Tag Archives: aluminum shaft

China Douple Split Carbon Steel Shaft Collar aluminum shaft collar

Product Description

Products description

Shaft collar is a simple but important mechanical component. It is widely used in Power Transmission applications, such as motors and gearboxes. The Shaft collars are used as mechanical stops, locating components, and bearing faces. The simple design lends itself to easy installation 

–Set screw type/ Set Screw Shaft Collar
–Single Split Collar / One-piece Shaft Collar
–Double Split Collar / Two-piece Shaft Collar
–One-Piece Threaded Collar
–Double wide shaft collar

Set screw type is the most effective when used on a shaft made of a material which is softer than the set screw.

Threaded shaft collars offer the same quality and benefits of smooth bore Collars, meanwhile providing additional features. Threaded collars provide axial holding power which is superior to smooth bore collars, while offering easier installation and adjustment than solid ring locking devices. 

One-piece shaft collars wrap around the shaft for even distribution of clamping forces. This results in a tight fit and greater holding power, without the shaft damage caused by set screws. Clamp collars are easy to remove, indefinitely adjustable, and work well on virtually any shaft.

Two-piece shaft collars offer the same benefits as one-piece shaft collars with additional versatility and convenience. The split design is easily installed and disassembled, reducing labor and downtime when adjustment, removal, or replacement is necessary. These clamping forces provide the collar with a holding power superior to one-piece and set screw shaft collars.

Unik Shaft Collar Features: 
Superior fit, finish and holding power.
Tightly controlled face to bore perpendicularity.
Bore size stamped on every shaft collar.
Black oxide finish produces holding power and resisting corrosion.
DIN 12.9 for metric screws for maximum torque ability.
black oxide and zinc-plated steel, Stainless Steel, Aluminum

FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in single color box. If you have special request about packing, pls negotiate with us in advance, we can pack the goods as your request.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance. Other payments terms, pls negotiate with us in advance, we can discuss.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.We welcome sample order.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Hollow Axis

###

Samples:
US$ 0.8/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Hollow Axis

###

Samples:
US$ 0.8/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

Types of Shaft Collars

Clamp style shaft collars

A variety of styles of shaft collars are available for your machining needs. Clamp style shaft collars offer better flexibility and hold better than set screw collars. They are best for shaft materials that are softer than a setscrew. Clamp style collars are generally easier to maneuver, as they are two-piece and are hinged along the shaft.
Clamp style shaft collars come in two-piece and one-piece designs. One-piece clamp collars are typically used for a single-piece shaft, while two-piece clamp collars are used for multiple shafts. The one-piece clamp collar provides a more uniform holding force, while two-piece clamp collars provide more clamping force and can be installed anywhere on the shaft. Both styles are available in English and metric measurements.
The holding power of Clamp style shaft collars depends on their bore size and concentricity. The fastening hardware also affects torque transmission. Forged screws are generally stronger than broached screws, and are less likely to ream out. However, you still need to make sure that the material of the collar is strong enough to withstand the recommended screw torque.
Clamp style shaft collars are available in 1215 lead-free steel with a black oxide finish and zinc plating, as well as 303 and 316 stainless steel. They are also available in 2024 aluminum with an anodized finish. They are available in a range of sizes from 1/8” to six inches and 3mm to 150mm.
One of the main benefits of Clamp style shaft collars is their versatility. The collars can be used as guides, spacers, or stops on a variety of medical equipment. They are designed to distribute compression forces around a shaft, and they can be added at any stage in the manufacturing process.
Shaft Collar

Set screw shaft collars

Set screw shaft collars are used to secure screws to shafts. They can be purchased in a variety of sizes. The external diameter, internal diameter, and width of the collar will determine the proper collar size. Some companies also offer custom and adjustable-width collars. Clamp-style shaft collars are easier to maintain, and distribute torque evenly across the shaft. They also offer twice the holding power of set screw collars.
Collars are available in metric and inch sizes. They are also available in zinc plated and black-oxide steel. In addition, they come in a variety of styles. Whether you’re looking for a custom collar, or something a little more conventional, you can find it with the help of an ISO-certified supplier.
Set screw shaft collars come in different sizes and materials. Socket collars, for example, are made of steel and have an inside diameter of 5/64″ to 1-1/8″. In addition, forged socket set screw shaft collars come in 3/16 to 4 in. They are also available with special hardware for connection to shafts.
Set screw shaft collars are commonly used on transmission and machinery. A set screw allows you to secure the collar in position by setting it into the correct position with a grub screw or a set screw. The set screw can then be adjusted with a screw driver and is a quick and easy solution for keeping a shaft in place.
Shaft Collar

Aluminum shaft collars

Aluminum shaft collars offer a number of advantages, ranging from their light weight to their corrosion resistance. Aluminum shaft collars are available in various styles and sizes, and can be plated with a variety of finishes. They are also available in lightweight styles for applications with tight space constraints. The most important factor when selecting a shaft collar is the material used to make it. Aluminum is lighter than steel and has a high strength to weight ratio. The choice of material should also depend on how much corrosion resistance is required. For example, if the shaft will be exposed to extreme environments, it is a better choice to use treated steel.
Another benefit to aluminum shaft collars is their ability to be custom-matched to the shaft. This feature helps to increase their aesthetics and branding potential. In addition, the ability to color-code components and switches can improve safety. This is especially useful in fail-safe applications. By incorporating color-coded collars, manufacturers can increase the safety of their products.
Another advantage of aluminum shaft collars is their strength. For instance, they can withstand higher torque levels than other types of shaft collars. They can be easily adjusted, and their two-piece design makes them easy to replace. Moreover, CZPT keeps the two-piece collars together during manufacturing, ensuring a perfect fit for the shaft. These collars also feature forged steel socket screws for enhanced holding power and torque capacity.
Single-piece shaft collars are also available in various styles. The set screw type has a perpendicular outer face. The set screw in these collars is used to engage the mating shaft. This type of shaft collar is a good choice for rotating assemblies.
Shaft Collar

Stainless steel shaft collars

The main function of a stainless steel shaft collar is to provide clamping force to a rotating shaft. This is achieved by a variety of methods. One of these is by bending or hammering. A shaft collar can also be made of aluminum or a combination of both. These options provide different advantages, which are described in this article.
Stainless steel shaft collars are available in different sizes, shapes, and materials. The diameter of the shaft collar may range from five-sixteenths to two-and-a-half inches. Some manufacturers produce the collars in different materials, including T304, T316, 416, and 17-4PH. Their products may also come in various shapes, such as angles, flats, structural shapes, and threaded rods.
One of the most important advantages of a stainless steel shaft collar is its strength and durability. A well-made collar can prevent wear and tear and provide excellent holding power. It also has many applications and is useful in many industries. Its application ranges from vertical conveyors to horizontal athletic equipment machinery, from agriculture to retail.
While there are numerous types of shaft collars, all three types have some common characteristics. Typically, steel shaft collars have high holding power and slim to average profiles. Heavy-duty collars have twice the holding power of low-profile collars and are used in heavy-duty construction and mining. Ultra Heavy-Duty shaft collars have the highest axial holding power and are made of steel. Shaft collars may be treated with zinc for corrosion resistance.
One manufacturer offers stainless steel shaft collars made of 303 stainless steel and other materials. It offers collars of various diameters from three-eighth to one-eighth inch. They are available in threaded, mounting, and heavy-duty styles, and are suitable for a wide range of applications, including the aerospace, energy, and medical industries.
China Douple Split Carbon Steel Shaft Collar     aluminum shaft collar	China Douple Split Carbon Steel Shaft Collar     aluminum shaft collar
editor by czh 2022-12-01

China Factory Custom High Quality Metal Hollow/Solid Aluminum Shaft Collar shaft collar clamp

Product Description

Product Description:
Hollow Shaft Collar:
(1).Material: Aluminum/Stainless steel
(2).Surface Finished: Anodize &Sandblasting/ Polish
(3).Process: CNC Milling and Turning
(4).Tolerance: ±0.02mm

Parts Information

Product Name Factory Custom High Quality Metal Hollow/Solid Aluminum Shaft Collar
Applicable Material Alunimum/stainless steel/titanium/brass/copper/POM/Telfon/PEEK  etc.
Surface finish Machine finish/anodized/ beadblasting/Plating/Polish/brush/heat treatment/Brushed/Zinc plating/Nickel Plating/PVD etc
Payment Terms 50% deposit before production and 50% balance before arranging to ship
High Tolerance ± 0.02mm or accoriding to your requirment
Quality control Checking is during production process, after surface and before packing
Lead time  10-15 days for sample,15-25 days for bulk order depends on your design
Package Standard package/ Pallet or container/ as per customized specifications
Shipment Express & air freight is preferred / sea freight/ as per customized specifications

Our Business: 

1.CNC Turning Part 2.CNC Milling Parts
3.Camera head ball/Filter Ring/Stripod 4.Metal Pen body
5.Aluminum Extrusion Mold 6.Punch/Stamping/Welding/Forging/Bending
7.Medical Aluminum parts 8. Injection molding
9.Decorate Car part 10. Aluminum housing
11.Stainless steel/Aluminum shaft 12.LED Aluminum parts
13. Hard/Normal anodizing 14.Laser engraving

  
Company Information:
LCH was found in 2003, with a total investment of $1.5 million, over 4,500 square meters, equipped with the most advanced high precision 5Axis Precision Automatic Lather machine (8 sets), CNC Milling machine (23sets), CNC Turning machine (26sets),CNC machining center, automatic lathe and various kinds of secondary processing equipment more than 80 sets.

1. Work Shop:

2. Products We made:

                             We can custom the parts for you according to your drawing or samples

3. Quality Control

4. Package

5. Clients and comments

What can we do for you?
1. Professional, Competitive price and Fast delivery time
We engaged in this area for almost 11yeas, experience engineer can help you process the project well and perfect, also we own our factory that we can control the cost and delivery time very well. We can try best to meet your request.
2. Protect our customer profit well
Even we have very strictly quality control system, but we still can`t promise every part you received will 100% perfect, so if there is any defective parts you received, you just need to offer us the evidence(such as picture),we will check and confirm it. After that, we will repair or redo them.
Because of our strictly quality control system, we have confidence to promise our customer with this. Please kindly noted that it`s our advantage compared with others, we realize that only the high quality and good service can we keep friendly and long-term business relationship with our customer and it`s also the only way for an enterprise to be existed…
  
FAQ:

1.    Can you sent the product drawing to me? 
Pictures on website was just for reference, More correct information and some special requirements, 
Please kindly contact us.
2. Can you make OEM order?
Yes, OEM/ODM orders are welcome. You are warmly welcome to send the your designs to us, We will offer you reasonable prices with high quality
Please provide us the drawings or please tell us the detailed information what you need, we can copy the parts according to your information.
3. What kind of files do you accept?
PDF, DXF, ISG, STEP, X-T, High Resolution IPJ.
4. How long can I expect to get the sample? 
Samples will be ready for delivery in 5-15 days after we confirmed the shop drawings, The samples will be sent to you via express and arrive in 3-5 days.
 5. What about the lead time for mass production? 
Honestly, normally it is 15-30 days, and it depends on the order quantity and the season you place the order.  Generally speaking, (if you project is urgent, we can help you short it), we suggest that you start inquiry 1 months before the date you would like to get the products at your country. 
6. What are your terms of delivery? 
We accept EXW, FOB, CNF, etc. You can choose the most convenient one. Regarding to the shipping cost, if you have your own express account that will be welcome.

 
 

Application: Fastener, Hardware Tool, Machinery Accessory
Standard: GB, EN, API650, ASME, Titanium
Surface Treatment: Anodizing
Production Type: Mass Production
Machining Method: CNC Turning
Material: Nylon, Steel, Plastic, Brass, Alloy, Copper, Aluminum, Iron, Titanium

###

Samples:
US$ 52/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Product Name Factory Custom High Quality Metal Hollow/Solid Aluminum Shaft Collar
Applicable Material Alunimum/stainless steel/titanium/brass/copper/POM/Telfon/PEEK  etc.
Surface finish Machine finish/anodized/ beadblasting/Plating/Polish/brush/heat treatment/Brushed/Zinc plating/Nickel Plating/PVD etc
Payment Terms 50% deposit before production and 50% balance before arranging to ship
High Tolerance ± 0.02mm or accoriding to your requirment
Quality control Checking is during production process, after surface and before packing
Lead time  10-15 days for sample,15-25 days for bulk order depends on your design
Package Standard package/ Pallet or container/ as per customized specifications
Shipment Express & air freight is preferred / sea freight/ as per customized specifications

###

1.CNC Turning Part 2.CNC Milling Parts
3.Camera head ball/Filter Ring/Stripod 4.Metal Pen body
5.Aluminum Extrusion Mold 6.Punch/Stamping/Welding/Forging/Bending
7.Medical Aluminum parts 8. Injection molding
9.Decorate Car part 10. Aluminum housing
11.Stainless steel/Aluminum shaft 12.LED Aluminum parts
13. Hard/Normal anodizing 14.Laser engraving

###

1.    Can you sent the product drawing to me? 
Pictures on website was just for reference, More correct information and some special requirements, 
Please kindly contact us.
2. Can you make OEM order?
Yes, OEM/ODM orders are welcome. You are warmly welcome to send the your designs to us, We will offer you reasonable prices with high quality
Please provide us the drawings or please tell us the detailed information what you need, we can copy the parts according to your information.
3. What kind of files do you accept?
PDF, DXF, ISG, STEP, X-T, High Resolution IPJ.
4. How long can I expect to get the sample? 
Samples will be ready for delivery in 5-15 days after we confirmed the shop drawings, The samples will be sent to you via express and arrive in 3-5 days.
 5. What about the lead time for mass production? 
Honestly, normally it is 15-30 days, and it depends on the order quantity and the season you place the order.  Generally speaking, (if you project is urgent, we can help you short it), we suggest that you start inquiry one months before the date you would like to get the products at your country. 
6. What are your terms of delivery? 
We accept EXW, FOB, CNF, etc. You can choose the most convenient one. Regarding to the shipping cost, if you have your own express account that will be welcome.
Application: Fastener, Hardware Tool, Machinery Accessory
Standard: GB, EN, API650, ASME, Titanium
Surface Treatment: Anodizing
Production Type: Mass Production
Machining Method: CNC Turning
Material: Nylon, Steel, Plastic, Brass, Alloy, Copper, Aluminum, Iron, Titanium

###

Samples:
US$ 52/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Product Name Factory Custom High Quality Metal Hollow/Solid Aluminum Shaft Collar
Applicable Material Alunimum/stainless steel/titanium/brass/copper/POM/Telfon/PEEK  etc.
Surface finish Machine finish/anodized/ beadblasting/Plating/Polish/brush/heat treatment/Brushed/Zinc plating/Nickel Plating/PVD etc
Payment Terms 50% deposit before production and 50% balance before arranging to ship
High Tolerance ± 0.02mm or accoriding to your requirment
Quality control Checking is during production process, after surface and before packing
Lead time  10-15 days for sample,15-25 days for bulk order depends on your design
Package Standard package/ Pallet or container/ as per customized specifications
Shipment Express & air freight is preferred / sea freight/ as per customized specifications

###

1.CNC Turning Part 2.CNC Milling Parts
3.Camera head ball/Filter Ring/Stripod 4.Metal Pen body
5.Aluminum Extrusion Mold 6.Punch/Stamping/Welding/Forging/Bending
7.Medical Aluminum parts 8. Injection molding
9.Decorate Car part 10. Aluminum housing
11.Stainless steel/Aluminum shaft 12.LED Aluminum parts
13. Hard/Normal anodizing 14.Laser engraving

###

1.    Can you sent the product drawing to me? 
Pictures on website was just for reference, More correct information and some special requirements, 
Please kindly contact us.
2. Can you make OEM order?
Yes, OEM/ODM orders are welcome. You are warmly welcome to send the your designs to us, We will offer you reasonable prices with high quality
Please provide us the drawings or please tell us the detailed information what you need, we can copy the parts according to your information.
3. What kind of files do you accept?
PDF, DXF, ISG, STEP, X-T, High Resolution IPJ.
4. How long can I expect to get the sample? 
Samples will be ready for delivery in 5-15 days after we confirmed the shop drawings, The samples will be sent to you via express and arrive in 3-5 days.
 5. What about the lead time for mass production? 
Honestly, normally it is 15-30 days, and it depends on the order quantity and the season you place the order.  Generally speaking, (if you project is urgent, we can help you short it), we suggest that you start inquiry one months before the date you would like to get the products at your country. 
6. What are your terms of delivery? 
We accept EXW, FOB, CNF, etc. You can choose the most convenient one. Regarding to the shipping cost, if you have your own express account that will be welcome.

Types of Shaft Collars

Quick-clamp shaft collars

Quick-clamp shaft collars are a convenient option for tightening and loosening shafts. Unlike traditional bolts, quick clamps do not require any tools to install and adjust them. These collars come with flush handles and are designed to reduce production downtime. They also feature high-strength tension adjustment screws for compatibility with a wider range of shaft tolerances.
Quick-clamp shaft collars are offered in a variety of styles. CZPT, for example, offers a unique style of quick-clamp shaft collars with an integral lever. This lever sits flush against the outside diameter and is finger actuated. In addition, this design includes a tension-adjustment screw that can be adjusted according to the application’s requirements. Another style of quick-clamp shaft collar is a one-piece clamping collar with an integrated handle. It is ideal for low-rpm applications, and is designed to be a quick and simple solution for frequent shaft changeovers.
Quick-clamp shaft collars have an adjustable locking force generated by an eccentric lever and are very easy to install. They are available in one and two-piece clamp-type styles, and come in more than thirty standard sizes. They are available with round, square, and threaded bores. Additionally, you can choose to have them painted or customized.
Shaft Collar

Single split shaft collars

Single split shaft collars are a common choice for new installations. They provide easy installation and disassembly, which helps to minimize labor and downtime. They are also designed with full seating torque of the set screws, which evenly distributes forces throughout the shaft circumference. As a result, they provide greater holding power.
These shaft collars are available in various materials. They are typically made from different types of steel, including stainless steel and aluminium steel. They can also be made from nylon. The latter is available with different finishes, including black oxide. These are also available in custom sizes. These shaft collars are made to fit specific applications.
Single split shaft collars are available in a variety of sizes to fit a wide range of shaft diameters, from 1/8″ to 4 15/16″. The material used for the shaft should be softer than the material used for the set screw. They are marked with the bore size and are available in non-plated, chrome-plated, and black oxide coated materials.
Heavy-duty shaft collars are designed to hold a large amount of torque. They are available in two-piece clamp and one-piece clamp styles and offer up to 25 percent more holding force than standard collars. They are also available in a variety of materials, including proprietary black oxide finish, 1215 lead-free steel, 303 stainless steel, and high-strength 2024 aluminum.
Single split shaft collars are generally easy to install and remove. The design of these collars allows the shaft to fit into it evenly, which improves holding power. They also eliminate the need to remove or disassemble other components of the shaft. Additionally, they are easy to adjust and can work with virtually any shaft.
Single split shaft collars come in two-piece and one-piece styles. One-piece shaft collars are simpler to install and do not damage the shaft. Clamp-style collars are easy to use and do not require tools. They are designed to be hand-adjustable. These collars are recommended for light-duty applications. They are available in a wide range of threaded bore sizes. They also come in various styles, including ring-style and set-screw collars.
Shaft Collar

Set-screw shaft collars

Set-screw shaft collars are made of different materials, including steel, aluminum, and zinc plated steel. They are available in various widths and sizes. They can be used in aerospace, defense, and construction applications. Some types are standard, while others are custom-made.
A shaft collar has three primary functions: it holds a component in place, locates the component on a shaft, and creates an attachment between the shaft and another component. The design of a shaft collar depends on several factors, including the material, diameter, and geometry of the shaft.
One of the most common uses of shaft collars is to secure bearings and sprockets to shafts. In some cases, they also act as mechanical stops. For example, a two-piece clamp collar will wrap around the shaft without leaving any marks, while a set-screw collar will lock onto a shaft with a set screw. These types of collars can be used on predrilled and soft shafts.
Another advantage of set screw shaft collars is that they can be manufactured in a lightweight style for space-constrained applications. Another benefit is their ability to hold twice as much load as standard shaft collars. These collars are also available with a keyway, which makes them suitable for shafts with a key.
Another advantage of set-screw shaft collars is their safety. They were invented in the recessed socket screw industry and have become an industry standard. They prevent the shaft from sliding and causing a flanged bearing to come out. They are easy to install and remove, and they are ideal for light-duty applications.
Clamp style shaft collars are also available in one-piece and two-piece designs. This type of collar is unique in that it can be removed without damaging the shaft. They are also adjustable and can fit virtually any shaft. Their clamping force is evenly distributed around the shaft, so they are significantly safer than set screw collars, which use point-contact clamps.
Shaft Collar

Hinge shaft collars

The International series is a two-piece shaft collar with metric outer diameters, metric widths, and inch bores. These collars are suitable for many different types of applications, and are available in a variety of materials and bore sizes. They are available in 1215 lead-free steel with black oxide finish, high strength 2024 aluminum, and 303 stainless steel.
Custom Hinged Shaft Collars are a great choice for applications requiring quick and easy adjustment, especially in remote locations. They are available in a variety of materials, including steel, stainless steel, aluminum, and brass. You can even get custom-made collars for unusually shaped shafts.
Hinge shaft collars are similar to two-piece shaft collars in many ways. They allow easy disassembly and reassembly along the shaft and are usually the preferred choice in harsh environments. Hinge shaft collars have a simple design, allowing them to be installed quickly and easily. They also provide superior holding power. If you’re considering a hinge shaft collar for your application, it is important to consider how it will be used.
Hinge shaft collars serve as precise stops and spacers for different laboratory equipment. They can also be used on plastic, glass, and thin-walled tubes. They are often used in medical equipment, where the need for accuracy is paramount. They also serve as guides in optical measuring instruments. They are also useful in trucks and off-road vehicles, where they serve as mechanical stops.
Hinge shaft collars can be purchased in two-piece or one-piece designs. They can be adjusted using a single screw or lever. They can be installed and removed without causing any damage to the shaft. Unlike set screw collars, they don’t require tools. This makes them ideal for applications where access to the shaft is difficult or impossible. The advantages of these collars include improved safety and security.
China Factory Custom High Quality Metal Hollow/Solid Aluminum Shaft Collar     shaft collar clampChina Factory Custom High Quality Metal Hollow/Solid Aluminum Shaft Collar     shaft collar clamp
editor by czh 2022-11-28

China Metric Set Screw Aluminum Shaft Locking Collar and Shaft Mounting Collar split shaft collar

Product Description

Metric Set Screw Aluminum Shaft Locking Collar and shaft mounting collar

Product Name Shaft collar
Material stainless steel, C45
Weight 13-620g
Bore 1/2 in- 5 1/4 in
Item hub and plate
Type Set Screw/ single split / double split
packing plastic bag +paper box +wooden box +wooden pallet

 

1. Engineering: machine tools, foundry equipments, conveyors, compressors, painting systems, etc.

2. Pharmaceuticals& Food Processing: pulp mill blowers, conveyor in warehouse, agitators, grain, boiler, bakery machine, labeling machine, robots, etc.

3. Agriculture Industries: cultivator, rice winnower tractor, harvester, rice planter, farm equipment, etc.

4. Texitile Mills: looms, spinning, wrappers, high-speed auto looms, processing machine, twister, carding machine, ruler calendar machine, high speed winder, etc.

5. Printing Machinery: newspaper press, rotary machine, screen printer machine, linotype machine offset printer, etc.

6. Paper Industries: chipper roll grinder, cut off saw, edgers, flotation cell and chips saws, etc.

7. Building Construction Machinery: buffers, elevator floor polisher mixing machine, vibrator, hoists, crusher, etc.

8. Office Equipments: typewriter, plotters, camera, money drive, money sorting machine, data storage equipment, etc.

9. Glass and Plastic Industries: conveyor, carton sealers, grinders, creeper paper manufacturing machine, lintec backing, etc.

10. Home Appliances: vacuum cleaner, laundry machine, icecream machine, sewing machine, kitchen equipments, etc.

 We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit.To supply customers excellent quality products with good price and punctual delivery time is our responsibility.

Standard Or Nonstandard: Standard
Shaft Hole: 19-32
Torque: >80N.M
Bore Diameter: 19mm
Speed: 4000r/M
Structure: Tyre Coupling

###

Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Product Name Shaft collar
Material stainless steel, C45
Weight 13-620g
Bore 1/2 in- 5 1/4 in
Item hub and plate
Type Set Screw/ single split / double split
packing plastic bag +paper box +wooden box +wooden pallet
Standard Or Nonstandard: Standard
Shaft Hole: 19-32
Torque: >80N.M
Bore Diameter: 19mm
Speed: 4000r/M
Structure: Tyre Coupling

###

Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Product Name Shaft collar
Material stainless steel, C45
Weight 13-620g
Bore 1/2 in- 5 1/4 in
Item hub and plate
Type Set Screw/ single split / double split
packing plastic bag +paper box +wooden box +wooden pallet

Common Uses for the Shaft Collar

The shaft collar is a relatively simple machine component, but one of the most important in many power transmission applications. It is most often used in gearboxes and motors, where it serves as a locating component, bearing face, and mechanical stop. Its simple design allows for easy installation and makes it ideal for a range of applications. Listed below are some of the most common uses for the shaft collar. Learn more about this important machine component.

Single split

Two-piece shaft collars are an excellent option for applications where a single piece collar is not practical. They provide the same benefits as one-piece collars, but with more convenience when installing. The two-piece collar has a clamp style, which allows the collar to be adjusted with a hand tool. They are suitable for light-duty applications and come in a variety of diameters. In addition to shaft diameters, collars are available with different threaded bore sizes. Shaft diameters are usually measured in mm. They can be easily installed and disassembled by removing the cap screws from each side.
Single split shaft collars come with a machine screw that tightens the clamp around the shaft. This ensures a tight, secure fit and better holding power than solid collars. They are easy to install, remove, and adjust, and work on virtually all types of shafts. The machine screw helps to prevent the collar from ripping the shaft.
Shaft collars come in a variety of materials. Typical materials include stainless steel, alloyed steel, and nylon. They are also available in custom sizes. If you want a specific size, be sure to specify that when ordering. These collars are made of quality materials, and they will hold up to the most rigorous applications.
Heavy duty shaft collars are manufactured from higher-grade materials than standard collars. They have a larger outer diameter, wider flange, and a larger screw for increased holding power. These collars are typically used in short-term, rigid coupling applications, and they are available in one-piece and two-piece clamp styles. These collars are typically made from 1215 lead-free steel or 303 stainless steel. Some of them can be finished with an anodized finish.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. There are three different styles of mountable shaft collars: flange collars, flat collars, and quick-release collars. The material used for shaft collars can be 1215 lead-free steel with a black oxide finish, high-strength aluminum, and 303 stainless steel.
Shaft Collar

Solid

A solid shaft collar is a shaft coupling that is used to connect two shafts. They can be made of a variety of materials, including steel, zinc plated, and stainless steel. In addition, they come with various finishing options, including a zinc plated or black oxide finish. In addition, they can be made to fit a variety of shaft sizes and types.
Shaft collars are a simple, yet essential part of machine design. They can be found in virtually any piece of machinery. They can serve a variety of functions, including holding bearings on shafts, positioning components within motor assemblies, and acting as mechanical stops. While they can serve a variety of functions, they are most commonly used as bearing faces, mechanical stops, and locating components. They are also easy to install and tighten, making them a popular choice for a variety of different applications.
Solid shaft collars are available in two types: one-piece and two-piece. The two-piece collars are generally more rigid, offering better clamping force. However, they require more seating torque than the one-piece clamp collar. This is because there are more screws to tighten the two-piece collar than the single-piece collar.
One type of solid shaft collar is the set screw collar. Its holding power comes from the set screw, which is tightened onto the shaft. Ideally, the set screw should impinge on the shaft, and bite into it. The screw should be made of a softer material, as a harder material would reduce its holding power. However, the set screw collar can be adjusted by milling small flats into the shaft at the locations of the set screw.
A solid shaft collar is a simple machine component used in various power transmission applications. The most common places where it is used include motors, gearboxes, and bearings. Their simple design makes it easy to install and maintain. Unlike early versions, however, which were primarily made of square-headed set screws, modern shaft collars feature recessed set screws.
Shaft Collar

lamping-style

A Clamping-style shaft collar is an essential component of a gearbox or motor. Its high holding power allows it to hold components securely in place and ensure proper power transmission. These collars are also commonly used as spacers or to limit the movement of shafts during reciprocating motion.
These collars come in a variety of styles, including the double-split and semi-split varieties. They are ideal for repetitive positioning and are available in steel and stainless steel. They also feature a quick release element. And the index lever makes them easy to adjust or repair.
There are several different styles of shaft collars, including the Clamping-style shaft collar. The Clamping-style collar is one of the most commonly used in industrial settings. Its clamp is attached to the shaft by screws and has a hinge on one side. This feature eliminates the risk of the screws becoming dislodged while operating the machine.
Clamping-style shaft collars are generally made of steel or stainless steel. They can be made of aluminium, but this material has lower holding power. Stainless steel collars are a good choice for cleanroom environments because they do not outgas. They also require less maintenance. If you’re uncertain which style to choose, consult with a specialist in your field.
Clamping-style shaft collars are commonly used on industrial machinery and are an important part of gearbox maintenance. If you’re planning to install one, make sure you measure it carefully before you install it. If you don’t, you may damage the shaft or endcap. And while you’re at it, be sure to check for any kinks before you use it.
Shaft Collar

Set screw

Set screw shaft collars are the most cost-effective type of shaft collar. Available in bore sizes ranging from 3/16″ to 4″, they offer increased holding power and torque capacity. Additionally, they come with a keyway in case the shafts are keyed. Commercially produced shaft collars are non-magnetic and made of 303 stainless steel. They also come with one set screw per collar.
Shaft collars can be made of aluminum, steel, or a combination of steel. They serve multiple purposes including mechanical stops and stroke limiters, and can be adjusted for the correct fit. They are easy to install and remove, and they provide high clamping power. Custom designs are also available. They can be made of different materials to suit your specific needs.
Set screw for shaft collars are commonly used in transmission and machinery applications. Set screw shaft collars can be adjusted using a screw driver. When tightened, the set screw bites into the shaft material and holds it in place. When used properly, they can reduce the amount of torque required to hold components in place.
Shaft collars come in a variety of sizes. In general, shaft collars can range from 5/64″ to one inch in diameter. In addition, you can choose between metric and inch-sized shaft collars. When choosing a shaft collar, it is important to consider the size and bore diameter of the shaft.
China Metric Set Screw Aluminum Shaft Locking Collar and Shaft Mounting Collar     split shaft collarChina Metric Set Screw Aluminum Shaft Locking Collar and Shaft Mounting Collar     split shaft collar
editor by czh 2022-11-25

China Stainless Carbon Steel Copper Aluminum Alloy Titanium Shaft Collar shaft collar axial load

Product Description

       Jingbang manufactures shaft collars in multiple styles to fit shafts ranging from 1/8″ to 6″ and 3mm to 150mm. They are made from select qualified bar stock in 303 & 316 stainless steel, black oxide and zinc plated carbon steel, high-strength aluminum, and engineered plastic. Our shaft collars have precisely controlled face to bore perpendicularity (identified by the grooved face) TIR ≤ .002″ (.05mm) with tighter tolerances on bearing locknuts. Perpendicularity is critical for alignment when a shaft collar is used as a load-bearing face, mechanical stop, or for mounting components. And we can also engrave the LOGO according to customer requirements

 

Product Name Shaft Collar Clamp/Collars Shaft
Size 1/8″ to 6″ and 3mm to 150mm. or non-standard according to your requirements.
Accept Material AISI 303/304/316L, SUS 303/304/316, Aluminum 6061/6063/7075/2571, Brass/Bronze, Titanium etc.

Accept 

Finish

Machining, Plain, Polishing, Zinc- Plated, Black Oxide, Anodizing, Passivation, Galvanized nickel-alloy plated, Powder Coating, etc, as per your requirements.
Type One-piece, Two-piece, Threaded, Shaft coupling, Heavy-duty, Mountable, Quick Clamping, Hex& D- Bore, Set screw
Standard Metric, imperial
Packing Service We generally packing fasteners to prevent them from colliding with each other during transportation to produce scratches and surface plating, also accept customization.
Sample Service Free samples will be sent to you after confirming the order, and we will charge a sample fee for some products with high value.

We have stock of the following products, please contact us for the price!
  ONE-PIECE: Carbon steel and black oxide

 

Bore size:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  TWO-PIECES: Carbon steel and black oxide

Bore size:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  SET-SCREW: Carbon steel and black oxide

Bore size:

 

8mm,10mm,13mm

CUSTOM DESIGNS

As a service to our customers, we offer our vast manufacturing experience and talents to meet special needs with custom parts. Our in-house engineering team has extensive experience designing and custom engineering solutions to meet your requirements. If you do not see what you are looking for in our standard line, please inquire about custom options.

 

Materials & Finishs

 

Related catalog

  • We also offer other products click here

        Washers          Stamping

Packaging & Shipping

We can also purchase and complete packaging according to customer requirements, such as blister boxes, rustproof paper, pearl cotton packaging, and we promise not to make a penny on extra packaging.

Production Process

 

Our Advantages

Company Profile

FAQ

1, How to ensure split Shaft Collar Clamp/Collars Shaft every process’s quality?
Shaft Collar Clamp / Collars Shaft Every process will be checked by our quality inspection department which insures every product’s quality. In the production of products, we will personally go to the factory to check the quality of shaft collar.
2, Shaft Collar Clamp/ Collars Shaft delivery time?
For Shaft Collar Clamp / Collars Shaft we have stock, within 15 days; If customized, according to your quantity, about 20-25days.
3, What is your payment method?
Paypal, Alibaba, 30% value of T/T in advance and other 70% balance before shipping. For small order less than1000USD, would suggest you pay 100% in advance to reduce the bank charges.
4, Can you provide Shaft Collar Clamp / Collars Shaft sample?
Sure, for stocked Shaft Collar Clamp/ Collars Shaft, we will provide free Shaft Collar Clamp / Collars Shaftsamples and you will be charged for shipping. 

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Standard: DIN, ANSI, GB, JIS, BSW
Material: Carbon Steel, Stainless Steel,Al6061
Connection: Standard or Customized

###

Samples:
US$ 2/Piece
1 Piece(Min.Order)

|

Order Sample

On request

###

Customization:

###

Product Name Shaft Collar Clamp/Collars Shaft
Size 1/8" to 6" and 3mm to 150mm. or non-standard according to your requirements.
Accept Material AISI 303/304/316L, SUS 303/304/316, Aluminum 6061/6063/7075/2024, Brass/Bronze, Titanium etc.

Accept 

Finish

Machining, Plain, Polishing, Zinc- Plated, Black Oxide, Anodizing, Passivation, Galvanized nickel-alloy plated, Powder Coating, etc, as per your requirements.
Type One-piece, Two-piece, Threaded, Shaft coupling, Heavy-duty, Mountable, Quick Clamping, Hex& D- Bore, Set screw
Standard Metric, imperial
Packing Service We generally packing fasteners to prevent them from colliding with each other during transportation to produce scratches and surface plating, also accept customization.
Sample Service Free samples will be sent to you after confirming the order, and we will charge a sample fee for some products with high value.

###

We have stock of the following products, please contact us for the price!
  ONE-PIECE: Carbon steel and black oxide

 

Bore size:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  TWO-PIECES: Carbon steel and black oxide

Bore size:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  SET-SCREW: Carbon steel and black oxide

Bore size:

 

8mm,10mm,13mm

###

1, How to ensure split Shaft Collar Clamp/Collars Shaft every process’s quality?
Shaft Collar Clamp / Collars Shaft Every process will be checked by our quality inspection department which insures every product’s quality. In the production of products, we will personally go to the factory to check the quality of shaft collar.
2, Shaft Collar Clamp/ Collars Shaft delivery time?
For Shaft Collar Clamp / Collars Shaft we have stock, within 15 days; If customized, according to your quantity, about 20-25days.
3, What is your payment method?
Paypal, Alibaba, 30% value of T/T in advance and other 70% balance before shipping. For small order less than1000USD, would suggest you pay 100% in advance to reduce the bank charges.
4, Can you provide Shaft Collar Clamp / Collars Shaft sample?
Sure, for stocked Shaft Collar Clamp/ Collars Shaft, we will provide free Shaft Collar Clamp / Collars Shaftsamples and you will be charged for shipping. 
Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Standard: DIN, ANSI, GB, JIS, BSW
Material: Carbon Steel, Stainless Steel,Al6061
Connection: Standard or Customized

###

Samples:
US$ 2/Piece
1 Piece(Min.Order)

|

Order Sample

On request

###

Customization:

###

Product Name Shaft Collar Clamp/Collars Shaft
Size 1/8" to 6" and 3mm to 150mm. or non-standard according to your requirements.
Accept Material AISI 303/304/316L, SUS 303/304/316, Aluminum 6061/6063/7075/2024, Brass/Bronze, Titanium etc.

Accept 

Finish

Machining, Plain, Polishing, Zinc- Plated, Black Oxide, Anodizing, Passivation, Galvanized nickel-alloy plated, Powder Coating, etc, as per your requirements.
Type One-piece, Two-piece, Threaded, Shaft coupling, Heavy-duty, Mountable, Quick Clamping, Hex& D- Bore, Set screw
Standard Metric, imperial
Packing Service We generally packing fasteners to prevent them from colliding with each other during transportation to produce scratches and surface plating, also accept customization.
Sample Service Free samples will be sent to you after confirming the order, and we will charge a sample fee for some products with high value.

###

We have stock of the following products, please contact us for the price!
  ONE-PIECE: Carbon steel and black oxide

 

Bore size:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  TWO-PIECES: Carbon steel and black oxide

Bore size:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  SET-SCREW: Carbon steel and black oxide

Bore size:

 

8mm,10mm,13mm

###

1, How to ensure split Shaft Collar Clamp/Collars Shaft every process’s quality?
Shaft Collar Clamp / Collars Shaft Every process will be checked by our quality inspection department which insures every product’s quality. In the production of products, we will personally go to the factory to check the quality of shaft collar.
2, Shaft Collar Clamp/ Collars Shaft delivery time?
For Shaft Collar Clamp / Collars Shaft we have stock, within 15 days; If customized, according to your quantity, about 20-25days.
3, What is your payment method?
Paypal, Alibaba, 30% value of T/T in advance and other 70% balance before shipping. For small order less than1000USD, would suggest you pay 100% in advance to reduce the bank charges.
4, Can you provide Shaft Collar Clamp / Collars Shaft sample?
Sure, for stocked Shaft Collar Clamp/ Collars Shaft, we will provide free Shaft Collar Clamp / Collars Shaftsamples and you will be charged for shipping. 

Types of Shaft Collars

A shaft collar is a simple machine component that plays a critical role in power transmission. It is typically found in gearboxes and motors, and serves as a bearing face, mechanical stop, and locating component. Its simple design makes it easy to install and use. Its various functions make it a useful machine part for many applications.
Shaft Collar

Set screw shaft collars

Set screw shaft collars are used in many different applications and can be manufactured in a variety of materials. Typical materials include carbon steel, stainless steel, platinum, silver, nylon, polysulphone, PTFE, and PVC. Collars are easy to install and adjust. A variety of secondary services are available, including internal forming, chroming, and passivating.
Set screw shaft collars come in different styles, including standard collars, quick-release collars, split collars, and threaded collars. They can be purchased in standard and metric sizes, and are available in a variety of finishes. Standard collars are available in steel and stainless steel and have a zinc plated or black oxide finish.
Set screw shaft collars are an excellent choice for holding power transmission components in place and limiting shaft movement. They are held in place by a set screw that digs into the shaft material, providing holding power. They are available in both 303 and 316 Stainless Steel, making them a reliable and efficient choice for a variety of applications.

Clamping-style shaft collars

Clamp-style shaft collars are a versatile alternative to set-screw collars. They eliminate the problems associated with the set-screw collar, such as the possibility of shaft damage. They also lock in place by compressing against the shaft. This method distributes the force on the collar and shaft evenly, creating a stronger holding power.
Shaft collars are manufactured by many companies. You can buy them in-store or online, but it is important to buy from a reputable manufacturer. Many counterfeit collars endanger the life of your machine. Choosing a quality collar will help you avoid costly and time-consuming machine breakdowns.
Clamping-style shaft collars come in a variety of sizes and types. Some of them have a hex or D-bore. Some have circular grooves to assist with installation. They can be found in bore sizes from 1/4″ to one inch. They are often used for mounting gears, sprockets, and bearings.
Two-piece clamp collars are an excellent choice for high-load applications. They have improved clamping force and impressive holding power, and can be easily installed without major disassembly. Two-piece clamp collars can also be designed with a keyway to secure a keyed shaft. There are also special double-wide clamp collars for high axial load applications.
Another type of shaft collar is the quick clamping collar. It is an excellent choice for applications where you want to make frequent setup and adjustments. It allows for easy adjustments with minimal tools. Quick clamping collars feature a cam lever and a clamping lever. They are convenient and highly flexible, making them ideal for use in many industries.
Shaft Collar

Single split shaft collars

A single split shaft collar is designed to fit one shaft and eliminate two pieces. This makes installation and disassembly easy, reducing labor and downtime. It also uses a full seating torque of the set screws to distribute forces evenly around the shaft circumference, providing stronger holding power. It can be used on a wide range of rotating equipment.
Single split shaft collars are available from CZPT Products. They are a common, high-quality way to secure a shaft. They wrap around the shaft for a secure and tight fit. They are also a versatile option that can be easily removed. These collars can be used on both hard and soft standard round shafts. They provide superior grip compared to solid collars, provide tremendous axial force, and minimize shaft distortion.
Single split shaft collars are one of the many types of bearing shaft locking collars. They are made of EN8 steel, and come with a locking setscrew. This makes installing the collar quick and easy. The collar is available in many sizes, including small, medium, and large. If you do not find the right fit, you can also have one custom-made.
These collars are commonly used for mounting fixtures, sensors, and other assemblies. They are available in two-piece and one-piece styles, and have higher holding power than standard shaft collars. They are available in a wide range of materials, including 1215 lead-free steel, 303 stainless steel, and lightweight 2024 aluminum.

Aluminum shaft collars

The CZPT company produces Aluminum shaft collars for a variety of applications. These shaft collars feature a proprietary manufacturing process to ensure accurate face-to-bore perpendicularity. This helps to improve clamping forces and installation fit. Each collar features the CZPT name stamped on it, and the collar is finished with a black oxide process to achieve a fine glossy finish. The shaft collars are available in a variety of bore sizes and styles, and can be ordered in single or two-piece styles. Additionally, they are manufactured with a high-grade forged screw, which ensures the highest quality.
Aluminum shaft collars can be customized to fit your needs. Several accessories can be added to the shaft collar, such as steel mending plates. Those who need extra load capacity can select a keyed shaft collar. They are also available in lightweight styles. These shaft collars are easy to install and disassemble, and are made from two-piece aluminum for ease of installation.
Choosing the right shaft collar material is critical to the success of your application. You should consider steel, stainless steel, or aluminum for the best corrosion resistance. Steel is stronger and offers better holding power, while aluminum offers a lower weight and a favorable strength-to-weight ratio. When selecting shaft collars, it is important to take into consideration the corrosion resistance of each material. For example, carbon steel shaft collars will not be as corrosion resistant as aluminum shaft collars, but they are lighter and have a good hold power.
Shaft Collar

Carbon steel shaft collars

Carbon steel shaft collars are a versatile solution to holding bearings in place. They are available in a range of diameters and styles to meet your application needs. They can be used for many different applications, from aerospace and military applications to marine and automotive applications. These collars are available in a variety of materials, including carbon steel, aluminum, and stainless steel.
Carbon steel shaft collars are a cost-effective alternative to stainless steel shaft collars. CZPT manufactures lead-free carbon steel shaft collars, and they are also available with RoHS-compliant yellow zinc plating. Zinc plating is less expensive than stainless steel and is an excellent anti-corrosive option. CZPT yellow zinc collars are plated by a trivalent process rather than a non-compliant hexavalent process.
Shaft collars are available in both metric and inch bore sizes. They can be used for a variety of applications and are typically available in sizes ranging from 1/4″ to three inches. They are also available with metric screws in a range of sizes, which are useful for retrofitting equipment.
Shaft collars are available in a variety of materials, including carbon steel, 303 stainless steel, and aluminum. Some options feature threads and can be welded or bolted to shafts. For more advanced applications, aluminum threaded shaft collars can be used. They are often used for mounting sensors, fixtures, and other assemblies. They come in several styles, such as double-wide, heavy-duty, and threaded.

Hinge shaft collars

Hinge shaft collars are fastening devices that secure shafts or axles. They come in a wide range of sizes, shapes, and materials. These collars can be used in a wide range of applications, including non-rotary applications. They can be manufactured in stainless steel, 1018 steel, aluminum, and brass.
Shaft collars are simple to use but can perform a variety of functions. Their primary functions include holding components in place, locating components on a shaft, and establishing attachment between the shaft and another component. To choose the right collars for a specific application, designers should consider the design, style, materials, bore size, and geometry of the shaft. They should also consider any limitations or requirements associated with the application.
Hinge shaft collars are available in round and square bores. They are most commonly used in agricultural applications. Their size makes them easy to install, and their design makes them suitable for both large and small shafts. They are also used in situations where shafts are not easily accessible. Some types of shaft collars feature flat surfaces, which are great for mounting applications and splitting hubs.
Heavy duty shaft collars are also available. These collars have larger outer diameters, wider bores, and larger screw diameters. They are manufactured from lead-free steel with a proprietary black oxide finish.
China Stainless Carbon Steel Copper Aluminum Alloy Titanium Shaft Collar     shaft collar axial loadChina Stainless Carbon Steel Copper Aluminum Alloy Titanium Shaft Collar     shaft collar axial load
editor by czh 2022-11-24

China Metric Set Screw Aluminum Shaft Locking Collar and shaft mounting collar shaft collar aluminium

Structure: Eccentric
Material: Steel/stainless steel/ aluminum …, Steel/stainless steel/ aluminum …
Coatings: Black Oxide
Torque Capacity: 0-10000nm
Length: Customers’ Request
Model Number: M3*4
Standard: Custom Part
Product name: shaft collar
Size: M3*4
Type: Machining Services
Certification: ISO9001:2008
Application: Corner Bracket
Color: Black, silver, golden…
Tolerance: 0.005 – +/- 0.02
MOQ: 50PCS
Packaging Details: Customized packaging considering the protection required by the product in Corrugated Boxes and Wooden Pallets
Port: ZheJiang


Metric Set Screw Aluminum Shaft Locking Collar and shaft mounting collar
Types of shaft collars:
Solid Setscrew shaft collar,Hex bore shaft collar,One Piece shaft collar,Two
Piece shaft collar,Threaded shaft collar,Single split shaft collar,Double split shaft collar
Our products can be made according to Climax,Holo-Krome,Stafford,Ruland etc.

Note of solid shaft collar:
1.Material:AL,Steel,Stainless steel,Alloy,Copper,Plastic
2.Finish: Black oxide, self-colour, oiled, zinc plated
3.Processes:Broaching/ Hobbing/ Slotting/tapping
4.Package:box/carton/wooden case
5.Lead time:20-35 days
6.ISO9001:2008 Certificated
Shaft collar:

Product Features:
1.Effective on hard and soft shafts
2.Cost effective collar design
3.Easily installed where major disassembly would otherwise be required Simply slide these collars CZPT a shaft and tighten the set screw to hold the collar in place.Collars are easy to adjust with their set screws.
shaft locking collars shaft locking collars shaft locking collars shaft locking collars
shaft locking collars

Packaging & Shipping Package: Standard suitable package / Pallet or container Polybag inside export carton outside, blister and Tape and reel package available.
If customers have specific requirements for the packaging, we will gladly accommodate
Shipping: 10-20working days ofter payment receipt comfirmed (based on actual quantity) Packing standard export packing or according to customers demand
Professional goods shipping forwarde

About MIGHTY

factory show

Mighty advantages:

1,More competitive prices,2,Shorter delivery date: 35 days.
3,We are the professional manufacturer in the field of Power Trans.Parts,specially for Timing Pulleys.
4,Produce standard and non-standard5,Strict QC Management:ISO9001:2008,our engineer,Mr.Wang has specialized in the prodcution for over 20 years.

Exhibition

FAQQ: How long can I get reply after send inquiry?
A: All inquiries will be replied within 12 hours, also you may call us at any time. Q: How soon can I get sample ?
A: Generally standard sample can be send out within 7days, and for the customize parts, it will depond on the detail requirment. Q:What information should I give to you for inquiry?
A:Pls send the detail of the specification and QTY, also specail demands etc, and it’s better you can send us the detail drawings or catalogue.
Q: If I don’t have drawing or catalogue, how can I get sample ?
A:If you don’t have the drawing or catalogue, you can send us your sample, so we can make the drawing and sample accordingly.Q:What is the Warranty for your products?
A:Normally our warranty is 1 year.
Any question or inquiry, pls contact us without hesitate, we’ll try our best to help you!

Contact usWhat are your waiting for? fill out the inquiry form bellow and click send to us, Any question or inquiry, we will reply you within 12hours!

Shaft Collar

A shaft collar is a common machine component that provides mechanical support to shafts. It is found in motors and gearboxes and serves several important functions. Its design makes it an easy component to install. In addition to providing mechanical support to shafts, shaft collars can also serve as locating components and bearing faces.
Shaft Collar

Sizes

Shaft collars are complex components with several factors that determine their performance. Typical considerations include the style, materials used, bore size, and shaft geometry. Manufacturers typically have information on these factors on their websites. Users can also contact them for advice. These components are available in different sizes and types.
Shaft collars are available in a wide range of sizes, from 1/8 inch to six inches. They can also be re-bored if necessary. There are two main types of shaft collars. The basic one uses set screws, which may mar the shaft. The other type features a clamp screw and a hinge on one side. This eliminates the risk of losing screws.
The most common types of shaft collars are made from steel or aluminum. Plastic shaft collars are lightweight and inexpensive, but have reduced holding power. Steel shaft collars are more durable and hold their shape without bending. They also tend to be corrosion resistant. The steel grades used can have a big impact on their performance. For example, the 12L14 alloy is easier to machine, but does not do well in welding applications. Stainless steel shaft collars offer enhanced corrosion resistance, but reduced holding power. They are most commonly made from 304 stainless steel.
Shaft collars are an integral part of many mechanical systems. They are used to mount shafts onto flat surfaces and hold mechanical components in place. These accessories are available in a wide range of sizes and styles. Depending on the application, a shaft collar can be made to fit virtually any shaft.
The material used for shaft collars is also an important factor. The material of the shaft collar can make a big difference in the performance of the collar. The screw can be either flat or hex. The material will also determine the holding power. A screw with a hardened center will provide better holding power.
Another factor affecting the holding power of shaft collars is its surface treatment. The most common types are steel, black oxide, and zinc-plated. The latter is beneficial as it reduces the friction coefficient and enhances the holding power. Zinc-plated collars are better corrosion resistant than black oxide. However, the black oxide treatment is more effective because it prevents slippage.

Construction

Shaft collar construction involves the construction of a collar around an underground shaft. This structure consists of steel casing and concrete that extends below the surface of the ground. The concrete may be constructed using conventional or specialty cements. It may also contain accelerators and other additives to improve its holding strength. The concrete may also contain heavyweight or lightweight aggregates for optimal properties.
There are two main types of shaft collars. The double split collar is the most common type. It has a split design in the middle and is fastened using two allen head cap screws on each side. It has greater holding power than a solid collar, and the two-piece design makes it easier to install and replace. In addition, double split collars don’t require disassembling the entire shaft and its components.
There are many factors to consider when selecting a shaft collar. The material, holding power, and surface treatment of the shaft collar will affect its ability to withstand the load without slipping. These factors must match the specifications of the application in order to maximize its safety. A guide can help you choose the most appropriate shaft collar for your needs. The holding power of a shaft collar depends on the material used for construction and the screw size.
Shaft collars are used for a variety of applications that require a secure grip on mechanical components. They can be used on shafts, tubes, piping, and even flat surfaces. Only the highest quality collars are approved for use in industrial settings. These collars help ensure proper alignment of mechanical components and prevent any unnecessary movement. There are three different types of shaft collars. One type is a two-piece collar that is held together by two socket head screws.
Shaft collars may include an extended concrete pad at the surface. This concrete pad can support surface equipment and piping support assemblies. The shaft collar extends below temporary bracing material and within the retainment wall. The extended portion of the collar is then extended into the competent rock. From there, the collar transitions to a shaft lining assembly.
Shaft Collar

Functions

A shaft collar is a simple device that plays a critical role in a wide variety of industrial applications. Its primary functions are to hold components in place, locate components on the shaft, and form an attachment between a shaft and another component. In designing a shaft collar, a designer needs to consider several factors, including the material, bore size, and geometry of the shaft. It is also important to consider the specific requirements of the system.
Threaded collars are superior to smooth-bore collars in many ways. Threaded collars are more resistant to axial loads than smooth-bore collars, which rely on friction. Because the collar and shaft are threaded, they are practically impossible to move axially without breaking the shaft.
There are many types of shaft collars, each with their own unique properties. Each collar has different applications, and its performance must match the needs of the application. For many applications, holding power is paramount, while other performance factors include weldability, inertia, conductivity, corrosion resistance, and precision of collar-face relative to the bore.
While shaft collars may exert some holding force, they also exert other forces on the shaft. For example, they are ideal for splitting hubs, where they act as interfaces between various components. In addition, their close tolerances allow them to exert minimal force on the hub. This allows them to provide increased holding power while minimizing the force needed to close the hub.
Despite their simplicity, the shaft collar plays a crucial role in machine design. They hold components in place and provide necessary positioning for power transmission. Additionally, they are used as spacers in motor assemblies. And, they can also act as mechanical stops, limiting the movement of the shaft. You can find them in virtually any type of machinery.
Another type of shaft collar is the threaded collar, which can be axially or radially attached to the shaft. Its design has an internal thread that helps to precisely position it along the shaft. Internal threads also offer enhanced support for high axial loads. Internal threads also act as a positive mechanical stop.

Applications

Shaft collars are used in a variety of industrial applications. They serve as accurate stops and easy-to-adjust spacers. They can be used on glass, thin-wall tubing, and plastic. Other applications include optical measuring instruments and positioning systems for MRI machines. These collars are available in different sizes, materials, and styles.
The material used for shaft collars can have a significant impact on their performance. A collar’s holding power is also affected by the strength of its screw. Generally, a collar manufacturer will provide a screw that is compatible with the application. However, in some cases, it is necessary to use a nonstandard screw.
The clamp-style collar is reliable under constant loads, but it may need extra support when shock loads are present. In these situations, a small mass is impacted, and high forces are created. A positive stop can help a clamp-style collar stay in place during such shock loads. Alternatively, a collar undercut on a shaft can provide positive stops in both axial directions.
There are many different shaft collar designs and styles. Choose the right one for your application by considering your specifications. Different styles have different purposes, so consider the type and material that is right for your application. Some manufacturers offer a variety of different styles to choose from. You can visit their website or call their customer service representatives for assistance. This way, you can choose the best shaft collar for your specific needs. These collars are a very important part of many mechanical systems.
Clamp-style collars are an excellent choice when axial adjustment along the shaft is required frequently. These collars are easy to install and remove and do not mar the shaft. In addition, they provide excellent clamping force and impressive holding power. Quick-clamp collars are also a great choice for light-duty applications. They allow for fast and easy adjustment and are particularly useful in packaging and printing industries.
Shaft collars are composed of two components: a central bore and a second component. The first component is preferably made of resilient elastomeric material. The second component is made of a plastic material and has a relative stiffness that helps the shaft collar slide on a shaft without causing too much stress.
China Metric Set Screw Aluminum Shaft Locking Collar and shaft mounting collar     shaft collar aluminiumChina Metric Set Screw Aluminum Shaft Locking Collar and shaft mounting collar     shaft collar aluminium
editor by czh