which will determine the performance of the collar. In addition to material, each shaft collar comes with a different holding power. Holding power is a key factor in choosing a shaft collar because it determines the amount of load it can withstand without slipping. The holding power depends on the screw size, the bore size, and the bulk of the collar.
Aluminum, carbon steel, and stainless steel shaft-collars can come in various styles. CZPT, for example, offers standard shaft collars in hex and d-bore profiles. Hex collars provide extra holding power and are better than set screws. Additionally, they do not mar the shaft and provide a better grip.
Another type of shaft collar is the quick-clamp shaft collar. These features allow users to install and remove them with ease. The quick-clamp collar has a handle that allows the user to quickly adjust it. While these shaft collars are designed for light duty applications, they are not recommended for heavy-duty or high-RPM applications.
Shaft collars are simple yet versatile components. They are used for various applications, including mechanical stops, stroke limiters, and retainers. They can also be used to align and space other components. Shaft collars are widely used in gearbox assemblies, flagpoles, and medical instruments, among others.
Two-piece shaft collars offer the same benefits of one-piece shaft collars, but offer additional convenience and versatility. They are easier to install and disassemble, reducing installation and labor costs. They also offer superior holding power. They also feature a threaded bore that acts as a positive mechanical stop when the shaft is rotated.
Shaft Collar

Over-torqueing shaft collars

Shaft collars are often used to secure components on shafts or other surfaces. They also provide an easy way to adjust the positioning of motor assembly components. Many different types of shaft collars are available to meet the specific needs of different applications. These include round, hexagonal, square, and D-bore collars.
The design of shaft collars must account for the load they will support. Some collars are made of metals, while others are made of plastic or composite materials. Typically, shaft collars are made of steel, but can also be made from aluminum or alloyed steel. Some are coated with zinc.
Shaft collars are available in one-piece and two-piece designs. Single-piece collars are designed to fit securely around a shaft, while double-piece collars allow for greater clamping force. These collars can be assembled anywhere along the shaft and can be installed between two pieces. They are available in different bore configurations and can be customized to meet your specific application.
Clamp style collars are easy to install and disassemble, and have a larger holding force than one-piece collars. These collars are also more shock-load resistant. They also don’t mar shaft surfaces, unlike setscrews. They can also be easily adjusted without damaging the shaft. Another style of collar is the quick-clamping style. This type of collar doesn’t mar the shaft, and is easily installed and removed without tools. These are best for light-duty applications.
When choosing a shaft collar, you should consider the tolerance of the shaft. It is important to select a shaft with a tight tolerance. The shaft’s hardness should not be greater than Rockwell C35. A wide tolerance will affect the holding power of the collar. If the shaft is undersized, you may need to use a screwdrive to slide the collar on the shaft.
Shaft collars are a versatile component with many different applications. They can secure industrial railings or serve as positioning devices in medical equipment. They are also widely used in automation machinery. They are used to protect cylinders and actuators and to ensure alignment between components. For this reason, they are very versatile and adaptable.
Clamp-style collars work well under constant loads, but they may need assistance during impact loads. Shock loads can be difficult to avoid, especially if the mass is small. Clamp-style collars with an undercut in the shaft help to resist the impact of shock. Moreover, they offer positive stops in both axial directions.
Clamp-style shaft collars are a good alternative for set-screw collars. They are easy to install and prevent shaft damage. They also come with an added advantage of being easy to adjust. Clamp-style shaft collars have double the holding power of set-screw collars.
In addition to holding components, shaft collars can also function as spacers and limit shaft movement. They are essential for many applications. They are commonly used in motors and gearboxes to ensure correct positioning for power transmission. They are also used to control shaft movement in reciprocating applications.
China best Agricultrual Bearing/ Hexagonal Bore Bearing /207krrb17/China Factory   shaft collar aliexpressChina best Agricultrual Bearing/ Hexagonal Bore Bearing /207krrb17/China Factory   shaft collar aliexpress
editor by CX 2023-11-14

China manufacturer 3 Circuits 4A Mercury Rotary Connector for Lighting Use bearing shaft collar

Product Description

PS: Please kindly send us exact technical requirments so that we can recommend you the best solution. Thanks for your understanding!

General Description

Mercury slip ring enjoys the same performance just like other electrical sliprings, both of them are a device which could provide 360 degree rotations to transmit signal and power between stator side and rotor side of different industry equipments. No doubt, mercury slip ring just take advantage of mercury contact as a conductive media, which only could transfer current and signal via liquid metal under normal temperature status. This kind of slip ring has the main feature of strong stability, high precious signal and no noise. Meanwhile, compared with the traditional mechanical sliprings, this mercury rotary connector is smaller size, earlier installation and free maintenance, etc. Mercury slip rings provide the most scientific, economical and profitable rotary solution for various application industries. 

Features:

1.High work speed & big current.
2.Less than 1mΩ contact resistance, no noise.
3.Compact structure, easy installation and smooth operation.
4.Free maintenance and more durable than traditional slip ring.
5.Apply to any rotating device to transmit various signal and power.
6.Non-mercury slip ring is optional ( Conform to CE, RoHs certification ).
7.Stainless steel and aluminum alloy housing is optional.
8.Contact pin and lead wire installation is optional.

 

Application:

1.Rotating table, rotating camera and ratary lamp box.
2.Cable wheel, winding machine.
3.Resistors cutting machine.
4.Robot arm.
5.Wind turbine generator.
6.Medical equipment, spinning LED CZPT board.
7.Manufacturing and handling control machine.

Notices:
1.Not exceed the max temperature 60ºC(140°F ), ambient temperature + self heating.
2.Vertical mounting and storage should keep the U P in the up direction.
3.Mounting into a shaft should keep no eccentricity.
4.Do not solder on the connector and terminal.
5.Connect the connector on the terminal only a few times, losing connection will cause heating when apply electrical power.
6.Vibration will cause service life shorter.
7.The rotary connector can be mounted by the body or plastic collar, but it can not carry mechanical loads. Another end should be connected floating hold by electric wire.
8.The uppers notice should be kept, otherwise, it will cause the rotary connector failure or shorten service life.

Specification:
 

Product Model A3S
Circuits & Current 3 Circuits @ 4A
Voltage Rating 250VAC/DC
Max Frequency 200MHz
Max Work Speed 1800RPM
Work Temperature -30ºC~+60ºC
Torque 100gm

Remarks: Transferring micro voltage, current, EMF,thermocouple,strain gauge, audio, video,high frequency signal,etc.

 
Drawing:

Highly apprecaited for your support and interest. Welcome your consulting and contacting!

Certification: ISO9001, RoHS, CE
Transmission Medium: Mercury
Circuits: 3 Circuits
Current Rating: 4A
Work Speed: 1800rpm
Voltage Rating: 250VAC/DC
Customization:
Available

|

Customized Request

Shaft Collar

Choosing a Shaft Collar

The shaft collar is a simple machine component used in a variety of power transmission applications. They are most often found on gearboxes and motors. Their simple design makes them an easy component to install and remove. Among other uses, shaft collars are used as bearing faces, mechanical stops, and locating components.

Clamp-style shaft collars

Clamp-style shaft collars fix many of the problems associated with set-screw collars. Available in two-piece and one-piece designs, these collars compress the shaft and lock into place. This allows for a uniform distribution of force on the shaft. Clamp-style shaft collars provide more holding power than set-screw collars, but they work best under consistent pressure. Clamp-style shaft collars also work better against negative forces, as they have a separate, un-tightened side.
Clamp-style shaft collars feature mounting holes in the outer diameter. Like clamp-style collars, mountable shaft collars can be installed on adjacent assemblies, but the mounting method does not affect holding power. Mountable shaft collars are commonly used in mounting sensor brackets. They may have rounded or flat outer diameters to accommodate the mounting process. Mountable shaft collars may also have tapped or flat holes to facilitate installation.
Quick-clamp shaft collars have the same functionality as clamp-style collars, but feature a removable lever. They are typically quick-to-install and do not mar the shaft. Quick-clamping collars are especially beneficial in applications that require light-duty torque. They also make for quick and easy adjustments.
Heavy-duty shaft collars feature larger outer diameters, a wider face, and a larger screw. These collars are ideally suited for d-shafting and can offer greater holding power than set-screw collars. These collars are typically manufactured from high-strength 2024 aluminum.
Clamp-style shaft collars can be used in many different applications. They can be used for a variety of applications, including bearings, and are especially suited for rotary machines. However, there are some drawbacks. While they may not be as flexible as set-screw collars, they can still perform well under constant loads. One drawback is that they tend to loosen under shocks and reduce the holding power of clamping hardware.
Another advantage of clamp-style shaft collars is that they do not mar the shaft and allow for easy positioning adjustments. Furthermore, they are easier to install and offer greater holding power than set-screw collars. These collars are made from high-quality materials with tight tolerances and are available in different bore sizes.
Clamp-style shaft collars are the most common type of shaft collars. They can be two-piece or one-piece. Among these, two-piece collars are the most convenient option. One-piece collars are hard to move, and two-piece collars have a hinge on one side and a clamp-style collar on the other side.
The materials used in Clamp-style shaft collars play a crucial role in their overall performance. They should be strong, corrosion-resistant, and have good holding power. They should also be able to withstand high temperatures. The most common materials used for shaft collars are steel and aluminum. Some types are made from stainless steel, while others are made from engineered plastic.
Clamp-style shaft collars can come in two pieces or single-piece designs. The smaller one-piece collars usually have a back-cut opposite the clamp cut, which reduces the cross-sectional area at the hinge point. This reduces the amount of force required to clamp the collar, which makes it easier to use stronger screws.
Shaft Collar

Aluminum, carbon steel, and stainless steel shaft collars

When choosing a shaft collar, you should consider the material it is made of. You can purchase collars made of carbon steel, aluminum, or stainless steel. Each of these materials has its benefits and disadvantages. Steel is more durable than aluminum and tends to provide better holding power. Aluminum, on the other hand, is lighter and has a favorable strength-to-weight ratio. The material you choose should depend on your specific needs, such as corrosion resistance or weight.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. These collars are available with outer diameter holes, flats, or quick-release designs. The material used to make these collars varies, with standard models made of 1215 lead-free steel and 2024 aluminum.
When choosing shaft collars, take into account the material and surface treatment. Different materials offer different properties, which will determine the performance of the collar. In addition to material, each shaft collar comes with a different holding power. Holding power is a key factor in choosing a shaft collar because it determines the amount of load it can withstand without slipping. The holding power depends on the screw size, the bore size, and the bulk of the collar.
Aluminum, carbon steel, and stainless steel shaft-collars can come in various styles. CZPT, for example, offers standard shaft collars in hex and d-bore profiles. Hex collars provide extra holding power and are better than set screws. Additionally, they do not mar the shaft and provide a better grip.
Another type of shaft collar is the quick-clamp shaft collar. These features allow users to install and remove them with ease. The quick-clamp collar has a handle that allows the user to quickly adjust it. While these shaft collars are designed for light duty applications, they are not recommended for heavy-duty or high-RPM applications.
Shaft collars are simple yet versatile components. They are used for various applications, including mechanical stops, stroke limiters, and retainers. They can also be used to align and space other components. Shaft collars are widely used in gearbox assemblies, flagpoles, and medical instruments, among others.
Two-piece shaft collars offer the same benefits of one-piece shaft collars, but offer additional convenience and versatility. They are easier to install and disassemble, reducing installation and labor costs. They also offer superior holding power. They also feature a threaded bore that acts as a positive mechanical stop when the shaft is rotated.
Shaft Collar

Over-torqueing shaft collars

Shaft collars are often used to secure components on shafts or other surfaces. They also provide an easy way to adjust the positioning of motor assembly components. Many different types of shaft collars are available to meet the specific needs of different applications. These include round, hexagonal, square, and D-bore collars.
The design of shaft collars must account for the load they will support. Some collars are made of metals, while others are made of plastic or composite materials. Typically, shaft collars are made of steel, but can also be made from aluminum or alloyed steel. Some are coated with zinc.
Shaft collars are available in one-piece and two-piece designs. Single-piece collars are designed to fit securely around a shaft, while double-piece collars allow for greater clamping force. These collars can be assembled anywhere along the shaft and can be installed between two pieces. They are available in different bore configurations and can be customized to meet your specific application.
Clamp style collars are easy to install and disassemble, and have a larger holding force than one-piece collars. These collars are also more shock-load resistant. They also don’t mar shaft surfaces, unlike setscrews. They can also be easily adjusted without damaging the shaft. Another style of collar is the quick-clamping style. This type of collar doesn’t mar the shaft, and is easily installed and removed without tools. These are best for light-duty applications.
When choosing a shaft collar, you should consider the tolerance of the shaft. It is important to select a shaft with a tight tolerance. The shaft’s hardness should not be greater than Rockwell C35. A wide tolerance will affect the holding power of the collar. If the shaft is undersized, you may need to use a screwdrive to slide the collar on the shaft.
Shaft collars are a versatile component with many different applications. They can secure industrial railings or serve as positioning devices in medical equipment. They are also widely used in automation machinery. They are used to protect cylinders and actuators and to ensure alignment between components. For this reason, they are very versatile and adaptable.
Clamp-style collars work well under constant loads, but they may need assistance during impact loads. Shock loads can be difficult to avoid, especially if the mass is small. Clamp-style collars with an undercut in the shaft help to resist the impact of shock. Moreover, they offer positive stops in both axial directions.
Clamp-style shaft collars are a good alternative for set-screw collars. They are easy to install and prevent shaft damage. They also come with an added advantage of being easy to adjust. Clamp-style shaft collars have double the holding power of set-screw collars.
In addition to holding components, shaft collars can also function as spacers and limit shaft movement. They are essential for many applications. They are commonly used in motors and gearboxes to ensure correct positioning for power transmission. They are also used to control shaft movement in reciprocating applications.
China manufacturer 3 Circuits 4A Mercury Rotary Connector for Lighting Use   bearing shaft collarChina manufacturer 3 Circuits 4A Mercury Rotary Connector for Lighting Use   bearing shaft collar
editor by CX 2023-11-11

China supplier 40mm to 100mm 1/4 to 4 Inch Set Screw Double Split Shaft Clamp Collar for Bearing Mounting browning shaft collar

Product Description

 

Certification ISO9001:2018;SGS;TS16949
Quality 

CNC machine, CNC Turning, CNC Milling, CNC center machine,

auto lathe machine, Wire-cutting Machine
, CNC Laser cutting machines, CNC bending machines, 

CNC punching machines, CNC bending machines

CNT stamping machine, CNC/auto lathe machine,

Drilling machine, Hydraulic machine, Riveting machine,

Tapping machine, welding machine, Film attaching machine, etc.

Materials

Aluminum, Steel, SPCC, SGCC,SECC,

SPTE, Stainless steel, Brass, Copper, 

Bronze, ABS, PC, PO, POM, Nylon,  etc.

Surface finish

Anodized, Oxide, Plating, Brushing, Polishing, Blackened, Powder coating, 

Sandblasting, Laser engraving Zn-plating, Ni-plating, Cr-plating, Tin-plating,

copper-plating, the wreath oxygen resin spraying, the heat disposing,

hot-dip galvanizing, black oxide coating, painting, powdering, color zinc-plated,

blue-black zinc-plated, rust preventive oil, titanium alloy galvanized,

silver plating, plastic, electroplating, anodizing, etc

Inspection Equipment

CMM, Projection, Calipers, Micro caliper, Thread Micro caliper, 

Pin gauge, Caliper gauge, Pass meter, Pass meter, etc.

Drawing formation PDF, CAD/DWG/DXF, IGS/STP etc.

HangZhou CZPT Industrial Co., Ltd. is a comprehensive factory that specialized in fasteners, CNC parts, stamping parts, machinery parts, and so on. Since the establishment of the company, we have passed ISO9001: 2018, SGS, TS16949.
Our factory covers an area of 5,000 square CZPT and has 58 employees, including 5 R & D personnel and 5 quality inspection personnel.
Major areas of service include automotive, bicycle and motorcycle, industrial automation, agricultural equipment, digital electronics, medical equipment, and so on.
Looking CZPT to your cooperation.

1. We have Specialized QC testers to check the products quality according to customers’ needs.

2. We have IQC to check the dimensions and surface of the incoming material.

3. We have PQC to inspect  full-course during the processing.

4. We have FQC to inspect all the plating products from outsides and make the 100% inspection before the shipments.

FAQ:

 

Q1: Why choose ZheJiang n?
To provide our customers with first-class services in the supply of quality screws minimizing costs.

 

Q2: How is quality ensured?
All our processes strictly adhere to ISO9001:2018 procedures. We have strict quality control from producing to delivery. Our company had strong technology support, 80% of our colleagues are master or bachelor’s degree. We have cultivated a group of managers who are familiar with product quality , good at modern concept of management.

 

Q3: Can You Strictly Follow The Tolerance on The Drawing And Meet The High Precision?
Yes, we can, we can provide high precision parts and make the parts as your drawing.

 

Q4: How should I order and make payment?
By T/T, for samples 100% with the order; for production, 30% paid for deposit by T/T before production arrangement, the balance to be paid before shipment. negotiation accepted.

Q5: What’s your Delivery Time?
Standard parts: 7-20days
Non-standard parts: 15-25days
We will make the delivery as soon as possible with the guarantee quality

 

Q6:How to Custom-made (OEM/ODM)?
If you have a new product drawing or a sample, please send to us, and we can custom-made the as your required. We will also provide our professional advices of the products to make the design to be more realized & maximize the performance.

Q7:Which mode of transport would be better?
In general, the product are heavy, we advice to make delivery by sea, Also we respect your views of other transportation as well.

 

Standard Or Nonstandard: Standard
Shaft Hole: 8-24
Torque: >80N.M
Bore Diameter: 19mm
Speed: 8000r/M
Structure: Rigid
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

shaft clamp

What are the temperature resistance properties of split collars?

The temperature resistance properties of split collars vary depending on the material they are made from. Here’s a general overview of temperature resistance for common split collar materials:

  • 1. Steel Split Collars: Steel split collars can generally withstand a wide range of temperatures. Standard steel split collars are suitable for temperatures from -40°C to 250°C (-40°F to 482°F). For higher-temperature applications, heat-resistant steel alloys may be used.
  • 2. Aluminum Split Collars: Aluminum split collars have a temperature resistance range of approximately -40°C to 150°C (-40°F to 302°F). They are lighter than steel but may not be suitable for extremely high-temperature environments.
  • 3. Stainless Steel Split Collars: Stainless steel split collars are highly corrosion-resistant and can endure a wide temperature range. They are suitable for temperatures from -100°C to 300°C (-148°F to 572°F) and often used in harsh environments.
  • 4. Plastic Split Collars: The temperature resistance of plastic split collars varies with the type of plastic. Common plastics like nylon and acetal have a range of -40°C to 80°C (-40°F to 176°F). Some specialty plastics offer higher temperature resistance, up to 150°C (302°F).
  • 5. Industry-Specific Materials: In some industries, specialty materials with enhanced temperature resistance are used. For example, aerospace applications may require split collars made from materials capable of withstanding extreme temperature fluctuations encountered during flight.
  • 6. Coatings and Treatments: In addition to the base material, coatings and treatments can improve the temperature resistance of split collars. For example, heat-resistant coatings can extend the upper temperature limit.

It’s important to consult the manufacturer’s specifications for specific split collar products to determine their exact temperature resistance properties. When selecting split collars for applications in extreme temperature conditions, consider not only the collar material but also factors like the duration of exposure and the presence of additional heat-resistant treatments.

shaft clamp

Where can I purchase split collars with specific certifications for certain industries?

Purchasing split collars with specific certifications for particular industries is crucial to meet safety and regulatory requirements. Here are some sources where you can find certified split collars:

  • 1. Industrial Suppliers: Many industrial suppliers and distributors offer a range of certified split collars designed for specific industries. These suppliers often have a variety of certifications to meet regulatory standards.
  • 2. Manufacturer Websites: The official websites of split collar manufacturers typically provide information on certified products. You can directly contact manufacturers to inquire about certifications and place orders.
  • 3. Specialized Industrial Stores: Some specialized industrial stores focus on specific industries, such as aerospace or medical. These stores are likely to carry certified split collars tailored to those industries.
  • 4. Trade Shows and Exhibitions: Attending industry-specific trade shows and exhibitions can connect you with manufacturers and suppliers who specialize in certified components, including split collars.
  • 5. Online Marketplaces: Online marketplaces often list split collars with detailed product information, including certifications. You can filter search results to find collars that meet your industry’s requirements.
  • 6. Industry Associations: Industry associations related to your specific field may provide recommendations or directories of certified suppliers. These associations often collaborate with trusted suppliers.
  • 7. Local Distributors: Check with local distributors who may have knowledge of suppliers offering certified split collars for your industry. Local sources can be convenient for quick procurement.
  • 8. B2B (Business-to-Business) Platforms: Some B2B platforms cater to industrial and manufacturing needs, offering a wide range of certified components, including split collars.
  • 9. Custom Manufacturing: In cases where standard certified collars are not readily available, consider working with manufacturers who offer custom fabrication services to meet industry-specific requirements.

When purchasing certified split collars, ensure that you request and verify the relevant certifications, such as quality management certifications (e.g., ISO 9001) or industry-specific certifications (e.g., aerospace or medical certifications). It’s essential to adhere to industry standards and regulations for safety and compliance in your applications.

shaft clamp

What factors should I consider when choosing a split collar for a specific shaft size?

Choosing the right split collar for a specific shaft size is crucial to ensure a secure and reliable connection. Several factors should be considered during the selection process:

  1. 1. Shaft Diameter: Measure the diameter of the shaft accurately. The inner diameter of the split collar should match the shaft size precisely to ensure a proper fit and grip.
  2. 2. Collar Material: Select a collar made from a material suitable for your application. Common materials include steel, aluminum, and stainless steel. Consider factors such as strength, corrosion resistance, and environmental compatibility.
  3. 3. Shaft Material: The material of the shaft is important, as it affects compatibility with the collar material. Ensure that the collar material is compatible with the shaft material to prevent galvanic corrosion or excessive wear.
  4. 4. Environmental Conditions: Consider the operating environment. If the application is exposed to moisture, chemicals, or extreme temperatures, choose a collar with the appropriate corrosion resistance and environmental seals if necessary.
  5. 5. Load and Torque: Determine the load and torque requirements of your application. Select a split collar that can handle the expected forces without deforming or slipping on the shaft.
  6. 6. Collar Type: Choose the appropriate collar type, such as a single-split or double-split collar, based on your application’s requirements. Double-split collars provide greater holding power but may require more space on the shaft.
  7. 7. Locking Mechanism: Different split collars use various locking mechanisms, including set screws, clamping screws, or levers. Consider the ease of installation and removal, and the effectiveness of the locking mechanism for your application.
  8. 8. Space Limitations: Evaluate the available space on the shaft. Ensure that the split collar can be installed without interference from adjacent components or other collars on the same shaft.
  9. 9. Reusability: Determine if the split collar needs to be reusable. Some collars can be removed and reinstalled multiple times, while others may be designed for permanent installations.
  10. 10. Precision Requirements: For applications requiring precise positioning, choose a split collar with tight tolerances and accurate machining to ensure proper alignment of components.
  11. 11. Special Features: Some split collars offer additional features, such as vibration damping, environmental sealing, or keyways. Assess whether these features are necessary for your application.
  12. 12. Budget Constraints: Consider your budget and the cost of the split collar. While quality is essential, it’s important to find a balance between performance and cost-effectiveness.

By taking these factors into account, you can make an informed decision when choosing a split collar that suits your specific shaft size and application requirements.

China supplier 40mm to 100mm 1/4 to 4 Inch Set Screw Double Split Shaft Clamp Collar for Bearing Mounting   browning shaft collarChina supplier 40mm to 100mm 1/4 to 4 Inch Set Screw Double Split Shaft Clamp Collar for Bearing Mounting   browning shaft collar
editor by CX 2023-11-08

China wholesaler Custom Carbon Stainless Steel Big Size Clamp Bearing Mounting Double Split Shaft Collar brass shaft collar

Product Description

Certification ISO9001:2018;SGS;TS16949
Quality 

CNC machine, CNC Turning, CNC Milling, CNC center machine,

auto lathe machine, Wire-cutting Machine
, CNC Laser cutting machines, CNC bending machines, 

CNC punching machines, CNC bending machines

CNT stamping machine, CNC/auto lathe machine,

Drilling machine, Hydraulic machine, Riveting machine,

Tapping machine, welding machine, Film attaching machine, etc.

Materials

Aluminum, Steel, SPCC, SGCC,SECC,

SPTE, Stainless steel, Brass, Copper, 

Bronze, ABS, PC, PO, POM, Nylon,  etc.

Surface finish

Anodized, Oxide, Plating, Brushing, Polishing, Blackened, Powder coating, 

Sandblasting, Laser engraving Zn-plating, Ni-plating, Cr-plating, Tin-plating,

copper-plating, the wreath oxygen resin spraying, the heat disposing,

hot-dip galvanizing, black oxide coating, painting, powdering, color zinc-plated,

blue-black zinc-plated, rust preventive oil, titanium alloy galvanized,

silver plating, plastic, electroplating, anodizing, etc

Inspection Equipment

CMM, Projection, Calipers, Micro caliper, Thread Micro caliper, 

Pin gauge, Caliper gauge, Pass meter, Pass meter, etc.

Drawing formation PDF, CAD/DWG/DXF, IGS/STP etc.

HangZhou CZPT Industrial Co., Ltd. is a comprehensive factory that specialized in fasteners, CNC parts, stamping parts, machinery parts, and so on. Since the establishment of the company, we have passed ISO9001: 2018, SGS, TS16949.
Our factory covers an area of 5,000 square CZPT and has 58 employees, including 5 R & D personnel and 5 quality inspection personnel.
Major areas of service include automotive, bicycle and motorcycle, industrial automation, agricultural equipment, digital electronics, medical equipment, and so on.
Looking CZPT to your cooperation.

1. We have Specialized QC testers to check the products quality according to customers’ needs.

2. We have IQC to check the dimensions and surface of the incoming material.

3. We have PQC to inspect  full-course during the processing.

4. We have FQC to inspect all the plating products from outsides and make the 100% inspection before the shipments.

FAQ:

 

Q1: Why choose ZheJiang n?
To provide our customers with first-class services in the supply of quality screws minimizing costs.

 

Q2: How is quality ensured?
All our processes strictly adhere to ISO9001:2018 procedures. We have strict quality control from producing to delivery. Our company had strong technology support, 80% of our colleagues are master or bachelor’s degree. We have cultivated a group of managers who are familiar with product quality , good at modern concept of management.

 

Q3: Can You Strictly Follow The Tolerance on The Drawing And Meet The High Precision?
Yes, we can, we can provide high precision parts and make the parts as your drawing.

 

Q4: How should I order and make payment?
By T/T, for samples 100% with the order; for production, 30% paid for deposit by T/T before production arrangement, the balance to be paid before shipment. negotiation accepted.

Q5: What’s your Delivery Time?
Standard parts: 7-20days
Non-standard parts: 15-25days
We will make the delivery as soon as possible with the guarantee quality

 

Q6:How to Custom-made (OEM/ODM)?
If you have a new product drawing or a sample, please send to us, and we can custom-made the as your required. We will also provide our professional advices of the products to make the design to be more realized & maximize the performance.

Q7:Which mode of transport would be better?
In general, the product are heavy, we advice to make delivery by sea, Also we respect your views of other transportation as well.

 

Standard Or Nonstandard: Standard
Shaft Hole: 8-24
Torque: >80N.M
Bore Diameter: 19mm
Speed: 8000r/M
Structure: Rigid
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

shaft clamp

Can you provide examples of successful case studies where split collars improved machine performance?

Certainly! There are numerous case studies where the use of split collars has significantly improved machine performance and reliability. Here are a few examples:

1. Conveyor Systems Optimization: In a large manufacturing facility, the conveyor system used to transport heavy components was facing issues with misalignment and frequent maintenance due to traditional set-screw collars slipping on the shafts. By replacing these collars with split collars featuring precision clamping, the facility reduced downtime, improved alignment, and increased the overall efficiency of the conveyor system.

2. Food Processing Machinery: A food processing plant required collars for their machinery that met strict hygiene and cleanliness standards. They switched to split collars made from food-grade materials. This change not only ensured compliance with food safety regulations but also reduced the risk of contamination and improved maintenance due to the ease of disassembly and cleaning.

3. Agricultural Equipment: A manufacturer of agricultural machinery needed a solution for securing sprockets on rotating shafts. Traditional set-screw collars were causing shaft damage due to over-tightening. By using split collars with a self-locking mechanism, they eliminated damage to the shafts, reduced maintenance costs, and increased the durability of their equipment.

4. Industrial Mixers: A company that produced industrial mixers experienced frequent downtime and misalignment issues with their mixers’ shaft components. Switching to split collars with quick-release mechanisms allowed for faster maintenance and component replacement, reducing downtime and improving overall production output.

5. Aerospace Applications: In the aerospace industry, precision and reliability are critical. Split collars have been used to secure components in aircraft and spacecraft. Their ability to provide precise positioning and easy adjustment has improved the alignment of critical components, enhancing the overall performance and safety of aerospace systems.

6. Material Handling: Material handling systems in warehouses and distribution centers rely on conveyor rollers and pulleys. The use of split collars in these systems has simplified maintenance and reduced the need for specialized tools, resulting in cost savings and increased system uptime.

7. Medical Devices: Medical equipment manufacturers have turned to split collars for applications where precision and cleanliness are paramount. By using split collars with self-locking features, they have improved the performance of medical devices and reduced the risk of contamination in healthcare settings.

These case studies demonstrate how split collars have been successfully implemented in various industries to address specific challenges, improve machine performance, and enhance overall reliability. The choice of split collars has resulted in reduced maintenance, increased efficiency, and cost savings in these applications.

shaft clamp

Can you provide recommendations for cost-effective split collars catering to different budget constraints?

Cost-effective split collars are available to cater to various budget constraints. Here are some recommendations based on different budget levels:

  • 1. Economy Split Collars: For tight budgets, consider economy split collars made from materials like steel or zinc-plated steel. These collars are cost-effective and provide reliable performance for many applications.
  • 2. Plastic Split Collars: Plastic split collars, such as those made from nylon or acetal, are often affordable and suitable for budget-conscious projects. They are lightweight and corrosion-resistant.
  • 3. Single-Split Collars: Single-split collars are generally more budget-friendly than double-split or triple-split versions. While they provide effective shaft clamping, they may have slightly lower holding power.
  • 4. Basic Materials: Opt for split collars made from basic materials, such as steel or aluminum, without specialized coatings or treatments. These collars are economical while meeting standard requirements.
  • 5. Bulk Purchases: Buying split collars in bulk can lead to cost savings. Suppliers often offer discounts for larger quantity orders, making it a cost-effective choice for businesses with high usage.
  • 6. Off-Brand or Generic Options: Consider off-brand or generic split collars from reputable suppliers. These alternatives can be more affordable than well-known brand names while still meeting quality standards.
  • 7. Online Marketplaces: Explore online marketplaces that offer a wide range of split collars. Price comparison and user reviews can help you find affordable options that meet your specific needs.
  • 8. Local Suppliers: Check with local industrial suppliers and distributors for cost-effective split collar options. Purchasing locally may save on shipping costs and lead to better deals.
  • 9. Consider Material Substitutes: In some cases, you can use a different material or type of collar that is more budget-friendly while still meeting your application requirements. Consult with suppliers for suitable alternatives.

When selecting cost-effective split collars, it’s essential to balance budget constraints with the specific requirements of your application. While cost savings are important, ensure that the chosen collars meet safety, performance, and durability standards for your project.

shaft clamp

Where can I find reliable suppliers for high-quality split collars suitable for various applications?

Finding reliable suppliers for high-quality split collars is essential to ensure the performance and reliability of your mechanical assemblies. Here are some sources to help you locate reputable suppliers:

  • 1. Industrial Supply Companies: Established industrial supply companies often stock a wide range of mechanical components, including split collars. You can contact these companies and inquire about their product offerings and suppliers.
  • 2. Online Marketplaces: Online marketplaces like Amazon, eBay, and Alibaba have numerous sellers offering split collars. Read product descriptions, reviews, and seller ratings to make informed decisions.
  • 3. Manufacturer Websites: Visit the official websites of split collar manufacturers. Many manufacturers provide information about their products, specifications, and contact details for inquiries and purchases.
  • 4. Local Distributors: Check if there are local distributors or dealers in your area who supply mechanical components, including split collars. Working with local distributors can provide convenience and support.
  • 5. Industrial Trade Shows: Attend industrial trade shows and exhibitions related to mechanical components. These events often feature suppliers and manufacturers showcasing their products, allowing you to assess the quality of split collars in person.
  • 6. Online Industrial Directories: Online industrial directories, such as Thomasnet and GlobalSpec, can help you search for suppliers and manufacturers of split collars based on your specific requirements.
  • 7. Recommendations from Peers: Seek recommendations from colleagues, peers, or industry professionals who have experience with split collars. They can provide valuable insights into reputable suppliers.
  • 8. Industry Associations: Contact industry-specific associations related to your field. They may have lists of approved suppliers and manufacturers of mechanical components, including split collars.
  • 9. Specialty Suppliers: Some suppliers specialize in specific types of split collars or offer customized solutions. Explore specialty suppliers to find collars tailored to your unique application needs.
  • 10. Reviews and Ratings: Utilize online reviews and ratings on platforms like Trustpilot or industry forums to assess the reputation and reliability of suppliers. High ratings and positive reviews are indicators of trustworthiness.
  • 11. Request Samples: Some suppliers may offer samples or trial products to help you evaluate the quality of their split collars before making a bulk purchase.

When sourcing high-quality split collars, it’s crucial to consider factors such as material quality, precision engineering, and compliance with industry standards. Always communicate with potential suppliers to discuss your specific requirements and assess their ability to meet your needs.

China wholesaler Custom Carbon Stainless Steel Big Size Clamp Bearing Mounting Double Split Shaft Collar   brass shaft collarChina wholesaler Custom Carbon Stainless Steel Big Size Clamp Bearing Mounting Double Split Shaft Collar   brass shaft collar
editor by CX 2023-11-01

China Professional Rolling Shutter Door Stamping Flange Bearing/Roller Bearing shaft collar axial load

Product Description

1. Spring box are used for the Rolling Shutter Door, like Garage Door .

 

2. Made of general Q235 steel plate give to quality and durability.

 

3. Surface alvanized in silvery , which make the wheels perfectly resistant to fight against rust.
 

4. We also supply  hooks which used for the Spring Box

Thickness:2.5mm
Packing:50pcs/bag
Packing size:46*28*15mm

FAQ:

1. Are you a factory or trading company?
HangZhou Xihu (West Lake) Dis. Yongbida Hardware Factory is a professional manufacturer from ZheJiang province, we have high quality products of locks, spring box, door hardwares, other accessories, and so on.
 
2.Where is your factory?
Our factory is located in HangZhou, established in 1990s with 20000m2   and more than 60 employees in different departments , about 30minutes to the CBD of HangZhou and 1 hour to HangZhou Xihu (West Lake) Dis. international airport.
   
3.Can you produce the products as per customer design?
We started OEM and ODM business since 2007.  Please refer us samples or 3D drawing, we will offer the best prices for you.
   
4. How does your factory do regarding quality control?
We have staff to check every process, and each product will be inspected before packing by our QC staffs.
   
5. How about your packing?
Our products are packed with multi-packing to protect from the long-district transportation. EPE bag+ thick poly bag+ hardboard inner box +5-layer master carton.
Pallets are available if required, but the charge should be paid by you.
 
 6.How is your After-Sales service?
 Any defective products, Please send us the pictures of defective products to check. If the problem occurred by us, products can be returned, we will send you a replacement without extra fee.
 
7.May I get your sample for free to check before order?
Of course, free sample is available for checking, but you need to pay for the express cost, the delivery is about 2–4 days.
 
8.  How about your delivery day?
Usually our delivery time is about 30days after deposit.
 
9. How can I trust you in the first cooperation?
Firstly, samples can be sent to check our quality and you are welcome to visit our factory. 

10. If you have more questions,  just please contact us !

Kind: Rolling Door Accessories
Structure: Rolling Door Accessories
Open Type: Manual
Style: Modern
Usage: Rolling Doors
Material: Metal
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Shaft Collar

Different Types of Shaft Collars and How to Choose the Right One For Your Needs

A shaft collar is a simple machine component, but its role is crucial in a variety of power transmission applications. It is most commonly found in gearboxes and motors. Its simple design makes it a relatively easy component to install. In addition to being useful for bearing faces, shaft collars are also used as mechanical stops.

Single split shaft collars

Single split shaft collars are a common design choice for industrial applications. They provide easy installation and disassembly, reducing downtime and labor. Unlike traditional collars, they use full seating torque of set screws, resulting in even distribution of forces along the shaft circumference. In addition, they provide stronger holding power.
Single split shaft collars are available in a variety of sizes and materials. They are typically made of stainless steel, alloyed steel, or nylon. They are available with a black oxide finish or a smooth finish. In addition, they can be manufactured to custom sizes. The benefits of shaft collars manufactured by Power Rite are the high quality of their materials and the close tolerances of their manufacturing process.
Single split shaft collars are available in D-bore or hex bore configurations. They are designed to fit shafts with diameters from 1/4″ to 6″. Some of these types also have a proprietary black oxide finish. Single split shaft collars can be manufactured with a range of materials, including 303 stainless steel and 1215 lead-free steel. They can also be made with engineered plastic.
Single split shaft collars are an excellent choice for applications where accurate positioning is essential. These collars can be easily installed and removed without removing any of the shaft components. They feature double grub screws to help tighten the clamp around the shaft. This feature makes installation and removal easier and reduces downtime.
Single split shaft collars are also available in a lightweight style for applications where space is an issue. While these collars are ideal for light-duty applications, they are not ideal for heavy-duty environments. Single split shaft collars are generally made of a softer material, such as steel. They have high torque capacities and hold securely around a shaft. However, their high holding power and low friction means they can damage a shaft or cause indentations that make repositioning the shaft difficult.
Clamp-style shaft collars are another option for tougher installations. This type offers more clamping power than a one-piece shaft collar. They come in either a one-piece or two-piece design, and can be installed by hand.
Shaft Collar

Set screw collars

Set screw collars are used to secure shafts. They are available in a variety of sizes and materials. Available options include hex socket, cup point, and 3A thread screws. They are suitable for a variety of industries, including food, wood, and chemical. A distributor of set screw collars can custom-design them to meet the specifications of a given application.
There are many different types of shaft collars, which include socket set screw collars, 2-hole set screw collars, and metric and stainless steel collars. In addition to these, you can also find corrosion-resistant set screw collars with a black oxide finish. These collars are ideal for industrial and commercial applications and are RoHS compliant.
Set screw collars are the most cost-effective option for shaft collars. They also offer lightweight options for applications where space is at a premium. Additionally, they can be equipped with a second screw positioned at 90 degrees to provide additional load capacity. They also come with a keyway to accommodate keyed shafts. These collars provide a reliable solution for securing shafts in a variety of applications.
Compared to set screw collars, clamp-style collars are easier to install and have greater holding power. They are available in one and two-piece versions. Clamp style collars are designed to lock onto a shaft while not damaging it. In addition, they are easily removed and reinstalled. They can be used in a variety of settings, including in guiding systems and bombsights.
Set screw shaft collars are an excellent choice for applications where precision is important. They prevent shafts from moving and hold power transmission components in place. The set screw collar is set in place with a grub screw or set screw. The screw driver can adjust the set screw to achieve the desired position.

Quick-clamp shaft collars

Quick-clamp shaft collars are a simple yet effective way to secure shafts. These collars have an eccentric lever that generates a locking force on the shaft. They are easy to install and remove and are manufactured with an aluminum design. In addition, these collars have a low mass inertia value. They are available in both one-piece and two-piece styles. Both styles have outer diameter flats for mounting other components.
The Quick-clamp shaft collars are resilient and feature a flush handle. They are easy to install and adjust, eliminating the need for tools and reducing production downtime. Another feature of these collars is that they have a high-strength tension adjustment screw that ensures compatibility with a wider range of shaft tolerances. These collars also have an axial holding power adjustment screw.
CZPT manufactures two types of quick-clamp shaft collars. One type has a cam lever that sits flush with the outside diameter and is finger-actuated. The other type is a clamp-style collar with a tension-adjustment screw. This design is better suited to low-rpm applications, or for frequent changeovers.
Shaft Collar

Choosing the right shaft collar for your application

Shaft collars play a key role in many industrial applications, and choosing the correct one is critical. They need to be designed properly and have the appropriate performance characteristics to ensure safe and effective operation. In this article, we will look at the different types of shaft collars and how to choose the right one for your needs. Typically, shaft collars are made from steel or aluminum, coated with zinc or another corrosion resistant material. But they can also be made from non-metallic materials.
Shaft collars come in a variety of shapes and materials, and the right one for your application will depend on these features. The key factors to consider are the material, holding power, and surface treatment, and their alignment with your application specifications. The shaft collars that fit your application best are often highly customizable, so it is important to determine the exact specifications for your application.
Shaft collars are simple and versatile components that are used to secure bearings on a shaft. They also serve as mechanical stops and can help to align and space other components. Shaft collars are widely used in gearbox assemblies, flagpoles, medical instruments, and other applications. They are available in a wide variety of styles, and can be used for nearly any application.
The type of shaft collar you choose will depend on the application and the type of machine. A heavier duty shaft collar will provide better vibration and shock resistance. These collars are typically designed for off-road or mining applications, and can be made of heavy-duty steel. They also provide more holding power, as double-wide shaft collars can provide an additional 25% of holding power.
When choosing a shaft collar, it’s important to consider the application and the required level of maintenance. Some assemblies will only need minor adjustments, while others require frequent disassembly. A two-piece shaft collar is a better option for assemblies that will have to be removed often.
China Professional Rolling Shutter Door Stamping Flange Bearing/Roller Bearing   shaft collar axial loadChina Professional Rolling Shutter Door Stamping Flange Bearing/Roller Bearing   shaft collar axial load
editor by CX 2023-06-12

China OEM Gcr15 Bearing Steel Auto Parts 3D Printer Chrome Plated Hardness Linear Piston shaft collar aliexpress

Product Description

Product Description

Product description

Linear shaft features

Items

Linear shaft

Flexible shaft

Hollow shaft

Material

CK45, SUJ2

CK45

SUJ2

Heat treatment

Induction hardened

Not hardened

Induction hardened

Surface hardness

HRC58±2

HRC15±3

HRC60±2

Surface treated

Hard chrome plated

Hard chrome plated

Hard chrome plated

Precision

h7, g6, h6

h7, g6

h7, g6, h6

Roundness

Max3.0µm

Max3.0µm

Max3.0µm

Straightness

Max5.0µm

Max5.0µm

Max5.0µm

Chrome thickness

20-30µm

30µm

30µm

Roughness

Max1.5µm

Max1.5µm

Max1.5µm

Process machinized

Threading, reduced shaft dia,coaxial holes drilled and tapped, flats-single or multiple, key way, snap ring grooves, radial holes drilled and tapped, chamfering

Linear shaft description

ERSK Linear offers linear shafting in a variety of different options to meet a wide range of customer needs. Available in hardened steel, CK45 material steel, SUJ2 material steel, hollow steel , inch and metric, Simplicity Shafting maintains the ideal surface finish for linear plain bearings and ball bearings.

· CZPT round shafting is available in inch sizes from 3/16″ thru 4″ and metric sizes from 3 mm thru 80 mm

· Machining available CZPT request

High Reliability

ERSK linear shaft has very straight quality control standards covering every production process. With proper lubrication and use, trouble-free operation for an extended period of time is possible.

Smooth Operation

The high efficiency of linear shaft is vastly superior to conventional shaft. The torque required is less than 30%. Linear motion can be easily changed from rotary motion.

High Durability

Rigidly selected materials, intensive heat treating and processing techniques, backed by years of experience,have resulted in the most durable linear shaft manufactured.

Induction linear shaft, Flexible linear shaft,

linear bearings shaft, hollow linear shaft,

hardened linear shaft, chromed linear shaft

Application

For delicate application in industrial application, machine tool and automation application.

Linear Shafts – Technical Properties.

Test linear shaft surface roughness

the max roughness is Ra0.4um

Straight the linear shaft straightness:

We control the traighness 0.05mm of linear shaft 300mm

Test hardness:

S45C materail induction linear shaft, the hardness is HRC55-58

GCr15 (SUJ2) materail induction linear shaft, the hardness is HRC58-63

If flexible shaft, the hardness is based on the shaft material itself

Test the linear shaft dia precision, as usually, h7 is the normal tolerance in our stock, But we can offer g6, h6 precision too. if any special tolerance, we are able to customize them for you.

We can machinize all kinds of machining,

 

Related products

Related products

There are many kinds of products we can offer, If you are interested in them, please click the picture and see the details.

Production Flow

Over service

Over Service

Packaging & Shipping

Packaging and shipping

PP bag for each linear shaft, Standard exported carton outside for small order shipping by international express, such as DHL, TNT, UPS

Wooden box outside for big quantity or very long linear shaft by sea, by air

 

Company Profile

Company information

Our principle

 

Material: Gcr15
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: H7, H6, G6
Axis Shape: Straight Shaft
Shaft Shape: Real Axis
Samples:
US$ 3/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Shaft Collar

How to Choose the Right Shaft Collar

A shaft collar is a small, inexpensive machine component that serves a variety of purposes in power transmission. It is most commonly used in gearboxes and motors. It can serve as a mechanical stop, bearing face, or locating component. Its simple design makes it easy to install. Here are some of the most common types and their functions.

Function

Shaft collars are an important part of many mechanical systems. These devices hold mechanical components on a shaft and also help mount shafts on flat surfaces. They are available in many different styles, sizes, and materials. Selecting the right shaft collar is essential in preventing damage to components. Stafford Manufacturing, a leading manufacturer of shaft collars and other related mechanical components, can help you choose the right one for your application.
There are two main types of shaft collars. The first is the Heavy Duty type. It has a larger outer diameter and wider opening. While this may seem to increase holding power, the problem with that is that it can reduce the amount of space the collar has on the shaft. On the other hand, the Thin Line type is similar, but is made with smaller outer diameters. Another type is the Threaded Bore shaft collar. These shaft collars offer exceptional axial holding power, and are designed to protect threaded shafts without causing any damage.
A shaft collar has many uses and is typically used in industrial applications. It can act as a spacer and to stop shaft movement in reciprocating applications. It can also be used to align and position parts of automation machinery.

Types

There are several different types of shaft collars. These components are critical for a variety of applications, and their design plays a large role in the performance of the resulting product. To select the most appropriate collar, designers must consider several factors, including the style, material, bore size, and geometry of the shaft. Many manufacturers provide performance data, and users can contact them for assistance.
There are many different types of shaft collars, which make it important to understand how each one works and what applications they can serve. Fortunately, shaft collars are easy to install and require little maintenance. Whether you need to secure industrial railings or position medical equipment, shaft collars are a versatile component that can be tailored to meet your needs.
One type of shaft collar is the locking collar. This type of shaft collar has a threaded end that is designed to mate with spindle bearings. They offer an increased TIR than standard shaft collars and allow for precise preload control. They also feature slots for spanner wrenches.
Shaft Collar

Sizes

Shaft collars come in a variety of sizes. You can get a small diameter shaft collar for small equipment, or a large diameter shaft collar for larger equipment. Both styles are made from solid steel, and they come in several thicknesses. You can choose between one-half inch and six-inch collars, depending on your needs.
There are no specific standards for shaft collars, but most manufacturers have similar designs. They’re either single-point faced or double-split, and can be fine or coarse threaded. They’re often used as mechanical stops, bearing faces, or as locating components. Their bore is either fine or coarse, and their outside diameter and width are determined by the shaft diameter.
Shaft collars are commonly found in mechanical and automation equipment. These ring-shaped devices hold motor components, sprockets, and bearings in place. They also allow them to be adjusted and positioned precisely. A shaft collar is often used to connect the end of a shaft to a mechanical stop.
Another type of shaft collar is called a set collar. It has a recessed area for a screw to bite into a shaft. These collars are perfect for holding sprocket hubs, bearings, and spacers. They can also be used as a rigid coupling.

Cost

When choosing a shaft collar, consider its intended application and cost. Some shaft collars are very expensive while others are quite affordable. Choose one that meets the needs of your assembly. If you’re using the shaft collar infrequently, a clamp style or a set screw style may be a better choice. Then, you can easily adjust or disassemble it with just a few tools. If you’re using it more frequently, choose a two-piece shaft collar.
The material of the shaft collar is also an important consideration. Steel and stainless steel are common choices. While both materials are strong and durable, steel tends to have better holding power. However, aluminum shaft collars are lighter and provide better strength-to-weight ratio. The type of material you choose depends on the amount of corrosion protection you need, and whether you’ll need the collar to resist extreme temperatures. If the shaft collar is going to be used in a hot environment, you may want to go with a titanium collar.
There are many different sizes and types of shaft collars. The type of collar you choose depends on the specific application and the system it’ll be used in. Consider the dimensions of your shaft, the material of the shaft, and the length of the shaft to find the right fit. If you’re not sure what size you need, ask a manufacturer for help.
Shaft Collar

Placement on shaft

In some applications, the placement of the shaft collar can be critical to the overall performance of the machine. The collar’s design must take many factors into account, including material, style, bore size, and shaft geometry. If a user is uncertain of the proper placement of their collar, they should refer to the manufacturer’s website for guidance.
While shaft collars may look simple, they’re actually essential mechanical components that are used in almost every type of machinery. Despite their ubiquitous use in every industry, they are often underappreciated due to their complexity. Many people aren’t aware of their importance or the various types of collars available. This shaft collar guide will provide detailed information to help you find the right shaft collar for your specific application.
The surface treatment of the shaft collar is another important factor that contributes to its holding power. The most common treatment is a black oxide finish. This finish enhances screw torque while preserving the frictional properties of the bore. This finish can be further optimized by applying light oil to the screw. Zinc plating is also a good option for shaft collars. This material offers better corrosion resistance, but can reduce holding power.

Clamp style

A clamp style shaft collar is a simple and effective tool for securing shafts in machine tools. Its two-piece design allows for quick and easy positioning adjustments and has greater holding power than set screw collars. In addition, its friction-based connection maintains ease of use and prevents shaft damage. This type of collar is also more corrosion resistant than set screw collars.
There are several different types of shaft collars, including single and double split collars. Single-piece clamp collars are anchored into the shaft with a single tangential screw, whereas double-piece collars are anchored to the shaft with two socket cap screws. The latter type provides more stability and axial holding power and is suitable for rotating assemblies. A single or double-piece clamp collar can also be threaded to allow for precise positioning along the shaft. Its internal threads also provide enhanced support for high axial loads and act as a positive mechanical stop.
There are different types of shaft collars, each with its own set of advantages and disadvantages. A set-screw collar may be preferred over a clamp-style shaft collar, but it’s not the only choice. A set-screw collar can severely mar the shaft and can prevent fine adjustments. However, it is a good idea to use the torque wrench when tightening a shaft collar.

Zinc plated

Zinc plated shaft collars are available in a variety of sizes. They are precision machined from cold finished steel bar stock and zinc plated for corrosion resistance. They are also very attractive. They are made in the USA. Whether you need a zinc-plated shaft collar for a simple repair or a more complicated installation, Lovejoy has the right solution for your needs.
The CZPT MSP-12-FZ two-piece shaft collar has a 12mm bore, 28mm OD, and 11mm width. Its clamp style design allows you to easily install and remove the shaft collar. It is easily adjustable and is stamped with the CZPT name.
China OEM Gcr15 Bearing Steel Auto Parts 3D Printer Chrome Plated Hardness Linear Piston   shaft collar aliexpressChina OEM Gcr15 Bearing Steel Auto Parts 3D Printer Chrome Plated Hardness Linear Piston   shaft collar aliexpress
editor by CX 2023-05-29

China OEM Customized Metal Shaft Collar Shaft Locking Collars axle collar bearing

Product Description

Product Description

SET SCREW

Set screw shaft collars are the most effective when used on a shaft made of a material which is softer than the set screw. our set screw collars are finished exclusively with forged socket set screws for greater torque capacity and improved

1.materials:stainless steel,alloy steel ,aluminum ,brass etc. 
2.
Finish: Zinc plating, Nickel plating,nature
3.competitive price ,prompt delivery 
4.OEM service as your drawings
Technics
1.Milling 2.grinding 3.Turning 4.wire-cutting 5.CNC bending 6.CNC machining 7.Stamping 8.forging 9.boring 10.broaching and so on .
Accuracy
1.Milling:0.01mm 2.Turning:0.01mm 3.Grinding:0.002mm 4.Wire-cutting :0.005mm 5.CNC Machining : 0.005mm

Company Profile

RunCheng Import and Export Co., Ltd is the leading professional OEM/ODM manufactory of auto parts, hardware, graphite products, sanitary ware and mechanical items. Product ranges include CNC machining parts, casting parts, stamping parts, forged parts, turning parts, pipe fitting, rubber parts, CZPT and many more.

We ensure the highest quality by using only the highest quality raw materials and by subjecting all our products to a rigorous Quality Control System. The quality control of our large-scale production process conforms to ISO9001 standards.

We have won the trust of our clients with our top quality products and outstanding service.

Our business is built on the following 4 advantages, namely Full range of products, Top quality, Outstanding service and Reasonable price!

Contact us at once and let′ S do mutually beneficial business together!


Production ability
  

EQUIPMENT LIST

NAME

 

SPECIFICATION 

BRAND           

ORIGINAL PLACE 

QUANTITY

CNC Machines

Graph 600

KNUTH

CHINA

20

1370

KAFO

TAPAN

20

EDM Machines

ZNC450

BHangZhouNA

ZheJiang

20

ZNC430

BHangZhouNA

ZheJiang

30

Grinding Machines

ACC-350ST

BESFORD

CHINA

50

Auto Lathe Machining  

L150G-II

OKUMA

CHINA

80

Wire Cutting Machines  

DK7732

NEW FAST

CHNA

30

Milling Machine

SHCM-97A

GENTIGER

ZheJiang

20

CMM Machine          

CRT-PA574

MITUTYO

JAPAN

10

Hardness Tester

TILO-T60

MITUTYO

JAPAN

5

Productions showing:
Equipments & Working plant:
Worry about our quality problem?

We are an IATF16949:2016 Certifed supplier, strictly execute inspection on ISO quality control system. All our products will pass 10-step inspections: it starts from incoming material inspection to IPQC,  then FQC and final inspection with reports before shipment.

Packaging & Shipping

Generally carton or wooden case or plastic foam with standard export wooden pallet , or as per consumer’s requirements.
Certifications:

 

Your Satisfaction, Our Motivation!

FAQ

 

Q1. Are you factory or trading company?    

 A: We are a customized factory with independent oversea trading office .

 

Q2.Can you provide sample for us?     

 A: Yes, free sample is available

 

Q3. What raw material do you use?   

 A: Stainless Steel, Carbon Steel, Mild Steel, Galvanized Steel, Aluminum alloy, brass, copper, Aluminum etc.

 

Q4. What finishes can you provide?

 A: powder coating, polishing, zinc/nickel /chrome plating, painting, anodized, hot dip galvanized, sandblasted etc.

 

Q5. How do you ensure quality control? 

 A: We inspect every process based on your drawings or samples and also check the products before packing

 

Q6. Is small quantity available?

 A: Yes, Small quantity for trial order is available. 

  

Q7. How do you ship the goods?

A: We have our cooperation forwarder, they can deliver the goods to you in very short time with competitive price, and you can ship by your own agent as your convenience.

 

Q8. How about your delivery time ?  

 A: 3-10 days for samples and 15-45 days for mass production .

 

Q: How To Place A Order?

  * You send us drawing or sample

  * We make the sample and send it to you

  * You think the sample is good then place an order and pay us 30% deposit

  * We start to make the product

  * When the goods is done, we take photoes for your check and you then pay the balance

  * We deliver the products to courier company

Application: Auto and Motorcycle Accessory, Machinery Accessory
Standard: GB, EN, JIS Code, TEMA, ASME
Surface Treatment: Anodizing
Production Type: Mass Production
Machining Method: CNC Turning
Material: Nylon, Steel, Plastic, Alloy, Aluminum
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Shaft Collar

Shaft Collar

A shaft collar is a common machine component that provides mechanical support to shafts. It is found in motors and gearboxes and serves several important functions. Its design makes it an easy component to install. In addition to providing mechanical support to shafts, shaft collars can also serve as locating components and bearing faces.

Sizes

Shaft collars are complex components with several factors that determine their performance. Typical considerations include the style, materials used, bore size, and shaft geometry. Manufacturers typically have information on these factors on their websites. Users can also contact them for advice. These components are available in different sizes and types.
Shaft collars are available in a wide range of sizes, from 1/8 inch to six inches. They can also be re-bored if necessary. There are two main types of shaft collars. The basic one uses set screws, which may mar the shaft. The other type features a clamp screw and a hinge on one side. This eliminates the risk of losing screws.
The most common types of shaft collars are made from steel or aluminum. Plastic shaft collars are lightweight and inexpensive, but have reduced holding power. Steel shaft collars are more durable and hold their shape without bending. They also tend to be corrosion resistant. The steel grades used can have a big impact on their performance. For example, the 12L14 alloy is easier to machine, but does not do well in welding applications. Stainless steel shaft collars offer enhanced corrosion resistance, but reduced holding power. They are most commonly made from 304 stainless steel.
Shaft collars are an integral part of many mechanical systems. They are used to mount shafts onto flat surfaces and hold mechanical components in place. These accessories are available in a wide range of sizes and styles. Depending on the application, a shaft collar can be made to fit virtually any shaft.
The material used for shaft collars is also an important factor. The material of the shaft collar can make a big difference in the performance of the collar. The screw can be either flat or hex. The material will also determine the holding power. A screw with a hardened center will provide better holding power.
Another factor affecting the holding power of shaft collars is its surface treatment. The most common types are steel, black oxide, and zinc-plated. The latter is beneficial as it reduces the friction coefficient and enhances the holding power. Zinc-plated collars are better corrosion resistant than black oxide. However, the black oxide treatment is more effective because it prevents slippage.

Construction

Shaft collar construction involves the construction of a collar around an underground shaft. This structure consists of steel casing and concrete that extends below the surface of the ground. The concrete may be constructed using conventional or specialty cements. It may also contain accelerators and other additives to improve its holding strength. The concrete may also contain heavyweight or lightweight aggregates for optimal properties.
There are two main types of shaft collars. The double split collar is the most common type. It has a split design in the middle and is fastened using two allen head cap screws on each side. It has greater holding power than a solid collar, and the two-piece design makes it easier to install and replace. In addition, double split collars don’t require disassembling the entire shaft and its components.
There are many factors to consider when selecting a shaft collar. The material, holding power, and surface treatment of the shaft collar will affect its ability to withstand the load without slipping. These factors must match the specifications of the application in order to maximize its safety. A guide can help you choose the most appropriate shaft collar for your needs. The holding power of a shaft collar depends on the material used for construction and the screw size.
Shaft collars are used for a variety of applications that require a secure grip on mechanical components. They can be used on shafts, tubes, piping, and even flat surfaces. Only the highest quality collars are approved for use in industrial settings. These collars help ensure proper alignment of mechanical components and prevent any unnecessary movement. There are three different types of shaft collars. One type is a two-piece collar that is held together by two socket head screws.
Shaft collars may include an extended concrete pad at the surface. This concrete pad can support surface equipment and piping support assemblies. The shaft collar extends below temporary bracing material and within the retainment wall. The extended portion of the collar is then extended into the competent rock. From there, the collar transitions to a shaft lining assembly.
Shaft Collar

Functions

A shaft collar is a simple device that plays a critical role in a wide variety of industrial applications. Its primary functions are to hold components in place, locate components on the shaft, and form an attachment between a shaft and another component. In designing a shaft collar, a designer needs to consider several factors, including the material, bore size, and geometry of the shaft. It is also important to consider the specific requirements of the system.
Threaded collars are superior to smooth-bore collars in many ways. Threaded collars are more resistant to axial loads than smooth-bore collars, which rely on friction. Because the collar and shaft are threaded, they are practically impossible to move axially without breaking the shaft.
There are many types of shaft collars, each with their own unique properties. Each collar has different applications, and its performance must match the needs of the application. For many applications, holding power is paramount, while other performance factors include weldability, inertia, conductivity, corrosion resistance, and precision of collar-face relative to the bore.
While shaft collars may exert some holding force, they also exert other forces on the shaft. For example, they are ideal for splitting hubs, where they act as interfaces between various components. In addition, their close tolerances allow them to exert minimal force on the hub. This allows them to provide increased holding power while minimizing the force needed to close the hub.
Despite their simplicity, the shaft collar plays a crucial role in machine design. They hold components in place and provide necessary positioning for power transmission. Additionally, they are used as spacers in motor assemblies. And, they can also act as mechanical stops, limiting the movement of the shaft. You can find them in virtually any type of machinery.
Another type of shaft collar is the threaded collar, which can be axially or radially attached to the shaft. Its design has an internal thread that helps to precisely position it along the shaft. Internal threads also offer enhanced support for high axial loads. Internal threads also act as a positive mechanical stop.

Applications

Shaft collars are used in a variety of industrial applications. They serve as accurate stops and easy-to-adjust spacers. They can be used on glass, thin-wall tubing, and plastic. Other applications include optical measuring instruments and positioning systems for MRI machines. These collars are available in different sizes, materials, and styles.
The material used for shaft collars can have a significant impact on their performance. A collar’s holding power is also affected by the strength of its screw. Generally, a collar manufacturer will provide a screw that is compatible with the application. However, in some cases, it is necessary to use a nonstandard screw.
The clamp-style collar is reliable under constant loads, but it may need extra support when shock loads are present. In these situations, a small mass is impacted, and high forces are created. A positive stop can help a clamp-style collar stay in place during such shock loads. Alternatively, a collar undercut on a shaft can provide positive stops in both axial directions.
There are many different shaft collar designs and styles. Choose the right one for your application by considering your specifications. Different styles have different purposes, so consider the type and material that is right for your application. Some manufacturers offer a variety of different styles to choose from. You can visit their website or call their customer service representatives for assistance. This way, you can choose the best shaft collar for your specific needs. These collars are a very important part of many mechanical systems.
Clamp-style collars are an excellent choice when axial adjustment along the shaft is required frequently. These collars are easy to install and remove and do not mar the shaft. In addition, they provide excellent clamping force and impressive holding power. Quick-clamp collars are also a great choice for light-duty applications. They allow for fast and easy adjustment and are particularly useful in packaging and printing industries.
Shaft collars are composed of two components: a central bore and a second component. The first component is preferably made of resilient elastomeric material. The second component is made of a plastic material and has a relative stiffness that helps the shaft collar slide on a shaft without causing too much stress.
China OEM Customized Metal Shaft Collar Shaft Locking Collars   axle collar bearingChina OEM Customized Metal Shaft Collar Shaft Locking Collars   axle collar bearing
editor by CX 2023-05-23

China best Stainless Steel Shaft Mounting Collars with Set Screw Free Sample bearing shaft collar

Product Description

Product Description

SET SCREW

Set screw shaft collars are the most effective when used on a shaft made of a material which is softer than the set screw. our set screw collars are finished exclusively with forged socket set screws for greater torque capacity and improved

1.materials:stainless steel,alloy steel ,aluminum ,brass etc. 
2.
Finish: Zinc plating, Nickel plating,nature
3.competitive price ,prompt delivery 
4.OEM service as your drawings
Technics
1.Milling 2.grinding 3.Turning 4.wire-cutting 5.CNC bending 6.CNC machining 7.Stamping 8.forging 9.boring 10.broaching and so on .
Accuracy
1.Milling:0.01mm 2.Turning:0.01mm 3.Grinding:0.002mm 4.Wire-cutting :0.005mm 5.CNC Machining : 0.005mm

Company Profile

RunCheng Import and Export Co., Ltd is the leading professional OEM/ODM manufactory of auto parts, hardware, graphite products, sanitary ware and mechanical items. Product ranges include CNC machining parts, casting parts, stamping parts, forged parts, turning parts, pipe fitting, rubber parts, CZPT and many more.

We ensure the highest quality by using only the highest quality raw materials and by subjecting all our products to a rigorous Quality Control System. The quality control of our large-scale production process conforms to ISO9001 standards.

We have won the trust of our clients with our top quality products and outstanding service.

Our business is built on the following 4 advantages, namely Full range of products, Top quality, Outstanding service and Reasonable price!

Contact us at once and let′ S do mutually beneficial business together!


Production ability
  

EQUIPMENT LIST

NAME

 

SPECIFICATION 

BRAND           

ORIGINAL PLACE 

QUANTITY

CNC Machines

Graph 600

KNUTH

CHINA

20

1370

KAFO

TAPAN

20

EDM Machines

ZNC450

BHangZhouNA

ZheJiang

20

ZNC430

BHangZhouNA

ZheJiang

30

Grinding Machines

ACC-350ST

BESFORD

CHINA

50

Auto Lathe Machining  

L150G-II

OKUMA

CHINA

80

Wire Cutting Machines  

DK7732

NEW FAST

CHNA

30

Milling Machine

SHCM-97A

GENTIGER

ZheJiang

20

CMM Machine          

CRT-PA574

MITUTYO

JAPAN

10

Hardness Tester

TILO-T60

MITUTYO

JAPAN

5

Productions showing:
Equipments & Working plant:
Worry about our quality problem?

We are an IATF16949:2016 Certifed supplier, strictly execute inspection on ISO quality control system. All our products will pass 10-step inspections: it starts from incoming material inspection to IPQC,  then FQC and final inspection with reports before shipment.

Packaging & Shipping

Generally carton or wooden case or plastic foam with standard export wooden pallet , or as per consumer’s requirements.
Certifications:

 

Your Satisfaction, Our Motivation!

FAQ

 

Q1. Are you factory or trading company?    

 A: We are a customized factory with independent oversea trading office .

 

Q2.Can you provide sample for us?     

 A: Yes, free sample is available

 

Q3. What raw material do you use?   

 A: Stainless Steel, Carbon Steel, Mild Steel, Galvanized Steel, Aluminum alloy, brass, copper, Aluminum etc.

 

Q4. What finishes can you provide?

 A: powder coating, polishing, zinc/nickel /chrome plating, painting, anodized, hot dip galvanized, sandblasted etc.

 

Q5. How do you ensure quality control? 

 A: We inspect every process based on your drawings or samples and also check the products before packing

 

Q6. Is small quantity available?

 A: Yes, Small quantity for trial order is available. 

  

Q7. How do you ship the goods?

A: We have our cooperation forwarder, they can deliver the goods to you in very short time with competitive price, and you can ship by your own agent as your convenience.

 

Q8. How about your delivery time ?  

 A: 3-10 days for samples and 15-45 days for mass production .

 

Q: How To Place A Order?

  * You send us drawing or sample

  * We make the sample and send it to you

  * You think the sample is good then place an order and pay us 30% deposit

  * We start to make the product

  * When the goods is done, we take photoes for your check and you then pay the balance

  * We deliver the products to courier company

Application: Auto and Motorcycle Accessory, Machinery Accessory
Standard: GB, EN, JIS Code, TEMA, ASME
Surface Treatment: Anodizing
Production Type: Mass Production
Machining Method: CNC Turning
Material: Nylon, Steel, Plastic, Alloy, Aluminum
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Shaft Collar

Types of Shaft Collars

Quick-clamp shaft collars

Quick-clamp shaft collars are a convenient option for tightening and loosening shafts. Unlike traditional bolts, quick clamps do not require any tools to install and adjust them. These collars come with flush handles and are designed to reduce production downtime. They also feature high-strength tension adjustment screws for compatibility with a wider range of shaft tolerances.
Quick-clamp shaft collars are offered in a variety of styles. CZPT, for example, offers a unique style of quick-clamp shaft collars with an integral lever. This lever sits flush against the outside diameter and is finger actuated. In addition, this design includes a tension-adjustment screw that can be adjusted according to the application’s requirements. Another style of quick-clamp shaft collar is a one-piece clamping collar with an integrated handle. It is ideal for low-rpm applications, and is designed to be a quick and simple solution for frequent shaft changeovers.
Quick-clamp shaft collars have an adjustable locking force generated by an eccentric lever and are very easy to install. They are available in one and two-piece clamp-type styles, and come in more than thirty standard sizes. They are available with round, square, and threaded bores. Additionally, you can choose to have them painted or customized.

Single split shaft collars

Single split shaft collars are a common choice for new installations. They provide easy installation and disassembly, which helps to minimize labor and downtime. They are also designed with full seating torque of the set screws, which evenly distributes forces throughout the shaft circumference. As a result, they provide greater holding power.
These shaft collars are available in various materials. They are typically made from different types of steel, including stainless steel and aluminium steel. They can also be made from nylon. The latter is available with different finishes, including black oxide. These are also available in custom sizes. These shaft collars are made to fit specific applications.
Single split shaft collars are available in a variety of sizes to fit a wide range of shaft diameters, from 1/8″ to 4 15/16″. The material used for the shaft should be softer than the material used for the set screw. They are marked with the bore size and are available in non-plated, chrome-plated, and black oxide coated materials.
Heavy-duty shaft collars are designed to hold a large amount of torque. They are available in two-piece clamp and one-piece clamp styles and offer up to 25 percent more holding force than standard collars. They are also available in a variety of materials, including proprietary black oxide finish, 1215 lead-free steel, 303 stainless steel, and high-strength 2024 aluminum.
Single split shaft collars are generally easy to install and remove. The design of these collars allows the shaft to fit into it evenly, which improves holding power. They also eliminate the need to remove or disassemble other components of the shaft. Additionally, they are easy to adjust and can work with virtually any shaft.
Single split shaft collars come in two-piece and one-piece styles. One-piece shaft collars are simpler to install and do not damage the shaft. Clamp-style collars are easy to use and do not require tools. They are designed to be hand-adjustable. These collars are recommended for light-duty applications. They are available in a wide range of threaded bore sizes. They also come in various styles, including ring-style and set-screw collars.
Shaft Collar

Set-screw shaft collars

Set-screw shaft collars are made of different materials, including steel, aluminum, and zinc plated steel. They are available in various widths and sizes. They can be used in aerospace, defense, and construction applications. Some types are standard, while others are custom-made.
A shaft collar has three primary functions: it holds a component in place, locates the component on a shaft, and creates an attachment between the shaft and another component. The design of a shaft collar depends on several factors, including the material, diameter, and geometry of the shaft.
One of the most common uses of shaft collars is to secure bearings and sprockets to shafts. In some cases, they also act as mechanical stops. For example, a two-piece clamp collar will wrap around the shaft without leaving any marks, while a set-screw collar will lock onto a shaft with a set screw. These types of collars can be used on predrilled and soft shafts.
Another advantage of set screw shaft collars is that they can be manufactured in a lightweight style for space-constrained applications. Another benefit is their ability to hold twice as much load as standard shaft collars. These collars are also available with a keyway, which makes them suitable for shafts with a key.
Another advantage of set-screw shaft collars is their safety. They were invented in the recessed socket screw industry and have become an industry standard. They prevent the shaft from sliding and causing a flanged bearing to come out. They are easy to install and remove, and they are ideal for light-duty applications.
Clamp style shaft collars are also available in one-piece and two-piece designs. This type of collar is unique in that it can be removed without damaging the shaft. They are also adjustable and can fit virtually any shaft. Their clamping force is evenly distributed around the shaft, so they are significantly safer than set screw collars, which use point-contact clamps.
Shaft Collar

Hinge shaft collars

The International series is a two-piece shaft collar with metric outer diameters, metric widths, and inch bores. These collars are suitable for many different types of applications, and are available in a variety of materials and bore sizes. They are available in 1215 lead-free steel with black oxide finish, high strength 2024 aluminum, and 303 stainless steel.
Custom Hinged Shaft Collars are a great choice for applications requiring quick and easy adjustment, especially in remote locations. They are available in a variety of materials, including steel, stainless steel, aluminum, and brass. You can even get custom-made collars for unusually shaped shafts.
Hinge shaft collars are similar to two-piece shaft collars in many ways. They allow easy disassembly and reassembly along the shaft and are usually the preferred choice in harsh environments. Hinge shaft collars have a simple design, allowing them to be installed quickly and easily. They also provide superior holding power. If you’re considering a hinge shaft collar for your application, it is important to consider how it will be used.
Hinge shaft collars serve as precise stops and spacers for different laboratory equipment. They can also be used on plastic, glass, and thin-walled tubes. They are often used in medical equipment, where the need for accuracy is paramount. They also serve as guides in optical measuring instruments. They are also useful in trucks and off-road vehicles, where they serve as mechanical stops.
Hinge shaft collars can be purchased in two-piece or one-piece designs. They can be adjusted using a single screw or lever. They can be installed and removed without causing any damage to the shaft. Unlike set screw collars, they don’t require tools. This makes them ideal for applications where access to the shaft is difficult or impossible. The advantages of these collars include improved safety and security.
China best Stainless Steel Shaft Mounting Collars with Set Screw Free Sample   bearing shaft collarChina best Stainless Steel Shaft Mounting Collars with Set Screw Free Sample   bearing shaft collar
editor by CX 2023-05-22

China factory CNC Machining Stainless Steel Water Pump Bearing Shaft expanding shaft collar

Product Description

Densen Customized CNC machining stainless steel water pump bearing shaft  

Product Description

Customized Style

 1. Valve parts

 2. Medical equipment parts

 3. Mechanical equipment parts
 4. Automotive parts

 5. Welded parts combination reprocessing

Material

 Copper, aluminum, steel, stainless steel and other 

 non-ferrous metals nylon, PU and other plastic.

Size  φ0.5-φ500mm   1-1000mm long    Or Customized
Surface Treatment

 1. Hard chromium plating

 2. Decorative chromium plating
 3. Zinc plating, gold plating, silver plating

 4. Passivation 

 5. Anodizing

 6. Hard oxidation
 7. Pickling phosphating

Heat Treatment Mode

 Carburizing, nitriding, quenching and tempering

 

 

Company Information

Founded in 2002, our factory is a non-governmental enterprise producing mental parts and components.

Now we have over 50 technical workers and over 80 sets of machining equipment such as manual lathes, NC lathes, digital display milling machines, screw rolling machines and centreless grinding machines. Our technological and production capacity has reached the advanced level at home.

Our products have passed evaluation of ISO9001:2000 international quality management system certification. Our main products are parts and components of pneumatic valves, air cylinders, special valves, hardware, automotive, machinery and electric appliances. Especially our parts for pneumatic valves and air cylinders have been all exported to the EU, winning unanimous praise among customers.Since our establishment, our factory has always pursued continuous innovation and followed the operation philosophy of “Zhicheng Precision, Pursues Precision”, joining hands with both domestic and overseas friends. As a rising bright pearl in the Chinese mechanical industry, we are forging ahead toward the grand goal.
  

Quality Assurance   ISO9001:2000 Certified
Machining Equipment   5 Axis Machining Center/ Composite Numerical
  Control Lathe/Machining Center / CNC Lathes / 
  Surface Form Grinders /Cylindrical Bore Grinders
  / Milling Machines / Lathes / Sawing Machines /
  Wire-cuts / Laser Cuts / CNC Shearing Machines
  / CNC Bending Machines  etc.
Materials   Aluminum Alloy:
  5052 /6061/ 6063 / 2017 / 7075 / etc.
  Brass Alloy:
  3602 / 2604 / H59 / H62 / etc.
  Stainless Steel Alloy:
  303 / 304 / 316 / 412 / etc.
  Steel Alloy:
  Carbon Steel / Die Steel / etc.
  Other Special Materials:
  Lucite / Nylon / Bakelite / POM / PP / PE / PC / Titanium / ABS etc.
  We handle many other type of materials. 
  Please contact us if your required material is not listed above.
Surface Treatment

  Blacking,polishing,anodize,chrome plating,

  zinc plating,nickel plating,tinting

Inspection   Coordinate Measuring Machine(mitutoyo) / 
  tool microscope(mitutoyo) / digimatic micrometer
  /inside micrometer / Dial Indicator / go-no go gauge
  / dialgage / electronic digital display caliper/
  automatic height gauge / precision level 2 detector
  / precision block gauge / Hardness Tester / ring gauge etc.
File Formats  Solid Works,Pro/Engineer, AutoCAD(DXF,DWG), PDF,TIF IGS , STP etc.

Processing support

Casting Service:

Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. 

 New Densen offers multiple investment casting, sand casting, permanent casting, die casting, low pressure casting, ESR casting, lost foam casting, etc. Material can be handled include steel, iron, non-ferrous. Single component weight range is from 0.01Kg to 150 tons separately. 

 Forging Service:

Forging is a manufacturing process involving the shaping of metal using localized compressive forces. New CZPT offers open die forging, closed die forging and ring forging services. Material can be steel, iron and non-ferrous. Material can be handled include steel, iron, non-ferrous. Single component weight range is from 0.1Kg to 50,000Kgs.

Stamping Service:

Stamping (also known as punching) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape.

 New Densen-XBL has more than 60 sets stamping equipments, is the designed supplier for several famous bands automotive companies, has the full ability to offer whole processes from blanking, stamping, welding, to electrostatic spraying for CZPT customers.

Welding & Fabrication Service: 

Welding Frabrication is the fabrication process of metal structures by cutting, bending, then assembling the components together through welding 

 New CZPT offers manual arc welding ,laser welding and robot welding etc. UT, MPT,RT,PT all are available used for inspection, WPS &PQR (Welding Process Specification& Procedure Qualification Records) before production is available under clients’ requirement.  

 Machining Service: 

Machining is any of various processes in which a piece of raw material is cut into a desired final shape and size by a controlled material-removal process. 

New Densen-XBL has more than 60 sets precision machines incl. CNC center, boring, milling, lathing, etc., and more than 300 inspection instruments incl. 3 sets CMM with grade μm. Repeated tolerance can be maintained as 0.02mm. Meanwhile awarded by certificates ISO9001-2008; ISO/TS16949. New Densen-XBL specialized in high precise machining for small-middle-big metal components. 

 

3rd Party Inspection:

New Densen worked as 3rd party inspection center besides its sister factories or sub-contractors’ self inspection, Offers process inspection, random inspection and before delivedry inspection services for material, mechanical, inside defects, dimentional, pressure, load, balance, surface treatment,  visual inspection and test. Weekly project follow-up report together with pictures and videos, full quality inspection documentation available. 

New CZPT also designed as 3rd party inspection representative for several customers when their products made by other suppliers. 

Contact us and Application

 

Application: Fastener, Auto and Motorcycle Accessory, Hardware Tool, Machinery Accessory, Fastener, Auto and Motorcycle Accessory, Hardware Tool, Machinery Accessory, Fastener, Auto and Motorcycle Accessory, Hardware Tool, Machinery Accessory
Standard: GB, GB
Surface Treatment: Polishing, Polishing
Production Type: Mass Production, Mass Production
Machining Method: CNC Machining, CNC Machining
Material: Steel, Plastic, Brass, Alloy, Copper, Aluminum, Iron, Steel, Plastic, Brass, Alloy, Copper, Aluminum, Iron, Steel, Brass, Alloy, Copper, Aluminum, Iron
Customization:
Available

|

Customized Request

Shaft Collar

What Is a Shaft Collar?

A shaft collar is a simple machine component, but its function is important in many power transmission applications. Most commonly, shaft collars are used in motors and gearboxes. They can act as locating components, bearing faces, and mechanical stops. Their compact design makes them easy to install. In addition, they provide a clean, simple look for your gearbox or motor.

Sizes

There are a variety of sizes of shaft collars. Each type has different parameters and requirements. These specifications can be found on the manufacturer’s website. These dimensions are important for the selection process. In order to determine which size is best for your needs, first identify the system parameters and limitations that you’ll be using.
Shaft collars are available in a variety of sizes and materials. These pieces can range in thickness from just a few millimeters to several inches. A solid steel shaft collar is usually available from 1/8″ to six inches. The material used for shaft collars is either 304 stainless steel or lead-free steel.
The oldest style of shaft collar is the set collar, which uses a hardened set screw to penetrate the shaft surface. It is ideal for holding bearings, spacers, and sprocket hubs. These collars are typically installed using hex keys, which are six-sided L-shaped tools, also known as Allen Wrenches. These collars are useful for many different machine applications, and are often used in conjunction with springs and dampers to hold components in place. They are also useful as mechanical stops, stroke limiters, and bearing holders.
Shaft collars come in one-piece and two-piece designs. A one-piece collar provides uniform holding force on the shaft, whereas a two-piece shaft collar is stronger and can be assembled anywhere on the shaft. Shaft collars are generally available in English and metric units, and the manufacturer can alter the dimensions of any standard collar to meet your needs. For more unique situations, you can also choose a fully customized shaft collar that is specific to your application.

Functions

A shaft collar is a metal or plastic device used to locate and position components on a shaft. It also limits the movement of the shaft. These devices can be found on a wide variety of applications, including motor assembly components. There are many types of shaft collars. To help you find the right shaft collar for your application, you can use Thomas Supplier Discovery Platform. The platform has over 70,000 product categories to help you find the right solution.
Clamp-type collars are reliable under constant loads, but may require additional support under shock loads. A shock load is a force generated by a relatively small mass that is rapidly increased by impact. Clamp-style collars are designed to counteract this force, and an undercut on the shaft may help them stay firmly in place. Clamp-style collars are also available in two-piece designs, which offer a high holding force and ease of assembly.
A shaft collar is an important machine component. It holds and positions sprockets on a shaft. It also acts as a mechanical stop, and helps prevent a shaft from slipping. They can also be used to limit the movement of cylinders and actuators. These simple components are found in virtually every type of machinery.
The torque-generating force in a set-screw shaft collar is absorbed by friction between the threads and the clamp body. The friction between these parts helps compensate for the lost torsioning effort, which can lead to the collar failing to hold. Alternatively, a torque wrench can help control the final torque of the shaft collar.

Types

There are many different types of shaft collars available for different applications. It is important to understand the characteristics of each to find the right one for your application. The most common shaft collars are made from steel or aluminum, but some are also made of plastic. These are relatively inexpensive and lightweight, but their holding power is limited. Titanium shaft collars are much lighter than aluminum and are resistant to extreme temperatures, but they are only used in a few specific applications.
Another type is a clamp collar, which is mounted using a compression method. Compared to the set screw type, clamp collars are much stronger and have a higher holding power. Clamp collars come in either a one-piece or two-piece design. One-piece collars are used in applications where the shaft is split and requires a positive stop.
The strength of a shaft collar depends on the type of screw used to attach it to the shaft. The screw’s strength and diameter will affect the holding power of the shaft collar. In most cases, a manufacturer will offer the proper screw with the collar. In some cases, however, a non-standard screw may be more appropriate.
The set screw collar is one of the oldest types. Its disadvantage is that it can be difficult to move and may damage the shaft. Also, it is not as secure as a clamp-based collar. In addition, two-piece hinged shaft collars are the most convenient. One-piece collars are difficult to move, while two-piece collars can be moved easily along the shaft without separating components.
Shaft Collar

Dimensions

Shaft collars are a complex component and their dimensions are crucial to the performance of the application. Designing a shaft collar requires consideration of a variety of factors, such as the type of material, bore size and geometry of the shaft. The manufacturer of a shaft collar will usually publish performance data on its website, or users can contact them for assistance.
The material used in shaft collars has a significant impact on the collar’s strength and its holding capacity. Shaft collars should be made from a high-quality, corrosion-resistant material. The strength of the screw also plays an important role in the collar’s holding capacity. Generally, a collar’s manufacturer will provide the appropriate type of screw for the application. However, in some cases, a non-standard screw may be necessary.
Shaft collars are available in a variety of styles. One-piece collars are often used in applications where there is minimal or no disassembly or adjustment required. Alternatively, two-piece collars may be used when frequent disassembly is needed. Regardless of the style, the size of shaft collars should be consistent with the requirements of the assembly.
Shaft collars are made from steel or aluminum. They offer good holding power and are lightweight. Steel shaft collars are durable and have good corrosion resistance. However, the grade of steel can affect their performance. Stainless steel collars are easier to machine and have improved corrosion resistance. However, they may reduce the holding power.

Stainless steel

A stainless steel shaft collar is a simple mechanical component used to secure a shaft. It is used for many different applications, most commonly in motors and gearboxes. They also function as locating components, mechanical stops, and bearing faces. These collars are available in different sizes and can be used for a variety of different purposes.
Shaft collars come in various materials, including stainless steel, aluminum, and polyamide. They are available with a variety of different finishes, including electroless nickel plating. Stainless steel shaft collars are available in various diameters, including 5/16 in. through 5/8 in. They are also available in single and double split styles.
CZPT offers a full line of stainless steel shaft collars in both 303 and 316 stainless steel. These collars are resistant to corrosion caused by water and a wide variety of commercial-grade cleaning agents. They are also supplied with fastening hardware of similar material. For added durability, CZPT shaft collars are also available in engineered plastic.
Stainless steel shaft collars can be easily adjusted for the proper torque. They come in various sizes and are easy to install and remove. They can also be re-bored if necessary. One type of shaft collar is quick-clamp, which is equipped with a clamping lever and a handle. It’s ideal for frequent setup and adjustment.
Shaft Collar

Quick-clamp shaft collars

Quick-clamp shaft collars are a simple and convenient way to secure a shaft. They have a flush handle that sits flush with the outside diameter of the shaft and can be easily adjusted by hand. They are made from lightweight aluminum and stainless steel hardware that does not mar the shaft.
These shaft collars replace standard hardware and are easy to install and remove. Quick-clamp shaft collars are available in one, two, and three-piece clamping styles. Some quick-clamp shaft collars have an integrated hinge and countersunk mounting holes for easy mounting. They can also have a knurled nut for easier locating.
Quick-clamp shaft collars are a convenient option for many types of packaging machinery. They can be installed and adjusted with no tools, making them an efficient choice for frequent changeovers and setups. CZPT offers two types of quick-clamp shaft collars. The first type has a cam lever that sits flush with the outside diameter and is finger operated. The second type has an adjustable tension-adjustment screw for easy adjustment. Both designs are ideal for low-rpm applications where frequent changeovers are needed.
Quick-clamp shaft collars are made of black anodized aluminum and steel fasteners. These shaft collars are available in sizes ranging from 0-300mm and in various designs. A quick-clamp shaft collar has a high load-bearing capacity, and a high torque capacity. Axial load capacities and torque specifications are non-binding guidance values and do not represent a warranty or guarantee of their characteristics.
China factory CNC Machining Stainless Steel Water Pump Bearing Shaft   expanding shaft collarChina factory CNC Machining Stainless Steel Water Pump Bearing Shaft   expanding shaft collar
editor by CX 2023-05-19

China Good quality 6CT Engine Rod Bearing Engine Crankshaft Bearing Main Bearing d bore shaft collar

Product Description

       Jingbang manufactures shaft collars in multiple styles to fit shafts ranging from 1/8″ to 6″ and 3mm to 150mm. They are made from select qualified bar stock in 303 & 316 stainless steel, black oxide and zinc plated carbon steel, high-strength aluminum, and engineered plastic. Our shaft collars have precisely controlled face to bore perpendicularity (identified by the grooved face) TIR ≤ .002″ (.05mm) with tighter tolerances on bearing locknuts. Perpendicularity is critical for alignment when a shaft collar is used as a load-bearing face, mechanical stop, or for mounting components. And we can also engrave the LOGO according to customer requirements

 

Product Name rod bearing
Size 1/8″ to 6″ and 3mm to 150mm. or non-standard according to your requirements.
Accept Material AISI 303/304/316L, SUS 303/304/316, Aluminum 6061/6063/7075/2571, Brass/Bronze, Titanium etc.

Accept 

Finish

Machining, Plain, Polishing, Zinc- Plated, Black Oxide, Anodizing, Passivation, Galvanized nickel-alloy plated, Powder Coating, etc, as per your requirements.
Type One-piece, Two-piece, Threaded, Shaft coupling, Heavy-duty, Mountable, Quick Clamping, Hex& D- Bore, Set screw
Standard Metric, imperial
Packing Service We generally packing fasteners to prevent them from colliding with each other during transportation to produce scratches and surface plating, also accept customization.
Sample Service Free samples will be sent to you after confirming the order, and we will charge a sample fee for some products with high value.

CUSTOM DESIGNS

As a service to our customers, we offer our vast manufacturing experience and talents to meet special needs with custom parts. Our in-house engineering team has extensive experience designing and custom engineering solutions to meet your requirements. If you do not see what you are looking for in our standard line, please inquire about custom options.

 

Materials & Finishs

 

Packaging & Shipping

We can also purchase and complete packaging according to customer requirements, such as blister boxes, rustproof paper, pearl cotton packaging, and we promise not to make a penny on extra packaging.

Production Process

 

Our Advantages

Company Profile

FAQ

1, How to ensure that every process’s quality?
Every process will be checked by our quality inspection department which insures every product’s quality. In the production of products, we will personally go to the factory to check the quality of products.
2, How long is your delivery time?
For products we have stock, within 15 days; If customized, according to your quantity, about 20-25days.
3, What is your payment method?
Paypal, Alibaba, 30% value of T/T in advance and other 70% balance before shipping. For small order less than1000USD, would suggest you pay 100% in advance to reduce the bank charges.
4, Can you provide a sample?
Sure, for stocked products, we will provide free samples and you will be charged for shipping. 

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

Standard Or Nonstandard: Nonstandard
Shaft Hole: Customized
Torque: 70-80N.M
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

Shaft Collar

Types of Shaft Collars

Clamp style shaft collars

A variety of styles of shaft collars are available for your machining needs. Clamp style shaft collars offer better flexibility and hold better than set screw collars. They are best for shaft materials that are softer than a setscrew. Clamp style collars are generally easier to maneuver, as they are two-piece and are hinged along the shaft.
Clamp style shaft collars come in two-piece and one-piece designs. One-piece clamp collars are typically used for a single-piece shaft, while two-piece clamp collars are used for multiple shafts. The one-piece clamp collar provides a more uniform holding force, while two-piece clamp collars provide more clamping force and can be installed anywhere on the shaft. Both styles are available in English and metric measurements.
The holding power of Clamp style shaft collars depends on their bore size and concentricity. The fastening hardware also affects torque transmission. Forged screws are generally stronger than broached screws, and are less likely to ream out. However, you still need to make sure that the material of the collar is strong enough to withstand the recommended screw torque.
Clamp style shaft collars are available in 1215 lead-free steel with a black oxide finish and zinc plating, as well as 303 and 316 stainless steel. They are also available in 2024 aluminum with an anodized finish. They are available in a range of sizes from 1/8” to six inches and 3mm to 150mm.
One of the main benefits of Clamp style shaft collars is their versatility. The collars can be used as guides, spacers, or stops on a variety of medical equipment. They are designed to distribute compression forces around a shaft, and they can be added at any stage in the manufacturing process.

Set screw shaft collars

Set screw shaft collars are used to secure screws to shafts. They can be purchased in a variety of sizes. The external diameter, internal diameter, and width of the collar will determine the proper collar size. Some companies also offer custom and adjustable-width collars. Clamp-style shaft collars are easier to maintain, and distribute torque evenly across the shaft. They also offer twice the holding power of set screw collars.
Collars are available in metric and inch sizes. They are also available in zinc plated and black-oxide steel. In addition, they come in a variety of styles. Whether you’re looking for a custom collar, or something a little more conventional, you can find it with the help of an ISO-certified supplier.
Set screw shaft collars come in different sizes and materials. Socket collars, for example, are made of steel and have an inside diameter of 5/64″ to 1-1/8″. In addition, forged socket set screw shaft collars come in 3/16 to 4 in. They are also available with special hardware for connection to shafts.
Set screw shaft collars are commonly used on transmission and machinery. A set screw allows you to secure the collar in position by setting it into the correct position with a grub screw or a set screw. The set screw can then be adjusted with a screw driver and is a quick and easy solution for keeping a shaft in place.
Shaft Collar

Aluminum shaft collars

Aluminum shaft collars offer a number of advantages, ranging from their light weight to their corrosion resistance. Aluminum shaft collars are available in various styles and sizes, and can be plated with a variety of finishes. They are also available in lightweight styles for applications with tight space constraints. The most important factor when selecting a shaft collar is the material used to make it. Aluminum is lighter than steel and has a high strength to weight ratio. The choice of material should also depend on how much corrosion resistance is required. For example, if the shaft will be exposed to extreme environments, it is a better choice to use treated steel.
Another benefit to aluminum shaft collars is their ability to be custom-matched to the shaft. This feature helps to increase their aesthetics and branding potential. In addition, the ability to color-code components and switches can improve safety. This is especially useful in fail-safe applications. By incorporating color-coded collars, manufacturers can increase the safety of their products.
Another advantage of aluminum shaft collars is their strength. For instance, they can withstand higher torque levels than other types of shaft collars. They can be easily adjusted, and their two-piece design makes them easy to replace. Moreover, CZPT keeps the two-piece collars together during manufacturing, ensuring a perfect fit for the shaft. These collars also feature forged steel socket screws for enhanced holding power and torque capacity.
Single-piece shaft collars are also available in various styles. The set screw type has a perpendicular outer face. The set screw in these collars is used to engage the mating shaft. This type of shaft collar is a good choice for rotating assemblies.
Shaft Collar

Stainless steel shaft collars

The main function of a stainless steel shaft collar is to provide clamping force to a rotating shaft. This is achieved by a variety of methods. One of these is by bending or hammering. A shaft collar can also be made of aluminum or a combination of both. These options provide different advantages, which are described in this article.
Stainless steel shaft collars are available in different sizes, shapes, and materials. The diameter of the shaft collar may range from five-sixteenths to two-and-a-half inches. Some manufacturers produce the collars in different materials, including T304, T316, 416, and 17-4PH. Their products may also come in various shapes, such as angles, flats, structural shapes, and threaded rods.
One of the most important advantages of a stainless steel shaft collar is its strength and durability. A well-made collar can prevent wear and tear and provide excellent holding power. It also has many applications and is useful in many industries. Its application ranges from vertical conveyors to horizontal athletic equipment machinery, from agriculture to retail.
While there are numerous types of shaft collars, all three types have some common characteristics. Typically, steel shaft collars have high holding power and slim to average profiles. Heavy-duty collars have twice the holding power of low-profile collars and are used in heavy-duty construction and mining. Ultra Heavy-Duty shaft collars have the highest axial holding power and are made of steel. Shaft collars may be treated with zinc for corrosion resistance.
One manufacturer offers stainless steel shaft collars made of 303 stainless steel and other materials. It offers collars of various diameters from three-eighth to one-eighth inch. They are available in threaded, mounting, and heavy-duty styles, and are suitable for a wide range of applications, including the aerospace, energy, and medical industries.
China Good quality 6CT Engine Rod Bearing Engine Crankshaft Bearing Main Bearing   d bore shaft collarChina Good quality 6CT Engine Rod Bearing Engine Crankshaft Bearing Main Bearing   d bore shaft collar
editor by CX 2023-05-18