Product Description
Stainless Steel Shaft Collar With Set Screw
high precision shaft collars / plastic shaft collars / nylon shaft collars / stainless steel shaft collars / Set Screw Shaft Collars / Custom Set Screw Shaft Collars / Shaft locking Collars / Shaft mounting collars are the most effective when used on a shaft made of a material which is softer than the set screw.
Collar Material: Plastic (nylon), Steel, Stainless Steel, Brass, Aluminum, etc
Collar Finish: Zinc, Nickel, Black, Plain, etc
Collar Inner Diameter: Custom
Collar Outer Diameter: Custom
Collar Width: Custom
Screw Length: Custom
Screw Material: Steel
Screw Size: Custom
Screw Type: Socket Set Screw
Type: Solid Clamping Collar
Notes:Zinc Plated Steel Set Screw Collar. Traditional cost effective collar design
Application: | Fastener, Auto and Motorcycle Accessory, Hardware Tool, Machinery Accessory |
---|---|
Standard: | GB |
Surface Treatment: | Polishing |
Production Type: | Mass Production |
Machining Method: | CNC Machining |
Material: | Nylon, Steel, Plastic, Alloy, Aluminum, Iron |
Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
---|
Can you offer insights into retrofitting machinery with split collars for enhanced flexibility?
Retrofitting machinery with split collars can indeed enhance flexibility and versatility in your mechanical systems. Here are some insights into the process:
- 1. Easy Adjustability: One of the key advantages of split collars is their ease of adjustment. When retrofitting machinery, you can replace traditional collars with split collars to make fine adjustments to the position of components on the shaft quickly.
- 2. Reduced Downtime: Split collars simplify the installation and adjustment process. This can significantly reduce downtime during maintenance and reconfiguration of machinery, enhancing overall operational efficiency.
- 3. Compatibility with Existing Shafts: Split collars are designed to fit a range of shaft sizes. When retrofitting, you can often use the same shafts and simply replace the existing collars with split collars, eliminating the need for extensive modifications.
- 4. Modular Design: By using split collars, you can create a modular design for your machinery. This allows for easier customization and adaptation to changing requirements without major overhauls.
- 5. Quick Component Replacement: In cases where components like pulleys, sprockets, or gears need replacement, split collars simplify the process. You can swap out components without disassembling the entire system.
- 6. Precision Positioning: Split collars provide precise positioning on the shaft. This is valuable when retrofitting machinery for tasks that demand accuracy, such as CNC machining or robotics.
- 7. Space Efficiency: Split collars have a compact design, making them suitable for machinery with limited space. This is especially beneficial when you need to optimize the use of available area.
- 8. Variety of Materials: Split collars are available in various materials, including steel, aluminum, stainless steel, and plastic. You can choose materials that align with your specific retrofitting needs, such as corrosion resistance or weight considerations.
- 9. Weight Savings: In industries like aerospace and automotive, where weight is a critical factor, retrofitting with lightweight split collars can result in significant weight savings without sacrificing performance.
- 10. Industry-Specific Solutions: Many suppliers offer industry-specific split collar solutions. When retrofitting machinery for applications like food processing, medical devices, or aerospace, you can find collars designed to meet industry standards and regulations.
When retrofitting machinery with split collars, it’s essential to carefully plan the process, ensure compatibility with existing components, and consider the specific advantages they offer for your application. This approach can lead to improved flexibility, reduced maintenance time, and enhanced adaptability in your machinery.
Can you provide recommendations for cost-effective split collars catering to different budget constraints?
Cost-effective split collars are available to cater to various budget constraints. Here are some recommendations based on different budget levels:
- 1. Economy Split Collars: For tight budgets, consider economy split collars made from materials like steel or zinc-plated steel. These collars are cost-effective and provide reliable performance for many applications.
- 2. Plastic Split Collars: Plastic split collars, such as those made from nylon or acetal, are often affordable and suitable for budget-conscious projects. They are lightweight and corrosion-resistant.
- 3. Single-Split Collars: Single-split collars are generally more budget-friendly than double-split or triple-split versions. While they provide effective shaft clamping, they may have slightly lower holding power.
- 4. Basic Materials: Opt for split collars made from basic materials, such as steel or aluminum, without specialized coatings or treatments. These collars are economical while meeting standard requirements.
- 5. Bulk Purchases: Buying split collars in bulk can lead to cost savings. Suppliers often offer discounts for larger quantity orders, making it a cost-effective choice for businesses with high usage.
- 6. Off-Brand or Generic Options: Consider off-brand or generic split collars from reputable suppliers. These alternatives can be more affordable than well-known brand names while still meeting quality standards.
- 7. Online Marketplaces: Explore online marketplaces that offer a wide range of split collars. Price comparison and user reviews can help you find affordable options that meet your specific needs.
- 8. Local Suppliers: Check with local industrial suppliers and distributors for cost-effective split collar options. Purchasing locally may save on shipping costs and lead to better deals.
- 9. Consider Material Substitutes: In some cases, you can use a different material or type of collar that is more budget-friendly while still meeting your application requirements. Consult with suppliers for suitable alternatives.
When selecting cost-effective split collars, it’s essential to balance budget constraints with the specific requirements of your application. While cost savings are important, ensure that the chosen collars meet safety, performance, and durability standards for your project.
What factors should I consider when choosing a split collar for a specific shaft size?
Choosing the right split collar for a specific shaft size is crucial to ensure a secure and reliable connection. Several factors should be considered during the selection process:
- 1. Shaft Diameter: Measure the diameter of the shaft accurately. The inner diameter of the split collar should match the shaft size precisely to ensure a proper fit and grip.
- 2. Collar Material: Select a collar made from a material suitable for your application. Common materials include steel, aluminum, and stainless steel. Consider factors such as strength, corrosion resistance, and environmental compatibility.
- 3. Shaft Material: The material of the shaft is important, as it affects compatibility with the collar material. Ensure that the collar material is compatible with the shaft material to prevent galvanic corrosion or excessive wear.
- 4. Environmental Conditions: Consider the operating environment. If the application is exposed to moisture, chemicals, or extreme temperatures, choose a collar with the appropriate corrosion resistance and environmental seals if necessary.
- 5. Load and Torque: Determine the load and torque requirements of your application. Select a split collar that can handle the expected forces without deforming or slipping on the shaft.
- 6. Collar Type: Choose the appropriate collar type, such as a single-split or double-split collar, based on your application’s requirements. Double-split collars provide greater holding power but may require more space on the shaft.
- 7. Locking Mechanism: Different split collars use various locking mechanisms, including set screws, clamping screws, or levers. Consider the ease of installation and removal, and the effectiveness of the locking mechanism for your application.
- 8. Space Limitations: Evaluate the available space on the shaft. Ensure that the split collar can be installed without interference from adjacent components or other collars on the same shaft.
- 9. Reusability: Determine if the split collar needs to be reusable. Some collars can be removed and reinstalled multiple times, while others may be designed for permanent installations.
- 10. Precision Requirements: For applications requiring precise positioning, choose a split collar with tight tolerances and accurate machining to ensure proper alignment of components.
- 11. Special Features: Some split collars offer additional features, such as vibration damping, environmental sealing, or keyways. Assess whether these features are necessary for your application.
- 12. Budget Constraints: Consider your budget and the cost of the split collar. While quality is essential, it’s important to find a balance between performance and cost-effectiveness.
By taking these factors into account, you can make an informed decision when choosing a split collar that suits your specific shaft size and application requirements.
editor by CX 2023-11-20
China Best Sales Double Split Collar / Two-Piece Shaft Collar for Gearbox Mechanical Stops balanced shaft collar
Product Description
Double Split Collar / Two-Piece Shaft Collar for Gearbox Mechanical Stop
Product Name | Shaft collar |
Material | stainless steel, C45 |
Weight | 13-620g |
Bore | 1/2 in- 5 1/4 in |
Item | hub and plate |
Type | Set Screw/ single split / double split |
packing | plastic bag +paper box +wooden box +wooden pallet |
1. Engineering: machine tools, foundry equipments, conveyors, compressors, painting systems, etc.
2. Pharmaceuticals& Food Processing: pulp mill blowers, conveyor in warehouse, agitators, grain, boiler, bakery machine, labeling machine, robots, etc.
3. Agriculture Industries: cultivator, rice winnower tractor, harvester, rice planter, farm equipment, etc.
4. Texitile Mills: looms, spinning, wrappers, high-speed auto looms, processing machine, twister, carding machine, ruler calendar machine, high speed winder, etc.
5. Printing Machinery: newspaper press, rotary machine, screen printer machine, linotype machine offset printer, etc.
6. Paper Industries: chipper roll grinder, cut off saw, edgers, flotation cell and chips saws, etc.
7. Building Construction Machinery: buffers, elevator floor polisher mixing machine, vibrator, hoists, crusher, etc.
8. Office Equipments: typewriter, plotters, camera, money drive, money sorting machine, data storage equipment, etc.
9. Glass and Plastic Industries: conveyor, carton sealers, grinders, creeper paper manufacturing machine, lintec backing, etc.
10. Home Appliances: vacuum cleaner, laundry machine, icecream machine, sewing machine, kitchen equipments, etc.
We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit.To supply customers excellent quality products with good price and punctual delivery time is our responsibility.
Standard Or Nonstandard: | Standard & Custom |
---|---|
Shaft Hole: | Standard & Nonstandard |
Bore Diameter: | 8-65 |
Material: | Steel/Aluminum/Stainless Steel |
Type: | Collar |
Service: | Standard and Custom |
Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Are there tutorials available on selecting the right split collar based on environmental conditions?
Yes, you can find tutorials and educational resources on selecting the right split collar based on environmental conditions. Choosing the appropriate split collar is crucial to ensure optimal performance in different environments. Here’s where to find tutorials and guidance:
- 1. Manufacturer Websites: Many split collar manufacturers provide resources on their websites, including selection guides. These guides often consider factors like temperature, humidity, and chemical exposure to help you choose the right collar for your specific environment.
- 2. Online Engineering Communities: Engineering forums and communities frequently discuss the selection of components, including split collars. You can ask questions and gather insights from experienced engineers regarding environmental considerations.
- 3. YouTube and Video Platforms: Video tutorials on platforms like YouTube can provide visual guidance on selecting split collars for specific environmental conditions. These videos may include real-world examples and case studies.
- 4. Technical Manuals and Guides: Manufacturers often include detailed technical manuals and guides with their products. These documents can provide in-depth information on selecting split collars based on environmental factors.
- 5. Industry Associations: Industry-specific associations and organizations may offer resources and publications that address the selection of components like split collars for particular environments, such as aerospace, marine, or food processing.
- 6. Online Retailers: Some online retailers provide selection tools and guidelines to help customers choose the right split collar based on environmental conditions. These tools often include filter options for material and environment type.
- 7. Engineering Schools and Institutions: Educational institutions may offer courses or seminars that cover component selection, including split collars, for various environments. Check with local universities or technical schools for educational resources.
- 8. Supplier Consultation: Contacting split collar suppliers directly can be a valuable resource. They can provide expert advice and recommendations based on your specific application and environmental challenges.
- 9. Online Articles and Blogs: Technical websites and engineering blogs may feature articles that discuss the selection of split collars in different environments. These articles often provide practical insights and tips.
- 10. Webinars and Seminars: Look for webinars and seminars conducted by industry experts and suppliers. These events may cover the selection process and considerations for split collars in varying environmental conditions.
When selecting split collars based on environmental conditions, consider factors such as temperature, moisture, chemicals, abrasion, and exposure to corrosive elements. It’s essential to choose collars that are compatible with the specific challenges your machinery or equipment will face in its operating environment.
What are the design considerations when utilizing split collars in machinery?
When using split collars in machinery, several design considerations are essential to ensure optimal performance and reliability. Here are key design considerations:
- 1. Shaft Material and Diameter: Select split collars compatible with the material and diameter of the shaft. Ensure a proper fit and consider any tolerances required for the application.
- 2. Collar Material: Choose the appropriate collar material based on factors such as corrosion resistance, temperature tolerance, and environmental conditions. Common materials include steel, aluminum, plastic, and stainless steel.
- 3. Collar Type: Determine whether a single-split, double-split, or triple-split collar is required based on the application’s holding power and torque requirements.
- 4. Fastening Method: Consider the fastening method, whether it’s set screws, clamping levers, or other mechanisms. Select the method that provides the necessary grip and ease of adjustment for your machinery.
- 5. Load and Torque: Calculate the anticipated loads and torque that the collar will need to withstand. Ensure the selected collar is rated to handle these forces without slippage or deformation.
- 6. Alignment and Precision: Proper alignment of split collars is crucial for accurate positioning of components on the shaft. Misalignment can result in uneven pressure and reduced performance.
- 7. Space Constraints: Assess space limitations and choose a split collar design that fits within the available space without interference with other components or machinery elements.
- 8. Environmental Conditions: Consider the operating environment, including temperature extremes, moisture, chemicals, and potential contaminants. Select collars with suitable coatings or materials to resist environmental factors.
- 9. Maintenance Access: Ensure that split collars can be easily accessed for maintenance and adjustments. Quick installation and removal are beneficial for reducing downtime during servicing.
- 10. Reusability: Determine whether the collars need to be reusable for frequent adjustments or if they are for one-time use. Reusable collars are designed for multiple installations and removals.
- 11. Industry Standards: Check if there are specific industry standards or regulations that apply to your machinery. Ensure that the chosen split collars meet these standards for safety and compliance.
- 12. Material Compatibility: Verify that the material of the split collar is compatible with the components it will contact on the shaft. Avoid materials that may cause galvanic corrosion or chemical reactions.
By carefully considering these design factors, you can select the right split collars for your machinery, ensuring they provide secure, precise, and reliable performance in your specific application.
Are there customer reviews available for popular brands of split collars to gauge user satisfaction?
Yes, customer reviews are valuable resources to gauge user satisfaction and learn about the performance of popular brands of split collars. Here’s where you can find customer reviews:
- 1. Online Retailers: Many online retailers, such as Amazon, provide customer reviews and ratings for split collars. You can read feedback from buyers who have purchased and used the products.
- 2. Manufacturer Websites: Some manufacturers feature customer testimonials and reviews on their official websites. These reviews often highlight the strengths and advantages of their split collar products.
- 3. Industrial and Mechanical Forums: Online forums and communities dedicated to mechanical components and engineering may have discussions and reviews about split collars. You can find insights and experiences shared by professionals and enthusiasts.
- 4. Industry-Specific Websites: Websites and platforms dedicated to specific industries, such as manufacturing or agriculture, may include user reviews of mechanical components, including split collars.
- 5. Social Media Groups: Explore social media groups and pages related to mechanical engineering, industrial equipment, or specific applications. Members may share their experiences and reviews of split collars they have used.
- 6. Industrial Directories: Some industrial directories and catalogs include user-generated reviews and ratings for mechanical components. You can search for split collar reviews in these directories.
- 7. Online Marketplaces: Besides purchasing, online marketplaces like Amazon and eBay often host customer reviews and ratings for split collars, providing insights into user satisfaction.
- 8. Word of Mouth: Network with colleagues and peers in your industry who may have experience with split collars. They can provide recommendations and share their satisfaction with specific brands.
- 9. Mechanical Engineering Blogs: Some mechanical engineering blogs and websites may publish reviews and articles about various mechanical components, including split collars. These articles may include user experiences.
- 10. Ask for Recommendations: Don’t hesitate to ask for recommendations and reviews from suppliers or manufacturers. They can share information about customer feedback and experiences with their products.
When reading customer reviews, pay attention to the overall rating, specific pros and cons mentioned, and any comments related to the application or use of the split collars. This information can help you make an informed decision and select the right brand and product for your needs.
editor by CX 2023-11-16
China high quality Td025m-09t 49173-02401 Turbocharger for CZPT Starex CZPT double split shaft collar
Product Description
TD571M-09T Turbo 49173-57101 for CZPT Starex Kia
Refone Product
Part Number 49173-57101
OE Number , 28231-27000, 28200-4A201
Applications
Hyundai Santa Fe CRDi with D4EA Engine
Hyundai Elantra with D4EA Engine
Hyundai Tarajet with D4EA Engine
Refone Factory
Packaging and Shipping
Refone Introduction
Refone is an outstanding corporation manufacturing and selling all kinds of high quality turbochargers and auto spare parts, such as Shaft&wheel, Compressor wheel, Cartridge(CHRA), Repair kits, Thrust collar&spacer, Journal bearing, Thrust bearing,Compressor housing, Bearing housing, Turbine housing, Back plate, Heat shield, Actuator, Gaskets, Oil pipe, Water pipe and so on.
Refone products cover all popular makes and applications of turbs and turbo parts, originally manufactured by Garrett, KKK, IHI, MITSUBISHI, Toyota, Schwitzer, Holset, and Hitachi. Applications cover cars such as Toyota, BMW, Renault, Audi, Ford, FIAT, Opel, Volvo, Chrysler, Caterpillar, Cummins, Detroit, Navistar, Saab, Mercedes, Volkswagen, Peugeot and Nissan. CZPT products have been exported to America, Latin America, Japan, Europe, Australia and Southeast Asia.
We are looking CZPT to building long-term business relationship with much more global friends.
Type: | ETS Exhaust-Gas-Turbo-Super-Charger |
---|---|
Body Material: | Iron |
Certification: | TS16949, ISO9001, CE |
Application: | Hyundai |
Brand: | MITSUBISHI |
Turbo Model: | Td025m-09t-3.3 |
Customization: |
Available
| Customized Request |
---|
Shaft Collar
A shaft collar is a common machine component that provides mechanical support to shafts. It is found in motors and gearboxes and serves several important functions. Its design makes it an easy component to install. In addition to providing mechanical support to shafts, shaft collars can also serve as locating components and bearing faces.
Sizes
Shaft collars are complex components with several factors that determine their performance. Typical considerations include the style, materials used, bore size, and shaft geometry. Manufacturers typically have information on these factors on their websites. Users can also contact them for advice. These components are available in different sizes and types.
Shaft collars are available in a wide range of sizes, from 1/8 inch to six inches. They can also be re-bored if necessary. There are two main types of shaft collars. The basic one uses set screws, which may mar the shaft. The other type features a clamp screw and a hinge on one side. This eliminates the risk of losing screws.
The most common types of shaft collars are made from steel or aluminum. Plastic shaft collars are lightweight and inexpensive, but have reduced holding power. Steel shaft collars are more durable and hold their shape without bending. They also tend to be corrosion resistant. The steel grades used can have a big impact on their performance. For example, the 12L14 alloy is easier to machine, but does not do well in welding applications. Stainless steel shaft collars offer enhanced corrosion resistance, but reduced holding power. They are most commonly made from 304 stainless steel.
Shaft collars are an integral part of many mechanical systems. They are used to mount shafts onto flat surfaces and hold mechanical components in place. These accessories are available in a wide range of sizes and styles. Depending on the application, a shaft collar can be made to fit virtually any shaft.
The material used for shaft collars is also an important factor. The material of the shaft collar can make a big difference in the performance of the collar. The screw can be either flat or hex. The material will also determine the holding power. A screw with a hardened center will provide better holding power.
Another factor affecting the holding power of shaft collars is its surface treatment. The most common types are steel, black oxide, and zinc-plated. The latter is beneficial as it reduces the friction coefficient and enhances the holding power. Zinc-plated collars are better corrosion resistant than black oxide. However, the black oxide treatment is more effective because it prevents slippage.
Construction
Shaft collar construction involves the construction of a collar around an underground shaft. This structure consists of steel casing and concrete that extends below the surface of the ground. The concrete may be constructed using conventional or specialty cements. It may also contain accelerators and other additives to improve its holding strength. The concrete may also contain heavyweight or lightweight aggregates for optimal properties.
There are two main types of shaft collars. The double split collar is the most common type. It has a split design in the middle and is fastened using two allen head cap screws on each side. It has greater holding power than a solid collar, and the two-piece design makes it easier to install and replace. In addition, double split collars don’t require disassembling the entire shaft and its components.
There are many factors to consider when selecting a shaft collar. The material, holding power, and surface treatment of the shaft collar will affect its ability to withstand the load without slipping. These factors must match the specifications of the application in order to maximize its safety. A guide can help you choose the most appropriate shaft collar for your needs. The holding power of a shaft collar depends on the material used for construction and the screw size.
Shaft collars are used for a variety of applications that require a secure grip on mechanical components. They can be used on shafts, tubes, piping, and even flat surfaces. Only the highest quality collars are approved for use in industrial settings. These collars help ensure proper alignment of mechanical components and prevent any unnecessary movement. There are three different types of shaft collars. One type is a two-piece collar that is held together by two socket head screws.
Shaft collars may include an extended concrete pad at the surface. This concrete pad can support surface equipment and piping support assemblies. The shaft collar extends below temporary bracing material and within the retainment wall. The extended portion of the collar is then extended into the competent rock. From there, the collar transitions to a shaft lining assembly.
Functions
A shaft collar is a simple device that plays a critical role in a wide variety of industrial applications. Its primary functions are to hold components in place, locate components on the shaft, and form an attachment between a shaft and another component. In designing a shaft collar, a designer needs to consider several factors, including the material, bore size, and geometry of the shaft. It is also important to consider the specific requirements of the system.
Threaded collars are superior to smooth-bore collars in many ways. Threaded collars are more resistant to axial loads than smooth-bore collars, which rely on friction. Because the collar and shaft are threaded, they are practically impossible to move axially without breaking the shaft.
There are many types of shaft collars, each with their own unique properties. Each collar has different applications, and its performance must match the needs of the application. For many applications, holding power is paramount, while other performance factors include weldability, inertia, conductivity, corrosion resistance, and precision of collar-face relative to the bore.
While shaft collars may exert some holding force, they also exert other forces on the shaft. For example, they are ideal for splitting hubs, where they act as interfaces between various components. In addition, their close tolerances allow them to exert minimal force on the hub. This allows them to provide increased holding power while minimizing the force needed to close the hub.
Despite their simplicity, the shaft collar plays a crucial role in machine design. They hold components in place and provide necessary positioning for power transmission. Additionally, they are used as spacers in motor assemblies. And, they can also act as mechanical stops, limiting the movement of the shaft. You can find them in virtually any type of machinery.
Another type of shaft collar is the threaded collar, which can be axially or radially attached to the shaft. Its design has an internal thread that helps to precisely position it along the shaft. Internal threads also offer enhanced support for high axial loads. Internal threads also act as a positive mechanical stop.
Applications
Shaft collars are used in a variety of industrial applications. They serve as accurate stops and easy-to-adjust spacers. They can be used on glass, thin-wall tubing, and plastic. Other applications include optical measuring instruments and positioning systems for MRI machines. These collars are available in different sizes, materials, and styles.
The material used for shaft collars can have a significant impact on their performance. A collar’s holding power is also affected by the strength of its screw. Generally, a collar manufacturer will provide a screw that is compatible with the application. However, in some cases, it is necessary to use a nonstandard screw.
The clamp-style collar is reliable under constant loads, but it may need extra support when shock loads are present. In these situations, a small mass is impacted, and high forces are created. A positive stop can help a clamp-style collar stay in place during such shock loads. Alternatively, a collar undercut on a shaft can provide positive stops in both axial directions.
There are many different shaft collar designs and styles. Choose the right one for your application by considering your specifications. Different styles have different purposes, so consider the type and material that is right for your application. Some manufacturers offer a variety of different styles to choose from. You can visit their website or call their customer service representatives for assistance. This way, you can choose the best shaft collar for your specific needs. These collars are a very important part of many mechanical systems.
Clamp-style collars are an excellent choice when axial adjustment along the shaft is required frequently. These collars are easy to install and remove and do not mar the shaft. In addition, they provide excellent clamping force and impressive holding power. Quick-clamp collars are also a great choice for light-duty applications. They allow for fast and easy adjustment and are particularly useful in packaging and printing industries.
Shaft collars are composed of two components: a central bore and a second component. The first component is preferably made of resilient elastomeric material. The second component is made of a plastic material and has a relative stiffness that helps the shaft collar slide on a shaft without causing too much stress.
editor by CX 2023-11-12
China supplier 40mm to 100mm 1/4 to 4 Inch Set Screw Double Split Shaft Clamp Collar for Bearing Mounting browning shaft collar
Product Description
Certification | ISO9001:2018;SGS;TS16949 |
Quality |
CNC machine, CNC Turning, CNC Milling, CNC center machine, auto lathe machine, Wire-cutting Machine CNC punching machines, CNC bending machines CNT stamping machine, CNC/auto lathe machine, Drilling machine, Hydraulic machine, Riveting machine, Tapping machine, welding machine, Film attaching machine, etc. |
Materials |
Aluminum, Steel, SPCC, SGCC,SECC, SPTE, Stainless steel, Brass, Copper, Bronze, ABS, PC, PO, POM, Nylon, etc. |
Surface finish |
Anodized, Oxide, Plating, Brushing, Polishing, Blackened, Powder coating, Sandblasting, Laser engraving Zn-plating, Ni-plating, Cr-plating, Tin-plating, copper-plating, the wreath oxygen resin spraying, the heat disposing, hot-dip galvanizing, black oxide coating, painting, powdering, color zinc-plated, blue-black zinc-plated, rust preventive oil, titanium alloy galvanized, silver plating, plastic, electroplating, anodizing, etc |
Inspection Equipment |
CMM, Projection, Calipers, Micro caliper, Thread Micro caliper, Pin gauge, Caliper gauge, Pass meter, Pass meter, etc. |
Drawing formation | PDF, CAD/DWG/DXF, IGS/STP etc. |
HangZhou CZPT Industrial Co., Ltd. is a comprehensive factory that specialized in fasteners, CNC parts, stamping parts, machinery parts, and so on. Since the establishment of the company, we have passed ISO9001: 2018, SGS, TS16949.
Our factory covers an area of 5,000 square CZPT and has 58 employees, including 5 R & D personnel and 5 quality inspection personnel.
Major areas of service include automotive, bicycle and motorcycle, industrial automation, agricultural equipment, digital electronics, medical equipment, and so on.
Looking CZPT to your cooperation.
1. We have Specialized QC testers to check the products quality according to customers’ needs.
2. We have IQC to check the dimensions and surface of the incoming material.
3. We have PQC to inspect full-course during the processing.
4. We have FQC to inspect all the plating products from outsides and make the 100% inspection before the shipments.
FAQ:
Q1: Why choose ZheJiang n?
To provide our customers with first-class services in the supply of quality screws minimizing costs.
Q2: How is quality ensured?
All our processes strictly adhere to ISO9001:2018 procedures. We have strict quality control from producing to delivery. Our company had strong technology support, 80% of our colleagues are master or bachelor’s degree. We have cultivated a group of managers who are familiar with product quality , good at modern concept of management.
Q3: Can You Strictly Follow The Tolerance on The Drawing And Meet The High Precision?
Yes, we can, we can provide high precision parts and make the parts as your drawing.
Q4: How should I order and make payment?
By T/T, for samples 100% with the order; for production, 30% paid for deposit by T/T before production arrangement, the balance to be paid before shipment. negotiation accepted.
Q5: What’s your Delivery Time?
Standard parts: 7-20days
Non-standard parts: 15-25days
We will make the delivery as soon as possible with the guarantee quality
Q6:How to Custom-made (OEM/ODM)?
If you have a new product drawing or a sample, please send to us, and we can custom-made the as your required. We will also provide our professional advices of the products to make the design to be more realized & maximize the performance.
Q7:Which mode of transport would be better?
In general, the product are heavy, we advice to make delivery by sea, Also we respect your views of other transportation as well.
Standard Or Nonstandard: | Standard |
---|---|
Shaft Hole: | 8-24 |
Torque: | >80N.M |
Bore Diameter: | 19mm |
Speed: | 8000r/M |
Structure: | Rigid |
Samples: |
US$ 20/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
What are the temperature resistance properties of split collars?
The temperature resistance properties of split collars vary depending on the material they are made from. Here’s a general overview of temperature resistance for common split collar materials:
- 1. Steel Split Collars: Steel split collars can generally withstand a wide range of temperatures. Standard steel split collars are suitable for temperatures from -40°C to 250°C (-40°F to 482°F). For higher-temperature applications, heat-resistant steel alloys may be used.
- 2. Aluminum Split Collars: Aluminum split collars have a temperature resistance range of approximately -40°C to 150°C (-40°F to 302°F). They are lighter than steel but may not be suitable for extremely high-temperature environments.
- 3. Stainless Steel Split Collars: Stainless steel split collars are highly corrosion-resistant and can endure a wide temperature range. They are suitable for temperatures from -100°C to 300°C (-148°F to 572°F) and often used in harsh environments.
- 4. Plastic Split Collars: The temperature resistance of plastic split collars varies with the type of plastic. Common plastics like nylon and acetal have a range of -40°C to 80°C (-40°F to 176°F). Some specialty plastics offer higher temperature resistance, up to 150°C (302°F).
- 5. Industry-Specific Materials: In some industries, specialty materials with enhanced temperature resistance are used. For example, aerospace applications may require split collars made from materials capable of withstanding extreme temperature fluctuations encountered during flight.
- 6. Coatings and Treatments: In addition to the base material, coatings and treatments can improve the temperature resistance of split collars. For example, heat-resistant coatings can extend the upper temperature limit.
It’s important to consult the manufacturer’s specifications for specific split collar products to determine their exact temperature resistance properties. When selecting split collars for applications in extreme temperature conditions, consider not only the collar material but also factors like the duration of exposure and the presence of additional heat-resistant treatments.
Where can I purchase split collars with specific certifications for certain industries?
Purchasing split collars with specific certifications for particular industries is crucial to meet safety and regulatory requirements. Here are some sources where you can find certified split collars:
- 1. Industrial Suppliers: Many industrial suppliers and distributors offer a range of certified split collars designed for specific industries. These suppliers often have a variety of certifications to meet regulatory standards.
- 2. Manufacturer Websites: The official websites of split collar manufacturers typically provide information on certified products. You can directly contact manufacturers to inquire about certifications and place orders.
- 3. Specialized Industrial Stores: Some specialized industrial stores focus on specific industries, such as aerospace or medical. These stores are likely to carry certified split collars tailored to those industries.
- 4. Trade Shows and Exhibitions: Attending industry-specific trade shows and exhibitions can connect you with manufacturers and suppliers who specialize in certified components, including split collars.
- 5. Online Marketplaces: Online marketplaces often list split collars with detailed product information, including certifications. You can filter search results to find collars that meet your industry’s requirements.
- 6. Industry Associations: Industry associations related to your specific field may provide recommendations or directories of certified suppliers. These associations often collaborate with trusted suppliers.
- 7. Local Distributors: Check with local distributors who may have knowledge of suppliers offering certified split collars for your industry. Local sources can be convenient for quick procurement.
- 8. B2B (Business-to-Business) Platforms: Some B2B platforms cater to industrial and manufacturing needs, offering a wide range of certified components, including split collars.
- 9. Custom Manufacturing: In cases where standard certified collars are not readily available, consider working with manufacturers who offer custom fabrication services to meet industry-specific requirements.
When purchasing certified split collars, ensure that you request and verify the relevant certifications, such as quality management certifications (e.g., ISO 9001) or industry-specific certifications (e.g., aerospace or medical certifications). It’s essential to adhere to industry standards and regulations for safety and compliance in your applications.
What factors should I consider when choosing a split collar for a specific shaft size?
Choosing the right split collar for a specific shaft size is crucial to ensure a secure and reliable connection. Several factors should be considered during the selection process:
- 1. Shaft Diameter: Measure the diameter of the shaft accurately. The inner diameter of the split collar should match the shaft size precisely to ensure a proper fit and grip.
- 2. Collar Material: Select a collar made from a material suitable for your application. Common materials include steel, aluminum, and stainless steel. Consider factors such as strength, corrosion resistance, and environmental compatibility.
- 3. Shaft Material: The material of the shaft is important, as it affects compatibility with the collar material. Ensure that the collar material is compatible with the shaft material to prevent galvanic corrosion or excessive wear.
- 4. Environmental Conditions: Consider the operating environment. If the application is exposed to moisture, chemicals, or extreme temperatures, choose a collar with the appropriate corrosion resistance and environmental seals if necessary.
- 5. Load and Torque: Determine the load and torque requirements of your application. Select a split collar that can handle the expected forces without deforming or slipping on the shaft.
- 6. Collar Type: Choose the appropriate collar type, such as a single-split or double-split collar, based on your application’s requirements. Double-split collars provide greater holding power but may require more space on the shaft.
- 7. Locking Mechanism: Different split collars use various locking mechanisms, including set screws, clamping screws, or levers. Consider the ease of installation and removal, and the effectiveness of the locking mechanism for your application.
- 8. Space Limitations: Evaluate the available space on the shaft. Ensure that the split collar can be installed without interference from adjacent components or other collars on the same shaft.
- 9. Reusability: Determine if the split collar needs to be reusable. Some collars can be removed and reinstalled multiple times, while others may be designed for permanent installations.
- 10. Precision Requirements: For applications requiring precise positioning, choose a split collar with tight tolerances and accurate machining to ensure proper alignment of components.
- 11. Special Features: Some split collars offer additional features, such as vibration damping, environmental sealing, or keyways. Assess whether these features are necessary for your application.
- 12. Budget Constraints: Consider your budget and the cost of the split collar. While quality is essential, it’s important to find a balance between performance and cost-effectiveness.
By taking these factors into account, you can make an informed decision when choosing a split collar that suits your specific shaft size and application requirements.
editor by CX 2023-11-08
China Hot selling Aluminum Spacers with Set Screw Double Single Split Clamping Threaded Shaft Collar shaft collar clamp force
Product Description
Aluminum Spacers With Set Screw Double Single Split Clamping Threaded Shaft Collar
1. Basic Information for cnc machine/lathe/milled/drilling parts:
Product Name |
Aluminum Spacers With Set Screw Double Single Split Clamping Threaded Shaft Collar |
Trade Terms | EXW,FOB,CIF,CFR etc |
Origin Country |
ZheJiang ,China |
Tolerance |
0.02mm-0.2mm |
Lead Time | Sample: within 10 days. Mass Production: within 20-25 days after receiving the deposit |
Package | *a. pp bags + carton + pallet *b. according to customers’ requirements *c. negotiable |
Payment Terms | *T/T : 30% beforehand, balanced 70% before shipping *paypal *Alibaba payment |
Service |
Punctual delivery |
2. Technical specifications of auto lathe&cnc lathe machining part:
Item |
Stainless Steel Face Mount Shaft Collars CNC Metal Collars |
Material |
Aluminum/Stainless steel/Steel/Cooper/Brass/Bronze/ ABS/PC, PO/POM/Nylon/PEEK/PPS… |
Surface finish |
Anodized, Oxide, Plating, Brushing, Polishing, Blackened, Powder coating, Sandblasting, Laser engraving etc. |
Machining |
From simple 2-axis turning to 7-axis, turn-mill-drill CNC Swiss-type machines, we are equipped with a full line of CNC equipment from the following manufactures: |
Inspection Equipment |
CMM, Projection, Calipers, Micro caliper, Thread Micro caliper, Pin gauge, Caliper gauge, Pass meter, Pass meter etc. |
Format |
PDF, DWG/DXF, IGS/STP etc |
Certification |
ISO9001,TS16949, ROHS,HE,CMRT, |
3. Similar Products:
4. Company Profile
5. Our Department/Machine
6. Measuring Tools
7. Our Certification
8.Packaging & Shipping
9. Our Client
10. Recommend Products / Other Products
11. FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: In 15-25 days after get the deposit (including tooling making time).
Q: What is your terms of payment ?
A: 1. T/T: 30% Deposit,70% left amount before shipment
2. L/C; irrevocable 100% L/C at sight.
Q: How to order:
A: * You send us drawing or sample
* We carry through project assessment
* We give you a design
* You think the design is ok
* We make the sample and send it to you
* You think the sample is good then place an order and pay us 30% deposit
* We start to make the product
* When the goods is done, we deliver it to Shengzhen Yiantian
* You pay us the balance after you see the B/L Copy
Condition: | New |
---|---|
Certification: | RoHS, ISO9001, Ts16949 |
Standard: | DIN, ASTM, GB, ANSI |
Customized: | Customized |
Material: | Stainless Steel |
Application: | Metal Cutting Machine, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal Engraving Machinery |
Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
What are the best practices for maintaining split collars in corrosive environments?
Maintaining split collars in corrosive environments is essential to ensure their longevity and optimal performance. Here are best practices for maintaining split collars in such conditions:
- 1. Material Selection: Choose split collars made from corrosion-resistant materials. Stainless steel or plastic collars are often suitable for corrosive environments due to their resistance to rust and corrosion.
- 2. Regular Inspection: Conduct routine inspections to check for signs of corrosion or wear on the split collars. Early detection of issues allows for timely maintenance.
- 3. Lubrication: Apply a suitable lubricant to the collar’s interior surface and the shaft. Lubrication can help reduce friction and prevent corrosion. Choose a lubricant compatible with the collar material and the environmental conditions.
- 4. Gasket Seals: In highly corrosive environments, consider using split collars with gasket seals. These seals provide an additional layer of protection against moisture and corrosive agents.
- 5. Protective Coatings: Some split collars can be coated with corrosion-resistant materials or coatings. These coatings enhance their resistance to corrosive elements.
- 6. Regular Cleaning: Clean the split collars and the surrounding components regularly to remove any accumulated corrosive substances, dirt, or debris. Use appropriate cleaning agents that won’t harm the collar material.
- 7. Tightening Checks: Periodically check the tightness of split collars to ensure they remain secure on the shaft. Corrosion can weaken the grip over time, so re-tighten as necessary.
- 8. Environmental Sealing: If possible, create an environmental barrier or enclosure around the machinery or equipment to minimize exposure to corrosive elements. This can help extend the life of split collars.
- 9. Replacement of Damaged Collars: If a split collar shows significant signs of corrosion or wear, consider replacing it with a new one. Regularly replace any gasket seals if they deteriorate.
- 10. Training and Education: Ensure that maintenance personnel are trained and educated on the best practices for maintaining split collars in corrosive environments. Knowledge of proper maintenance procedures is crucial.
By following these best practices, you can prolong the life of split collars in corrosive environments and maintain the reliability of your machinery or equipment. It’s important to adapt maintenance routines based on the specific environmental challenges your machinery faces.
What are the design considerations when utilizing split collars in machinery?
When using split collars in machinery, several design considerations are essential to ensure optimal performance and reliability. Here are key design considerations:
- 1. Shaft Material and Diameter: Select split collars compatible with the material and diameter of the shaft. Ensure a proper fit and consider any tolerances required for the application.
- 2. Collar Material: Choose the appropriate collar material based on factors such as corrosion resistance, temperature tolerance, and environmental conditions. Common materials include steel, aluminum, plastic, and stainless steel.
- 3. Collar Type: Determine whether a single-split, double-split, or triple-split collar is required based on the application’s holding power and torque requirements.
- 4. Fastening Method: Consider the fastening method, whether it’s set screws, clamping levers, or other mechanisms. Select the method that provides the necessary grip and ease of adjustment for your machinery.
- 5. Load and Torque: Calculate the anticipated loads and torque that the collar will need to withstand. Ensure the selected collar is rated to handle these forces without slippage or deformation.
- 6. Alignment and Precision: Proper alignment of split collars is crucial for accurate positioning of components on the shaft. Misalignment can result in uneven pressure and reduced performance.
- 7. Space Constraints: Assess space limitations and choose a split collar design that fits within the available space without interference with other components or machinery elements.
- 8. Environmental Conditions: Consider the operating environment, including temperature extremes, moisture, chemicals, and potential contaminants. Select collars with suitable coatings or materials to resist environmental factors.
- 9. Maintenance Access: Ensure that split collars can be easily accessed for maintenance and adjustments. Quick installation and removal are beneficial for reducing downtime during servicing.
- 10. Reusability: Determine whether the collars need to be reusable for frequent adjustments or if they are for one-time use. Reusable collars are designed for multiple installations and removals.
- 11. Industry Standards: Check if there are specific industry standards or regulations that apply to your machinery. Ensure that the chosen split collars meet these standards for safety and compliance.
- 12. Material Compatibility: Verify that the material of the split collar is compatible with the components it will contact on the shaft. Avoid materials that may cause galvanic corrosion or chemical reactions.
By carefully considering these design factors, you can select the right split collars for your machinery, ensuring they provide secure, precise, and reliable performance in your specific application.
Are there customer reviews available for popular brands of split collars to gauge user satisfaction?
Yes, customer reviews are valuable resources to gauge user satisfaction and learn about the performance of popular brands of split collars. Here’s where you can find customer reviews:
- 1. Online Retailers: Many online retailers, such as Amazon, provide customer reviews and ratings for split collars. You can read feedback from buyers who have purchased and used the products.
- 2. Manufacturer Websites: Some manufacturers feature customer testimonials and reviews on their official websites. These reviews often highlight the strengths and advantages of their split collar products.
- 3. Industrial and Mechanical Forums: Online forums and communities dedicated to mechanical components and engineering may have discussions and reviews about split collars. You can find insights and experiences shared by professionals and enthusiasts.
- 4. Industry-Specific Websites: Websites and platforms dedicated to specific industries, such as manufacturing or agriculture, may include user reviews of mechanical components, including split collars.
- 5. Social Media Groups: Explore social media groups and pages related to mechanical engineering, industrial equipment, or specific applications. Members may share their experiences and reviews of split collars they have used.
- 6. Industrial Directories: Some industrial directories and catalogs include user-generated reviews and ratings for mechanical components. You can search for split collar reviews in these directories.
- 7. Online Marketplaces: Besides purchasing, online marketplaces like Amazon and eBay often host customer reviews and ratings for split collars, providing insights into user satisfaction.
- 8. Word of Mouth: Network with colleagues and peers in your industry who may have experience with split collars. They can provide recommendations and share their satisfaction with specific brands.
- 9. Mechanical Engineering Blogs: Some mechanical engineering blogs and websites may publish reviews and articles about various mechanical components, including split collars. These articles may include user experiences.
- 10. Ask for Recommendations: Don’t hesitate to ask for recommendations and reviews from suppliers or manufacturers. They can share information about customer feedback and experiences with their products.
When reading customer reviews, pay attention to the overall rating, specific pros and cons mentioned, and any comments related to the application or use of the split collars. This information can help you make an informed decision and select the right brand and product for your needs.
editor by CX 2023-11-07
China Hot selling Wholesale High Precision Black Oxide Steel Two-Piece Clamp Style Hex Bore Double Split Shaft Collars shaft collar aluminium
Product Description
Wholesale High Precision Black Oxide Steel Two-Piece Clamp Style Hex Bore Double Split Shaft Collar
Product Features:
1.Effective on hard and soft shafts
2.Cost effective collar design
3.Easily installed where major disassembly would otherwise be required Simply slide these collars onto a shaft and tighten the set screw to hold the collar in place.Collas are easy to adjust with their set screws.
Types of shaft collars:
Solid Setscrew shaft collar,Hex bore shaft collar,One Piece shaft collar,Two
Piece shaft collar,Threaded shaft collar,Single split shaft collar,Double split shaft collar
Our products can be made according to Climax,Holo-Krome,Stafford,Ruland etc.
Note of single split shaft collar:
1.Material:AL,Steel,Stainless steel,Alloy,Copper,Plastic
2.Finish: Black oxide, self-color, oiled, zinc plated
3.Processes:Broaching/ Hobbing/ Slotting/tapping
4.Package:box/carton/wooden case
5.Lead time:20-35 days
6.ISO9001:2008 Certificated
Datasheet
Model | Bore Size | O.D. | Width | Screw | Approx.Weight |
(g) | |||||
I1P-12 | 1/8 | 11/16 | 5/16 | 4-40×3/8 | 14.4 |
I1P-18 | 3/16 | 11/16 | 5/16 | 4-40×3/8 | 13.8 |
I1P-25 | 1/4 | 11/16 | 5/16 | 4-40×3/8 | 12.9 |
I1P-31 | 5/16 | 11/16 | 5/16 | 4-40×3/8 | 11.8 |
I1P-37 | 3/8 | 7/8 | 3/8 | 6-32×3/8 | 23.7 |
I1P-43 | 7/16 | 15/16 | 3/8 | 6-32×3/8 | 26 |
I1P-50 | 1/2 | 1 1/8 | 13/32 | 8-32×1/2 | 41.7 |
I1P-56 | 9/16 | 1 5/16 | 7/16 | 10-32 ×1/2 | 62.2 |
I1P-62 | 5/8 | 1 5/16 | 7/16 | 10-32 ×1/2 | 58.9 |
I1P-68 | 11/16 | 1 1/2 | 1/2 | 10-32 ×1/2 | 89.8 |
I1P-75 | 3/4 | 1 1/2 | 1/2 | 1/4-28 ×5/8 | 85.2 |
I1P-81 | 13/16 | 1 5/8 | 1/2 | 1/4-28 ×5/8 | 100 |
I1P-87 | 7/8 | 1 5/8 | 1/2 | 1/4-28 ×5/8 | 94.7 |
I1P-93 | 15/16 | 1 3/4 | 1/2 | 1/4-28 ×5/8 | 110.3 |
I1P-100 | 1 | 1 3/4 | 1/2 | 1/4-28 ×5/8 | 104.2 |
I1P-106 | 1 1/16 | 1 7/8 | 1/2 | 1/4-28 ×5/8 | 120.6 |
I1P-112 | 1 1/8 | 1 7/8 | 1/2 | 1/4-28 ×5/8 | 113.7 |
Use:
single split shaft collars are used in a variety of application and industries. Examples include agricultural implements, office machines, exercise equipment, mixers, and printing presses.A variety of specialized products are available. Knurled shaft collars provide a friction surface for hand gripping and are suitable for conveyors and other applications which require frequent collar adjustment. Hexagonal-bore shaft collars are suitable for power transmission and drive applications. Heavy duty shaft collars feature large cross sections and sturdy clamping screws for added holding power. Because heavy-duty shaft collars provide better vibration and shock resistance, they are designed for applications such as off-road, mining, paper and steel mill equipment.
OUR SERVICE:
1) Competitive price and good quality
2) Used for transmission systems.
3) Excellent performance, long using life
4) Could be developed according to your drawings or data sheet
5) Pakaging:follow the customers’ requirements or as our usual package
6) Brand name: per every customer’s requirement.
7) Flexible minimum order quantity
8) Sample can be supplied
MAIN PRODUCTS:
1) Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate;
2) Forging, Casting, Stampling Part;
3) V Belt Pulley and Taper Lock Bush; Sprocket, Idler and Plate Wheel;Spur Gear, Bevel Gear, Rack;
4) Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc.;
5) Shaft Coupling:including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling, Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint;
6) Shaft Collars: including Setscrew Type, Single Split and Double Splits;
7) Timing Belt: including Rubber and PU timing belts for industrial;
8) Other customized Machining Parts according to drawings (OEM).
Company Information
ZheJiang Mighty Machinery Co., Ltd. specializes in manufacturing Mechanical Power Transmission Products.
We Mighty is the division/branch of SCMC Group, which is a wholly state-owned company, established in 1980.
About Mighty:
-3 manufacturing factories, we have 5 technical staff, our FTY have strong capacity for design and process design, and more than
70 workers and double shift eveyday.
-Large quality of various material purchase and stock in warhouse which ensure the low cost for the material and production in
time.
-Strick quality control are apply in the whole prodution. we have incoming inspection,process inspection and final production
inspection which can ensure the perfect of the goods quality.
-14 years of machining experience. Long time cooperate with the Global Buyer, make us easy to understand the csutomer and handle the export.
MIGHTY’s products are mainly exported to Europe, America and the Middle East market. With the top-ranking management, professional technical support and abundant export experience, MIGHTY has established lasting and stable business partnership with many world famous companies and has got good reputation from CZPT customers in international sales.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=10000USD, 30% T/T in advance ,balance before shippment
We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit.To supply customers excellent quality products with good price and punctual delivery time is our responsibility.
Standard Or Nonstandard: | Standard & Custom |
---|---|
Shaft Hole: | Standard & Nonstandard |
Bore Diameter: | 8-65 |
Structure: | Flexible |
Material: | Steel/Aluminum/Stainless Steel |
Type: | Collar |
Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
What are the best practices for maintaining split collars in corrosive environments?
Maintaining split collars in corrosive environments is essential to ensure their longevity and optimal performance. Here are best practices for maintaining split collars in such conditions:
- 1. Material Selection: Choose split collars made from corrosion-resistant materials. Stainless steel or plastic collars are often suitable for corrosive environments due to their resistance to rust and corrosion.
- 2. Regular Inspection: Conduct routine inspections to check for signs of corrosion or wear on the split collars. Early detection of issues allows for timely maintenance.
- 3. Lubrication: Apply a suitable lubricant to the collar’s interior surface and the shaft. Lubrication can help reduce friction and prevent corrosion. Choose a lubricant compatible with the collar material and the environmental conditions.
- 4. Gasket Seals: In highly corrosive environments, consider using split collars with gasket seals. These seals provide an additional layer of protection against moisture and corrosive agents.
- 5. Protective Coatings: Some split collars can be coated with corrosion-resistant materials or coatings. These coatings enhance their resistance to corrosive elements.
- 6. Regular Cleaning: Clean the split collars and the surrounding components regularly to remove any accumulated corrosive substances, dirt, or debris. Use appropriate cleaning agents that won’t harm the collar material.
- 7. Tightening Checks: Periodically check the tightness of split collars to ensure they remain secure on the shaft. Corrosion can weaken the grip over time, so re-tighten as necessary.
- 8. Environmental Sealing: If possible, create an environmental barrier or enclosure around the machinery or equipment to minimize exposure to corrosive elements. This can help extend the life of split collars.
- 9. Replacement of Damaged Collars: If a split collar shows significant signs of corrosion or wear, consider replacing it with a new one. Regularly replace any gasket seals if they deteriorate.
- 10. Training and Education: Ensure that maintenance personnel are trained and educated on the best practices for maintaining split collars in corrosive environments. Knowledge of proper maintenance procedures is crucial.
By following these best practices, you can prolong the life of split collars in corrosive environments and maintain the reliability of your machinery or equipment. It’s important to adapt maintenance routines based on the specific environmental challenges your machinery faces.
In which industries are split collars commonly used, and what makes them suitable for those applications?
Split collars find applications across various industries due to their versatility and ease of use. Here are some of the industries where split collars are commonly used and the reasons they are suitable for those applications:
- 1. Manufacturing and Machinery: Split collars are extensively used in manufacturing and machinery industries for securing components on shafts, including pulleys, gears, and sprockets. Their ease of installation and reusability make them ideal for rapid assembly and maintenance.
- 2. Automotive: In the automotive industry, split collars are employed for various applications, such as locking components on axles, steering systems, and transmission shafts. They offer precision and reliability in dynamic environments.
- 3. Aerospace: Split collars are used in aircraft and aerospace applications where precision and weight considerations are critical. They provide a secure grip without adding unnecessary weight to the aircraft’s components.
- 4. Robotics: In robotics, split collars play a role in securing joints and moving parts on robot arms and assemblies. Their compact design is well-suited for the limited space often found in robotic systems.
- 5. Agricultural Machinery: Split collars are used in agricultural equipment for tasks such as securing augers, conveyor systems, and other moving components. Their durability and ease of maintenance are advantageous in agricultural settings.
- 6. Medical Devices: In the medical industry, split collars can be found in various medical devices, including diagnostic equipment and surgical instruments. Their precision and clean design make them suitable for sensitive applications.
- 7. Food and Beverage: Split collars are utilized in food and beverage processing equipment. They are often made from materials suitable for food-grade applications, ensuring compliance with hygiene standards.
- 8. Mining and Heavy Equipment: In mining and heavy equipment, split collars are used to secure components in challenging environments. Their robust construction and reusability make them well-suited for heavy-duty applications.
- 9. Woodworking and Wood Processing: In woodworking machinery, split collars secure tools and components on shafts, providing the necessary stability and precision for cutting, shaping, and finishing wood products.
- 10. Marine and Shipbuilding: Split collars are used in marine applications, such as securing propeller shafts and other critical components. Corrosion-resistant materials are often employed in marine collars.
What makes split collars suitable for these applications is their combination of advantages, including ease of installation, reusability, precision, and the ability to accommodate various shaft sizes. Additionally, split collars are available in a wide range of materials, allowing them to meet the specific requirements of different industries, whether it’s the aerospace demand for lightweight collars or the food and beverage industry’s need for corrosion-resistant options.
Are there customer reviews available for popular brands of split collars to gauge user satisfaction?
Yes, customer reviews are valuable resources to gauge user satisfaction and learn about the performance of popular brands of split collars. Here’s where you can find customer reviews:
- 1. Online Retailers: Many online retailers, such as Amazon, provide customer reviews and ratings for split collars. You can read feedback from buyers who have purchased and used the products.
- 2. Manufacturer Websites: Some manufacturers feature customer testimonials and reviews on their official websites. These reviews often highlight the strengths and advantages of their split collar products.
- 3. Industrial and Mechanical Forums: Online forums and communities dedicated to mechanical components and engineering may have discussions and reviews about split collars. You can find insights and experiences shared by professionals and enthusiasts.
- 4. Industry-Specific Websites: Websites and platforms dedicated to specific industries, such as manufacturing or agriculture, may include user reviews of mechanical components, including split collars.
- 5. Social Media Groups: Explore social media groups and pages related to mechanical engineering, industrial equipment, or specific applications. Members may share their experiences and reviews of split collars they have used.
- 6. Industrial Directories: Some industrial directories and catalogs include user-generated reviews and ratings for mechanical components. You can search for split collar reviews in these directories.
- 7. Online Marketplaces: Besides purchasing, online marketplaces like Amazon and eBay often host customer reviews and ratings for split collars, providing insights into user satisfaction.
- 8. Word of Mouth: Network with colleagues and peers in your industry who may have experience with split collars. They can provide recommendations and share their satisfaction with specific brands.
- 9. Mechanical Engineering Blogs: Some mechanical engineering blogs and websites may publish reviews and articles about various mechanical components, including split collars. These articles may include user experiences.
- 10. Ask for Recommendations: Don’t hesitate to ask for recommendations and reviews from suppliers or manufacturers. They can share information about customer feedback and experiences with their products.
When reading customer reviews, pay attention to the overall rating, specific pros and cons mentioned, and any comments related to the application or use of the split collars. This information can help you make an informed decision and select the right brand and product for your needs.
editor by CX 2023-11-07
China Standard High Quality CNC Machining Parts Double Split Shaft Collars for Custom manufacturer
Product Description
LCH(HangZhou WeiHangZhoug Precision Metal Co., Ltd.)was found in 2008,with a total investment of $1.5 million,over 4,500 square meters,equiped with the most advanced high precision CNC Milling machine(30sets), CNC turning machine(32sets),CNC machining center,automatic lathe and various kinds of secondary processing equipment more than 80 sets.
Don’t hesitate to contact us,best Price best quality best service to you.
Customize various parts with CNC turning/CNC milling/CNC lathe/Casting parts( OEM & ODM)
Send us 3D drawing,we will help make it true!!!
1.Aluminum/Brass/ stainless steel Precision Product | 2.Extrusion/ Profile |
3.Hardware | 4.Injection molding |
5.Aluminum Frame | 6.Furniture Part |
7.Aluminum Office and Living Product | 8.CNC Precision Milling Part |
9.CNC Precision Turning Part | 10.Punch& Stamping& Stretching& Riveting& Assembly |
11.Die Casting& Welding& Forging& Bending Part | 12.Medical Aluminum Part |
13.Aluminum Pipe | 14.Large Cross-section/ High Challenge Heat Sink |
15.Mechanical Industrial product/ Auto Part | 16.LED Aluminum Accessory |
17.Mold Design and Manufacture | 18.Surface treatment |
1.We are True manufacture with competitive price and fast lead time.
2.we have 2 platform:alibaba & made in China,Rich export experience.
3.High quality and best services,Advanced equipment & Professional experience.
Product Description
High Precision! High-End Finish! Excellent Quality! Best Machining!
(1).Material:Brass/ aluminum/iron/Tin/ stainless steel
(2).Surface Finished: Anodize &Sandblasting
(3).Process: CNC Turning
(4).Tolerance:0.02mm
Parts Information:
(1). Applicable Material—Aluminum/zinc alloy, iron, steel alloy, plastic, brass, steel, and stainless steel
(2). Surface treatment—polishing, zinc plating, nickel plating, chrome plating, anodizing.
(3). Payment Terms: 40% deposit before production and 60% balance before arrange shipping
(4). Packaging: Standard package/ Pallet or container/ as per customized specifications.
(5). Shipment Terms: Express & air freight is preferred / sea freight/ as per customized specifications.
We have professional engineers,advanced equipment.more than 5, 000sqm workshop and about 60 sets CNC turning and milling machine make us a modernized and standardized factory. Now we have more than 100 workers, and 5 engineers, as well as 26 professional technicians. Our well-equipped CNC machine workshop has a comprehensive range of precision machining center, milling and turning equipment, all using CNC technology, which enables us to meet the exacting demands of our customers
How we can keep the high quality parts always?
1.All our material will be tested by SGS before production
2. Full control of process:
(1).During the part production,our QC worker will inspect the part size every 1 hour,this will help us to keep the correct tolerance during production
(2). When the parts machining finished,they will be arranged to have surface finished(such as anodize or powder coated),after that,our QC worker will inspect the parts again,because after surface finished,part tolerance may be difference sometimes,if there is any defective parts we found,we will pick them out directly
(3). Before shipping,our package worker will check the part surface and see if there is any scrach or any other thing that affect the part looking,if yes,pick them out.
Customer comments
Conclusion
Thanks for your kind attention, looking CZPT to your inquiry and we ensure tip top quality products with the best lead-time being provided!any questions just feel free to ask me.Welcome to our factory,best wishes to you!
Condition: | New |
---|---|
Certification: | GS, ISO9001 |
Customized: | Customized |
Material: | Brass/Aluminum/Titanium/Stainless Steel etc |
Finish: | Anodized ,Sandblasting,etc |
Tolerance: | +/- 0.02mm |
Samples: |
US$ 2.5/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Are there tutorials available on selecting the right split collar based on environmental conditions?
Yes, you can find tutorials and educational resources on selecting the right split collar based on environmental conditions. Choosing the appropriate split collar is crucial to ensure optimal performance in different environments. Here’s where to find tutorials and guidance:
- 1. Manufacturer Websites: Many split collar manufacturers provide resources on their websites, including selection guides. These guides often consider factors like temperature, humidity, and chemical exposure to help you choose the right collar for your specific environment.
- 2. Online Engineering Communities: Engineering forums and communities frequently discuss the selection of components, including split collars. You can ask questions and gather insights from experienced engineers regarding environmental considerations.
- 3. YouTube and Video Platforms: Video tutorials on platforms like YouTube can provide visual guidance on selecting split collars for specific environmental conditions. These videos may include real-world examples and case studies.
- 4. Technical Manuals and Guides: Manufacturers often include detailed technical manuals and guides with their products. These documents can provide in-depth information on selecting split collars based on environmental factors.
- 5. Industry Associations: Industry-specific associations and organizations may offer resources and publications that address the selection of components like split collars for particular environments, such as aerospace, marine, or food processing.
- 6. Online Retailers: Some online retailers provide selection tools and guidelines to help customers choose the right split collar based on environmental conditions. These tools often include filter options for material and environment type.
- 7. Engineering Schools and Institutions: Educational institutions may offer courses or seminars that cover component selection, including split collars, for various environments. Check with local universities or technical schools for educational resources.
- 8. Supplier Consultation: Contacting split collar suppliers directly can be a valuable resource. They can provide expert advice and recommendations based on your specific application and environmental challenges.
- 9. Online Articles and Blogs: Technical websites and engineering blogs may feature articles that discuss the selection of split collars in different environments. These articles often provide practical insights and tips.
- 10. Webinars and Seminars: Look for webinars and seminars conducted by industry experts and suppliers. These events may cover the selection process and considerations for split collars in varying environmental conditions.
When selecting split collars based on environmental conditions, consider factors such as temperature, moisture, chemicals, abrasion, and exposure to corrosive elements. It’s essential to choose collars that are compatible with the specific challenges your machinery or equipment will face in its operating environment.
Are there educational resources on the advantages of split collars in terms of ease of installation and adjustment?
Yes, there are educational resources available to learn about the advantages of split collars in terms of ease of installation and adjustment. These resources can provide valuable information on the benefits and best practices. Here’s where you can find them:
- 1. Manufacturer Websites: Many split collar manufacturers have informative websites that include product guides, datasheets, and educational materials. These resources often explain how split collars offer ease of installation and adjustment.
- 2. Online Videos: Video-sharing platforms like YouTube feature instructional videos and tutorials on the installation and adjustment of split collars. These videos can visually demonstrate the process and advantages.
- 3. Technical Manuals: Manufacturers often provide technical manuals and user guides with their products. These documents contain detailed instructions and insights into the ease of installation and adjustment.
- 4. Industrial Forums and Communities: Online forums and community websites related to machinery and engineering frequently discuss the benefits of split collars. You can find user experiences and advice on installation and adjustment.
- 5. Educational Institutions: Engineering and technical schools may include split collar installation and adjustment as part of their coursework. Course materials and lab manuals can be excellent resources.
- 6. Industry Publications: Magazines, journals, and publications in the engineering and manufacturing sectors often feature articles on various components, including split collars. These articles can highlight their advantages.
- 7. Trade Associations: Industry-specific trade associations may offer educational resources, webinars, or seminars that cover the benefits and practical aspects of using split collars.
- 8. Online Articles and Blogs: Many technical websites and engineering blogs publish articles explaining the advantages of split collars and providing tips for installation and adjustment.
- 9. Supplier Websites: Suppliers of split collars often include information on their websites about the advantages of these components, including ease of installation and adjustment.
- 10. Webinars and Seminars: Look for webinars and seminars hosted by experts in the field of mechanical engineering. These events may focus on specific components like split collars.
By exploring these educational resources, you can gain a deeper understanding of how split collars simplify the installation and adjustment process in various machinery and mechanical applications.
Can you recommend split collars suitable for applications with limited installation space?
Absolutely, there are split collars specifically designed for applications with limited installation space. These compact and space-efficient collars offer reliable performance in tight quarters. Here are some recommendations:
- 1. Thin-Line Split Collars: Thin-line split collars are engineered to have a reduced profile, making them ideal for applications with limited space. They are available in various materials and are designed for easy installation and removal.
- 2. Low-Profile Split Collars: Low-profile split collars are designed to be shorter in height, allowing them to fit into tight spaces without protruding. These collars are commonly used in compact machinery and equipment.
- 3. Clamping Lever Split Collars: Split collars with clamping levers provide a secure grip while offering quick and tool-free adjustments. The lever design is efficient in applications where accessibility is limited.
- 4. Set Screw Miniature Split Collars: Miniature split collars equipped with set screws are designed for small shaft sizes and limited space. They provide a strong hold without compromising space requirements.
- 5. Threaded Split Collars: Threaded split collars are compact and can be installed using simple hand tools. They are suitable for applications where you need a secure fit in confined spaces.
- 6. Plastic Split Collars: Some plastic split collars, such as those made from acetal or nylon, are compact and lightweight. They are corrosion-resistant and ideal for applications with size constraints.
- 7. Step Bore Split Collars: Split collars with a step bore design provide a smaller contact area on the shaft, making them space-efficient. They are effective for securing components in limited spaces.
- 8. Double Split Collars: Double split collars offer exceptional holding power while maintaining a compact design. They are often used in applications where space is a premium.
When selecting a split collar for applications with limited installation space, consider factors such as the shaft diameter, material compatibility, and the available height and width for collar installation. Additionally, always refer to the specific manufacturer’s recommendations and product specifications to ensure a proper fit.
editor by CX 2023-11-06
China Hot selling 1/4′ ′ 3/8′ ′ 1/2′ ′ 3/4′ ′ 1′ ′ Two Piece Double Split Shaft Collar Clamp aluminum shaft collar
Product Description
Certification | ISO9001:2018;SGS;TS16949 |
Quality |
CNC machine, CNC Turning, CNC Milling, CNC center machine, auto lathe machine, Wire-cutting Machine CNC punching machines, CNC bending machines CNT stamping machine, CNC/auto lathe machine, Drilling machine, Hydraulic machine, Riveting machine, Tapping machine, welding machine, Film attaching machine, etc. |
Materials |
Aluminum, Steel, SPCC, SGCC,SECC, SPTE, Stainless steel, Brass, Copper, Bronze, ABS, PC, PO, POM, Nylon, etc. |
Surface finish |
Anodized, Oxide, Plating, Brushing, Polishing, Blackened, Powder coating, Sandblasting, Laser engraving Zn-plating, Ni-plating, Cr-plating, Tin-plating, copper-plating, the wreath oxygen resin spraying, the heat disposing, hot-dip galvanizing, black oxide coating, painting, powdering, color zinc-plated, blue-black zinc-plated, rust preventive oil, titanium alloy galvanized, silver plating, plastic, electroplating, anodizing, etc |
Inspection Equipment |
CMM, Projection, Calipers, Micro caliper, Thread Micro caliper, Pin gauge, Caliper gauge, Pass meter, Pass meter, etc. |
Drawing formation | PDF, CAD/DWG/DXF, IGS/STP etc. |
HangZhou CZPT Industrial Co., Ltd. is a comprehensive factory that specialized in fasteners, CNC parts, stamping parts, machinery parts, and so on. Since the establishment of the company, we have passed ISO9001: 2018, SGS, TS16949.
Our factory covers an area of 5,000 square CZPT and has 58 employees, including 5 R & D personnel and 5 quality inspection personnel.
Major areas of service include automotive, bicycle and motorcycle, industrial automation, agricultural equipment, digital electronics, medical equipment, and so on.
Looking CZPT to your cooperation.
1. We have Specialized QC testers to check the products quality according to customers’ needs.
2. We have IQC to check the dimensions and surface of the incoming material.
3. We have PQC to inspect full-course during the processing.
4. We have FQC to inspect all the plating products from outsides and make the 100% inspection before the shipments.
FAQ:
Q1: Why choose ZheJiang n?
To provide our customers with first-class services in the supply of quality screws minimizing costs.
Q2: How is quality ensured?
All our processes strictly adhere to ISO9001:2018 procedures. We have strict quality control from producing to delivery. Our company had strong technology support, 80% of our colleagues are master or bachelor’s degree. We have cultivated a group of managers who are familiar with product quality , good at modern concept of management.
Q3: Can You Strictly Follow The Tolerance on The Drawing And Meet The High Precision?
Yes, we can, we can provide high precision parts and make the parts as your drawing.
Q4: How should I order and make payment?
By T/T, for samples 100% with the order; for production, 30% paid for deposit by T/T before production arrangement, the balance to be paid before shipment. negotiation accepted.
Q5: What’s your Delivery Time?
Standard parts: 7-20days
Non-standard parts: 15-25days
We will make the delivery as soon as possible with the guarantee quality
Q6:How to Custom-made (OEM/ODM)?
If you have a new product drawing or a sample, please send to us, and we can custom-made the as your required. We will also provide our professional advices of the products to make the design to be more realized & maximize the performance.
Q7:Which mode of transport would be better?
In general, the product are heavy, we advice to make delivery by sea, Also we respect your views of other transportation as well.
Standard Or Nonstandard: | Standard |
---|---|
Shaft Hole: | 8-24 |
Torque: | >80N.M |
Bore Diameter: | 19mm |
Speed: | 8000r/M |
Structure: | Rigid |
Samples: |
US$ 20/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
What are the temperature resistance properties of split collars?
The temperature resistance properties of split collars vary depending on the material they are made from. Here’s a general overview of temperature resistance for common split collar materials:
- 1. Steel Split Collars: Steel split collars can generally withstand a wide range of temperatures. Standard steel split collars are suitable for temperatures from -40°C to 250°C (-40°F to 482°F). For higher-temperature applications, heat-resistant steel alloys may be used.
- 2. Aluminum Split Collars: Aluminum split collars have a temperature resistance range of approximately -40°C to 150°C (-40°F to 302°F). They are lighter than steel but may not be suitable for extremely high-temperature environments.
- 3. Stainless Steel Split Collars: Stainless steel split collars are highly corrosion-resistant and can endure a wide temperature range. They are suitable for temperatures from -100°C to 300°C (-148°F to 572°F) and often used in harsh environments.
- 4. Plastic Split Collars: The temperature resistance of plastic split collars varies with the type of plastic. Common plastics like nylon and acetal have a range of -40°C to 80°C (-40°F to 176°F). Some specialty plastics offer higher temperature resistance, up to 150°C (302°F).
- 5. Industry-Specific Materials: In some industries, specialty materials with enhanced temperature resistance are used. For example, aerospace applications may require split collars made from materials capable of withstanding extreme temperature fluctuations encountered during flight.
- 6. Coatings and Treatments: In addition to the base material, coatings and treatments can improve the temperature resistance of split collars. For example, heat-resistant coatings can extend the upper temperature limit.
It’s important to consult the manufacturer’s specifications for specific split collar products to determine their exact temperature resistance properties. When selecting split collars for applications in extreme temperature conditions, consider not only the collar material but also factors like the duration of exposure and the presence of additional heat-resistant treatments.
Are there educational resources on the advantages of split collars in terms of ease of installation and adjustment?
Yes, there are educational resources available to learn about the advantages of split collars in terms of ease of installation and adjustment. These resources can provide valuable information on the benefits and best practices. Here’s where you can find them:
- 1. Manufacturer Websites: Many split collar manufacturers have informative websites that include product guides, datasheets, and educational materials. These resources often explain how split collars offer ease of installation and adjustment.
- 2. Online Videos: Video-sharing platforms like YouTube feature instructional videos and tutorials on the installation and adjustment of split collars. These videos can visually demonstrate the process and advantages.
- 3. Technical Manuals: Manufacturers often provide technical manuals and user guides with their products. These documents contain detailed instructions and insights into the ease of installation and adjustment.
- 4. Industrial Forums and Communities: Online forums and community websites related to machinery and engineering frequently discuss the benefits of split collars. You can find user experiences and advice on installation and adjustment.
- 5. Educational Institutions: Engineering and technical schools may include split collar installation and adjustment as part of their coursework. Course materials and lab manuals can be excellent resources.
- 6. Industry Publications: Magazines, journals, and publications in the engineering and manufacturing sectors often feature articles on various components, including split collars. These articles can highlight their advantages.
- 7. Trade Associations: Industry-specific trade associations may offer educational resources, webinars, or seminars that cover the benefits and practical aspects of using split collars.
- 8. Online Articles and Blogs: Many technical websites and engineering blogs publish articles explaining the advantages of split collars and providing tips for installation and adjustment.
- 9. Supplier Websites: Suppliers of split collars often include information on their websites about the advantages of these components, including ease of installation and adjustment.
- 10. Webinars and Seminars: Look for webinars and seminars hosted by experts in the field of mechanical engineering. These events may focus on specific components like split collars.
By exploring these educational resources, you can gain a deeper understanding of how split collars simplify the installation and adjustment process in various machinery and mechanical applications.
Where can I find reliable suppliers for high-quality split collars suitable for various applications?
Finding reliable suppliers for high-quality split collars is essential to ensure the performance and reliability of your mechanical assemblies. Here are some sources to help you locate reputable suppliers:
- 1. Industrial Supply Companies: Established industrial supply companies often stock a wide range of mechanical components, including split collars. You can contact these companies and inquire about their product offerings and suppliers.
- 2. Online Marketplaces: Online marketplaces like Amazon, eBay, and Alibaba have numerous sellers offering split collars. Read product descriptions, reviews, and seller ratings to make informed decisions.
- 3. Manufacturer Websites: Visit the official websites of split collar manufacturers. Many manufacturers provide information about their products, specifications, and contact details for inquiries and purchases.
- 4. Local Distributors: Check if there are local distributors or dealers in your area who supply mechanical components, including split collars. Working with local distributors can provide convenience and support.
- 5. Industrial Trade Shows: Attend industrial trade shows and exhibitions related to mechanical components. These events often feature suppliers and manufacturers showcasing their products, allowing you to assess the quality of split collars in person.
- 6. Online Industrial Directories: Online industrial directories, such as Thomasnet and GlobalSpec, can help you search for suppliers and manufacturers of split collars based on your specific requirements.
- 7. Recommendations from Peers: Seek recommendations from colleagues, peers, or industry professionals who have experience with split collars. They can provide valuable insights into reputable suppliers.
- 8. Industry Associations: Contact industry-specific associations related to your field. They may have lists of approved suppliers and manufacturers of mechanical components, including split collars.
- 9. Specialty Suppliers: Some suppliers specialize in specific types of split collars or offer customized solutions. Explore specialty suppliers to find collars tailored to your unique application needs.
- 10. Reviews and Ratings: Utilize online reviews and ratings on platforms like Trustpilot or industry forums to assess the reputation and reliability of suppliers. High ratings and positive reviews are indicators of trustworthiness.
- 11. Request Samples: Some suppliers may offer samples or trial products to help you evaluate the quality of their split collars before making a bulk purchase.
When sourcing high-quality split collars, it’s crucial to consider factors such as material quality, precision engineering, and compliance with industry standards. Always communicate with potential suppliers to discuss your specific requirements and assess their ability to meet your needs.
editor by CX 2023-11-03
China manufacturer 8mm Clamp Shaft Collar Single Split Collar Double Split Shaft Collar shaft collar buy online
Product Description
Product Description
ONE-PIECE
One-piece shaft collars wrap around the shaft for even distribution of clamping forces. This results in a tight fit and greater holding power, without the shaft damage caused by set screws. Clamp collars are easy to remove, indefinitely adjustable, and work well on virtually any shaft. we uses carefully selected materials and proprietary processes on its one-piece collars to ensure the clamping gap remains open for simpler and more precise adjustment, installation and fit. we manufactures one-piece clamp shaft collars in 12L15 lead-free steel with a zinc or proprietary black oxide finish, 303 and 316 stainless steel, high-strength 2571 aluminum, and engineered plastic. Bore sizes range from 1/8″ to 6″ and 3mm to 150mm.ONE-PIE
1.materials:stainless steel,alloy steel ,aluminum ,brass etc.
2.Finish: Zinc plating, Nickel plating,nature
3.competitive price ,prompt delivery
4.OEM service as your drawings
Technics
1.Milling 2.grinding 3.Turning 4.wire-cutting 5.CNC bending 6.CNC machining 7.Stamping 8.forging 9.boring 10.broaching and so on .
Accuracy
1.Milling:0.01mm 2.Turning:0.01mm 3.Grinding:0.002mm 4.Wire-cutting :0.005mm 5.CNC Machining : 0.005mm
Company Profile
RunCheng Import and Export Co., Ltd is the leading professional OEM/ODM manufactory of auto parts, hardware, graphite products, sanitary ware and mechanical items. Product ranges include CNC machining parts, casting parts, stamping parts, forged parts, turning parts, pipe fitting, rubber parts, CZPT and many more.
We ensure the highest quality by using only the highest quality raw materials and by subjecting all our products to a rigorous Quality Control System. The quality control of our large-scale production process conforms to ISO9001 standards.
We have won the trust of our clients with our top quality products and outstanding service.
Our business is built on the following 4 advantages, namely Full range of products, Top quality, Outstanding service and Reasonable price!
Contact us at once and let′ S do mutually beneficial business together!
Production ability
EQUIPMENT LIST |
||||
NAME
|
SPECIFICATION |
BRAND |
ORIGINAL PLACE |
QUANTITY |
CNC Machines |
Graph 600 |
KNUTH |
CHINA |
20 |
1370 |
KAFO |
TAPAN |
20 |
|
EDM Machines |
ZNC450 |
BHangZhouNA |
ZheJiang |
20 |
ZNC430 |
BHangZhouNA |
ZheJiang |
30 |
|
Grinding Machines |
ACC-350ST |
BESFORD |
CHINA |
50 |
Auto Lathe Machining |
L150G-II |
OKUMA |
CHINA |
80 |
Wire Cutting Machines |
DK7732 |
NEW FAST |
CHNA |
30 |
Milling Machine |
SHCM-97A |
GENTIGER |
ZheJiang |
20 |
CMM Machine |
CRT-PA574 |
MITUTYO |
JAPAN |
10 |
Hardness Tester |
TILO-T60 |
MITUTYO |
JAPAN |
5 |
Productions showing:
Equipments & Working plant:
Worry about our quality problem?
We are an IATF16949:2016 Certifed supplier, strictly execute inspection on ISO quality control system. All our products will pass 10-step inspections: it starts from incoming material inspection to IPQC, then FQC and final inspection with reports before shipment.
Packaging & Shipping
Generally carton or wooden case or plastic foam with standard export wooden pallet , or as per consumer’s requirements.
Certifications:
Your Satisfaction, Our Motivation!
FAQ
Q1. Are you factory or trading company?
A: We are a customized factory with independent oversea trading office .
Q2.Can you provide sample for us?
A: Yes, free sample is available
Q3. What raw material do you use?
A: Stainless Steel, Carbon Steel, Mild Steel, Galvanized Steel, Aluminum alloy, brass, copper, Aluminum etc.
Q4. What finishes can you provide?
A: powder coating, polishing, zinc/nickel /chrome plating, painting, anodized, hot dip galvanized, sandblasted etc.
Q5. How do you ensure quality control?
A: We inspect every process based on your drawings or samples and also check the products before packing
Q6. Is small quantity available?
A: Yes, Small quantity for trial order is available.
Q7. How do you ship the goods?
A: We have our cooperation forwarder, they can deliver the goods to you in very short time with competitive price, and you can ship by your own agent as your convenience.
Q8. How about your delivery time ?
A: 3-10 days for samples and 15-45 days for mass production .
Q: How To Place A Order?
* You send us drawing or sample
* We make the sample and send it to you
* You think the sample is good then place an order and pay us 30% deposit
* We start to make the product
* When the goods is done, we take photoes for your check and you then pay the balance
* We deliver the products to courier company
Application: | Auto and Motorcycle Accessory, Machinery Accessory, Transmission |
---|---|
Standard: | GB, EN, JIS Code, TEMA, ASME, Customed |
Surface Treatment: | Anodizing |
Production Type: | Mass Production |
Machining Method: | CNC Turning |
Material: | Nylon, Steel, Plastic, Alloy, Aluminum, Cold Forming Steel |
Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
What are the temperature resistance properties of split collars?
The temperature resistance properties of split collars vary depending on the material they are made from. Here’s a general overview of temperature resistance for common split collar materials:
- 1. Steel Split Collars: Steel split collars can generally withstand a wide range of temperatures. Standard steel split collars are suitable for temperatures from -40°C to 250°C (-40°F to 482°F). For higher-temperature applications, heat-resistant steel alloys may be used.
- 2. Aluminum Split Collars: Aluminum split collars have a temperature resistance range of approximately -40°C to 150°C (-40°F to 302°F). They are lighter than steel but may not be suitable for extremely high-temperature environments.
- 3. Stainless Steel Split Collars: Stainless steel split collars are highly corrosion-resistant and can endure a wide temperature range. They are suitable for temperatures from -100°C to 300°C (-148°F to 572°F) and often used in harsh environments.
- 4. Plastic Split Collars: The temperature resistance of plastic split collars varies with the type of plastic. Common plastics like nylon and acetal have a range of -40°C to 80°C (-40°F to 176°F). Some specialty plastics offer higher temperature resistance, up to 150°C (302°F).
- 5. Industry-Specific Materials: In some industries, specialty materials with enhanced temperature resistance are used. For example, aerospace applications may require split collars made from materials capable of withstanding extreme temperature fluctuations encountered during flight.
- 6. Coatings and Treatments: In addition to the base material, coatings and treatments can improve the temperature resistance of split collars. For example, heat-resistant coatings can extend the upper temperature limit.
It’s important to consult the manufacturer’s specifications for specific split collar products to determine their exact temperature resistance properties. When selecting split collars for applications in extreme temperature conditions, consider not only the collar material but also factors like the duration of exposure and the presence of additional heat-resistant treatments.
Where can I find tutorials on the correct installation and removal of split collars?
Learning the correct installation and removal of split collars is crucial for ensuring their effective use in various applications. Here are some sources where you can find tutorials on this topic:
- 1. Manufacturer’s Websites: Many split collar manufacturers provide detailed installation and removal guides on their official websites. These guides often include step-by-step instructions and illustrations.
- 2. YouTube: YouTube is a valuable resource for visual tutorials. Search for video tutorials on the installation and removal of split collars. Many experts and manufacturers create informative videos on this subject.
- 3. Online Mechanical Engineering Forums: Online forums and communities focused on mechanical engineering may have discussions, guides, and tutorials related to the correct use of split collars. You can participate in discussions and ask for advice from experienced engineers.
- 4. Mechanical Engineering Blogs: Some mechanical engineering blogs and websites publish articles and tutorials about mechanical components, including split collars. These written guides often provide detailed instructions and tips.
- 5. Educational Institutions: Technical and vocational schools, as well as universities, may offer courses or resources related to mechanical components and their correct use. Check with educational institutions in your area for training opportunities.
- 6. Industry Publications: Industry-specific magazines and publications sometimes feature articles or tutorials on mechanical components. These resources can be a valuable reference for professionals in the field.
- 7. Books and Manuals: Books on mechanical engineering and machinery maintenance often include chapters or sections on collar installation and removal. Check your local library or online retailers for relevant books.
- 8. Webinars and Workshops: Some organizations and manufacturers conduct webinars and workshops on mechanical components, including split collars. These events can provide interactive learning opportunities.
- 9. Equipment Suppliers: Suppliers and distributors of industrial equipment may offer training or guidance on the correct use of mechanical components, including split collars. Contact them to inquire about available resources.
- 10. Hands-On Experience: Learning from experienced professionals or technicians who have hands-on experience with split collars is invaluable. Consider reaching out to colleagues or mentors for guidance.
When seeking tutorials, ensure that the information is up-to-date and relevant to your specific collar type and application. Following correct installation and removal procedures is essential for maintaining equipment reliability and safety.
Are there customer reviews available for popular brands of split collars to gauge user satisfaction?
Yes, customer reviews are valuable resources to gauge user satisfaction and learn about the performance of popular brands of split collars. Here’s where you can find customer reviews:
- 1. Online Retailers: Many online retailers, such as Amazon, provide customer reviews and ratings for split collars. You can read feedback from buyers who have purchased and used the products.
- 2. Manufacturer Websites: Some manufacturers feature customer testimonials and reviews on their official websites. These reviews often highlight the strengths and advantages of their split collar products.
- 3. Industrial and Mechanical Forums: Online forums and communities dedicated to mechanical components and engineering may have discussions and reviews about split collars. You can find insights and experiences shared by professionals and enthusiasts.
- 4. Industry-Specific Websites: Websites and platforms dedicated to specific industries, such as manufacturing or agriculture, may include user reviews of mechanical components, including split collars.
- 5. Social Media Groups: Explore social media groups and pages related to mechanical engineering, industrial equipment, or specific applications. Members may share their experiences and reviews of split collars they have used.
- 6. Industrial Directories: Some industrial directories and catalogs include user-generated reviews and ratings for mechanical components. You can search for split collar reviews in these directories.
- 7. Online Marketplaces: Besides purchasing, online marketplaces like Amazon and eBay often host customer reviews and ratings for split collars, providing insights into user satisfaction.
- 8. Word of Mouth: Network with colleagues and peers in your industry who may have experience with split collars. They can provide recommendations and share their satisfaction with specific brands.
- 9. Mechanical Engineering Blogs: Some mechanical engineering blogs and websites may publish reviews and articles about various mechanical components, including split collars. These articles may include user experiences.
- 10. Ask for Recommendations: Don’t hesitate to ask for recommendations and reviews from suppliers or manufacturers. They can share information about customer feedback and experiences with their products.
When reading customer reviews, pay attention to the overall rating, specific pros and cons mentioned, and any comments related to the application or use of the split collars. This information can help you make an informed decision and select the right brand and product for your needs.
editor by CX 2023-11-03
China Best Sales High Quality Double Split Shaft Collars shaft collar application
Product Description
AT industry is 1 supplier with more than 13 years experience on forging parts,Brass Parts,Auto Parts,Machining Parts.
Customize available when get drawing or sample.
Specifications
customized machine part whole seller
1.13 years’ experience;
2. sharp delivery
3.superior quality
aluminum 6061-t6 cnc milling machine part whole seller
1. All parts produced according to your CAD and 3D drawings or sample. Please send the drawings firstly, we will offer our quotation to you
within 2 days.
2. we specialized in manufacturing CNC machining products according to customers drawings or samples
3. Advanced equipment, excellent R&D teams and strict quality control system
4.These kinds of parts were made by high precision CNC machines. All the dimension were made as per customer requests .
5.cnc aluminum/thread cutting machining parts was 100% inspected before shipment.
6. The price will be FOB or CIF dollars. minium quantity was acceptable.
7. products showed here only present the capability of our business activities
We are dedicated to :
1.designing and manufacture of your unique metal products;
2.Turning your drawing to be a nice unique products;
3.Turning your idea to be a real nice products;
4.using The most advanced test equipments to ensure the quality ;
5.cnc aluminum/thread cutting machining parts that meet their needs.
Reject rate≤ 0.5%, Rework rate≤ 0.5%, On time delivery rate>95%
Material | Steel, Zinc,Stainless steel. |
Surface treatment | Nickel plating. Zinc plating, Chrome plating, Oxidation. Anodization |
Tolerance | +/-0.01mm or +/- 0.0004″ |
Thread Standard | NPT,BSP(G),M, GHT,UN,NPSM,BSPT(Tr),NPTF… |
Quality control | 100% inspection on critical dimensions |
Inspection equipment | Three axis meansuring machine for X.Y.Z. Projection meter. |
Production output | 100000.000 pieces/ month |
Productin range | Part ID from 2-500mm with tolerance +/-0.01mm |
Experience | 13 years of professional OEM service |
Supply chain process | PPAP |
Ability | To develop hundreds of new parts annually. |
Packaging | Standard export carton with palletized |
Lead time | 35 days regularly |
Term of Payment | T/T. L/C or Customer’s request |
ABOUT US:
A&T Industry is a contract manufacture and exporter of quality sand castings,
investment castings, lost foam castings, hot forgings, cold forgings, stampings,
machined parts, injectionmolded plastics parts, etc.
We are a dedicated team of customer focused industry professionals with
extensive experience in manufacturing, materials engineering,
quality assurance, logistics management and inventory control.
We utilize our experience and sources advantage to provide our customers
with cost effective and value based solutions to meet their engineering and
design needs while exceeding their quality and procurement requirements.
A&T Industry is located in HangZhou, a major seaport, Olympic Host City and
industrial center of China.
Assurance,
100% quality manufacturing.
We guarantee that our products meet your supplied specifications
Extremely competitive pricing
Delivery to your port or front door
4 —- 8 week lead times
We handle all paperwork
Partial container orders
Flexible payment options
Unique tooling options
Full range of packaging options from bulk to retail ready
Complete testing services available
FAQs
1. Where is your location?
We are located in HangZhou City of China and are closed to Airport. It takes 30minuts by car from Liuting Airport our company.
2. How long has the company been established?
AT INDUSTRY was established in 2009. There is 6 years exporting experiences.
3. How many employees do you have?
Administration / sales 4
Engineering / design as our partner 8
Production as our partners 120
Quality assurance / inspection 10
4. Which countries do you export to?
U.S.A, Germany, France, Italy, UK, Brazil, Middle east of Asia, Thailand,
5. What proportion of your goods are exported?
100% of our production are exported to all over the world.
6. How long does it take to receive samples?
a) Pattern:30-45days after order
b) Sample:30days after pattern finishing.
c) The lead time is the general production period and does not include the transportation time.
7. New product development process
Got tooling order and sample order with 50% deposit—Hold a meeting with the relation dept. to ensure the developing schedule—Design pattern, fixture and gauge and making them in our house—mold steel buying—Machining—Inspection—Send out the sample with initial inspection report.
8. How long is the manufacturing lead time?
Mass Production: 90days after sample approval by yours.
The lead time is the general production period including the transportation time.
We could make some special production arrangement effectively if customer has urgent need.
9. What basis can we buy goods?
We generally offer customers prices FOB& CIF (Carriage, Insurance & Freight). The CIF includes the freight cost to your nominated sea port.
We do provide clearance of goods which needs to be handled by a local freight forwarder.
All local costs and taxes are the responsibility of the buyer. We are happy to offer advisement on shipping if required.
10. What are the payment terms?
Payment terms are negotiable and will improve for long term customers.
During the initial stages, we request 50% of tooling fee in advance with the balance payable on acceptance of samples.
Production orders can be negotiable. We prefer 50% deposit and the balance by T/T before sails. But sometimes T/T 30 days after sails would also acceptable.
11. Which currency can we buy in?
We can deal in USD / Euro currency / GBP.
12. How long does it take to ship goods from China by sea?
It takes about 5 weeks to European ports plus 1 week customs clearance, so you can get the container within 6 to 7 weeks. It takes about 2 weeks to east coast and 3 weeks to west coast US ports. All sea goods are shipped from HangZhou Port.
13. How long does it take to ship goods from China by air?
It takes about 7 days to all major destinations.
14. Can we visit the factory to conduct an audit?
Yes, you are welcome to visit our partner factory by prior agreement.
15. How do we retain client confidentiality?
We are happy to CZPT Confidentiality Agreements with customers and will honor them.
16. Which languages do we do business in?
Although we do business with many countries around the world, we can only communicate effectively in Chinese English.
All information supplied should therefore be supplied in this form.
17. Is there a minimum volume of business required to conduct international purchasing?
There are no minimum volumes, but the prices of the goods, plus the fixed costs of importing makes it more economical to buy in high volumes. All potential customers will be assessed on an individual basis to determine if it appears a viable option for all parties to develop a relationship.
18. What type of parts you are specialized in?
Our business contains 2 areas,
one is for construction precast including lifting system, rigging hardware metal parts.
Another is customized metal business of quality sand castings, investment castings, lost foam castings, hot forgings, cold forgings, stampings, machined parts, injectionmolded plastics parts, etc.
19. Which kind of equipments do you have?
Forging friction press 160Ton, 300Ton, 630Ton, 1200Ton
Casting CZPT of 200kg, 500kg,1000kgs, 2000kgs
Press of 63ton, 120tons
CNC Machining center
CNC Vertical Lathe
CNC Lathe center
Boring machine
Drilling machine
Condition: | New |
---|---|
Certification: | CE, RoHS |
Customized: | Customized |
Material: | Iron |
Application: | Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery |
Package: | Within Wooden Crate |
Customization: |
Available
| Customized Request |
---|
Are there tutorials available on selecting the right split collar based on environmental conditions?
Yes, you can find tutorials and educational resources on selecting the right split collar based on environmental conditions. Choosing the appropriate split collar is crucial to ensure optimal performance in different environments. Here’s where to find tutorials and guidance:
- 1. Manufacturer Websites: Many split collar manufacturers provide resources on their websites, including selection guides. These guides often consider factors like temperature, humidity, and chemical exposure to help you choose the right collar for your specific environment.
- 2. Online Engineering Communities: Engineering forums and communities frequently discuss the selection of components, including split collars. You can ask questions and gather insights from experienced engineers regarding environmental considerations.
- 3. YouTube and Video Platforms: Video tutorials on platforms like YouTube can provide visual guidance on selecting split collars for specific environmental conditions. These videos may include real-world examples and case studies.
- 4. Technical Manuals and Guides: Manufacturers often include detailed technical manuals and guides with their products. These documents can provide in-depth information on selecting split collars based on environmental factors.
- 5. Industry Associations: Industry-specific associations and organizations may offer resources and publications that address the selection of components like split collars for particular environments, such as aerospace, marine, or food processing.
- 6. Online Retailers: Some online retailers provide selection tools and guidelines to help customers choose the right split collar based on environmental conditions. These tools often include filter options for material and environment type.
- 7. Engineering Schools and Institutions: Educational institutions may offer courses or seminars that cover component selection, including split collars, for various environments. Check with local universities or technical schools for educational resources.
- 8. Supplier Consultation: Contacting split collar suppliers directly can be a valuable resource. They can provide expert advice and recommendations based on your specific application and environmental challenges.
- 9. Online Articles and Blogs: Technical websites and engineering blogs may feature articles that discuss the selection of split collars in different environments. These articles often provide practical insights and tips.
- 10. Webinars and Seminars: Look for webinars and seminars conducted by industry experts and suppliers. These events may cover the selection process and considerations for split collars in varying environmental conditions.
When selecting split collars based on environmental conditions, consider factors such as temperature, moisture, chemicals, abrasion, and exposure to corrosive elements. It’s essential to choose collars that are compatible with the specific challenges your machinery or equipment will face in its operating environment.
Are there educational resources on the advantages of split collars in terms of ease of installation and adjustment?
Yes, there are educational resources available to learn about the advantages of split collars in terms of ease of installation and adjustment. These resources can provide valuable information on the benefits and best practices. Here’s where you can find them:
- 1. Manufacturer Websites: Many split collar manufacturers have informative websites that include product guides, datasheets, and educational materials. These resources often explain how split collars offer ease of installation and adjustment.
- 2. Online Videos: Video-sharing platforms like YouTube feature instructional videos and tutorials on the installation and adjustment of split collars. These videos can visually demonstrate the process and advantages.
- 3. Technical Manuals: Manufacturers often provide technical manuals and user guides with their products. These documents contain detailed instructions and insights into the ease of installation and adjustment.
- 4. Industrial Forums and Communities: Online forums and community websites related to machinery and engineering frequently discuss the benefits of split collars. You can find user experiences and advice on installation and adjustment.
- 5. Educational Institutions: Engineering and technical schools may include split collar installation and adjustment as part of their coursework. Course materials and lab manuals can be excellent resources.
- 6. Industry Publications: Magazines, journals, and publications in the engineering and manufacturing sectors often feature articles on various components, including split collars. These articles can highlight their advantages.
- 7. Trade Associations: Industry-specific trade associations may offer educational resources, webinars, or seminars that cover the benefits and practical aspects of using split collars.
- 8. Online Articles and Blogs: Many technical websites and engineering blogs publish articles explaining the advantages of split collars and providing tips for installation and adjustment.
- 9. Supplier Websites: Suppliers of split collars often include information on their websites about the advantages of these components, including ease of installation and adjustment.
- 10. Webinars and Seminars: Look for webinars and seminars hosted by experts in the field of mechanical engineering. These events may focus on specific components like split collars.
By exploring these educational resources, you can gain a deeper understanding of how split collars simplify the installation and adjustment process in various machinery and mechanical applications.
Are there customer reviews available for popular brands of split collars to gauge user satisfaction?
Yes, customer reviews are valuable resources to gauge user satisfaction and learn about the performance of popular brands of split collars. Here’s where you can find customer reviews:
- 1. Online Retailers: Many online retailers, such as Amazon, provide customer reviews and ratings for split collars. You can read feedback from buyers who have purchased and used the products.
- 2. Manufacturer Websites: Some manufacturers feature customer testimonials and reviews on their official websites. These reviews often highlight the strengths and advantages of their split collar products.
- 3. Industrial and Mechanical Forums: Online forums and communities dedicated to mechanical components and engineering may have discussions and reviews about split collars. You can find insights and experiences shared by professionals and enthusiasts.
- 4. Industry-Specific Websites: Websites and platforms dedicated to specific industries, such as manufacturing or agriculture, may include user reviews of mechanical components, including split collars.
- 5. Social Media Groups: Explore social media groups and pages related to mechanical engineering, industrial equipment, or specific applications. Members may share their experiences and reviews of split collars they have used.
- 6. Industrial Directories: Some industrial directories and catalogs include user-generated reviews and ratings for mechanical components. You can search for split collar reviews in these directories.
- 7. Online Marketplaces: Besides purchasing, online marketplaces like Amazon and eBay often host customer reviews and ratings for split collars, providing insights into user satisfaction.
- 8. Word of Mouth: Network with colleagues and peers in your industry who may have experience with split collars. They can provide recommendations and share their satisfaction with specific brands.
- 9. Mechanical Engineering Blogs: Some mechanical engineering blogs and websites may publish reviews and articles about various mechanical components, including split collars. These articles may include user experiences.
- 10. Ask for Recommendations: Don’t hesitate to ask for recommendations and reviews from suppliers or manufacturers. They can share information about customer feedback and experiences with their products.
When reading customer reviews, pay attention to the overall rating, specific pros and cons mentioned, and any comments related to the application or use of the split collars. This information can help you make an informed decision and select the right brand and product for your needs.
editor by CX 2023-11-02