Product Description
SMT MACHINE CZPT SPARE PARTS CZPT FX-1 FX-2 OUT SENSOR L832E3210A0 HPJ-A21
Product Description
Product name | JUKI SPARE PARTS CZPT FX-1 FX-2 OUT SENSOR L832E3210A0 HPJ-A21 |
Condition | Original new |
Usage | Juki placement machine Spare Part accessories |
Quality | 100% tested |
Package | Carton Box or wooden case |
Part number | L832E3210A0 |
Payment | Paypal, Western Union, TT, L/C and etc. |
Delivery | UPS, DHL, FedEx, express delivery, sea, and air transport. |
Application | SMT PCB Assembly Production Line, CZPT placement machine spare parts accessories |
Comprehensive product category for you to choose from | |||
1 | Placement machine feeder | 13 | LED pick and place machine |
2 | SMT placement machine | 14 | Wave soldering Machine |
3 | SMT AOI | 15 | SMT coating machine |
4 | SMT SPI | 16 | SMT cleaning machine |
5 | SMT stencil printer | 17 | SMT label mounter |
6 | SMT reflow oven | 18 | PCB cutting machine |
7 | SMT X-Ray | 19 | PCB laser machine |
8 | SMT feeder | 20 | PCB handling machine |
9 | SMT nozzle | 21 | SMT mounter |
10 | SMT digital camera | 22 | SMT accessories |
11 | SMT sensor | 23 | Placement machine accessories |
12 | SMT motor | 24 | Etc. |
Welcome to consult.
Detailed Photos
Other CZPT parts:
40046619 MOUSE HINGE
40046625 SWITCH PANEL R PRINT FIG
40046628 ROLLER XIHU (WEST LAKE) DIS.R
40046631 Z SLIDE BRACKET A
40046632 NOZZLE OUTER
40046637 MOUSE POCKET
40046642 MAGNETIC SCALE WIPER
40046643 CG2 GREASE
40046644 ZM RUBBER
40046646 FILTER
40046647 JIG NOZZLE LNC JIG
40046648 CZPT OFFSET BOSS(70)
40046649 CZPT OFFSET BOSS(80)
405710 T3.5 JIG SPACER JIG
405711 T16.5 JIG SPACER JIG
40046680 COPLANARITY UNIT ASM
4057108 LINEAR_XIHU (WEST LAKE) DIS._Y
4057109 CABLE BEAR Y
4057150 LINEAR_XIHU (WEST LAKE) DIS._X
4057173 ATC_LABEL
4057186 CABLE BEAR X
4057196 CB_SUPPORT_B_S
LNC HEAD ASM FX-3
OCC_LENS_ASSY
OCC_LIGHT_ASSY
HMS_ASSY
OCC_ASSY
SOLENOID_VALVE
OCC_LENS_BRACKET
MANIFOLD_VALVE_A_ASM
PWB_XIHU (WEST LAKE) DIS. S-A
PWB_XIHU (WEST LAKE) DIS. S-B
PWB_XIHU (WEST LAKE) DIS._PLATE_S-A
PWB_XIHU (WEST LAKE) DIS._PLATE_S-B
PWB_XIHU (WEST LAKE) DIS._J
JOINT_PULLEY_BELT
PWB_INNER_A
PWB_INNER_B
PWB_XIHU (WEST LAKE) DIS._IN-OUT
CONVEYOR_BELT_S
CONVEYOR BELT J
CONVEYOR BELT IN/OUT
CONVEYOR_BELT_IN/OUT-W
DRIVE_PULLEY
STOPPER_CHIP_B
RAIL_STAND_PLATE
4057160 XY_DRIVER_UNIT
4057164 VACUUM_PUMP_ASSY
4057179 POWER_SUPPRY_ASSY
4057183 CTRL_BOX_ASSY
4057136 XY DRV UNIT (EN) ASM
4057138 SAFETY UNIT BODY ASSY
4057139 POWER SUPPLY ASSY L(EN)
4057140 POWER SUPPLY ASSY R(EN)
4057160 COVER_RB_C
4057170 LCD_BRACKET_F
4057171 LCD_BRACKET_R
4057181 COVER_SB_R
4057182 COVER_SB_A
4057184 COVER_SB_B
4057194 COVER_FB_B
457109 GAS SPRING
457116 COVER_SB_L
457144 LOCK_SHAFT(HSM)
457145 FIXING_PLATE(HSM)
457149 DRIVER_BRACKET
457153 UP_SENSOR_STAY
457154 DRIVE_CYLINDER(FX3)_ASM
457172 TAPE_XIHU (WEST LAKE) DIS.
457173 FS_PLATE
457174 ROLLER_XIHU (WEST LAKE) DIS.
457177 ROLLER_XIHU (WEST LAKE) DIS._LL
4057109 SOLENOIDO_GIRD
4057125 HEAD_TOP_COVER_R
4057126 HEAD_TOP_COVER_R
4057129 CB_SUPPORT_SHEET_T
4057134 XM_BASE_B
4057157 HTP_POLE_A
4057192 Y_FIX_STOPPER
4057189 CZPT SW(F) ASM
4057194 F-KEYBOARD CABLE ASM
4057199 ETHER CONVERSION CABLE ASM
4057100 XY BEAR CABLE D ASM
4057102 ETHER-MAIN PCB ASM
4057104 ETHER-SLAVE PCB ASM
4057106 HEAD-MAIN PCB ASM
4057108 OCC A LIGHT PCB ASM
4057112 OCC C LIGHT PCB ASM
4057114 XY-RELAY PCB ASM
4057118 BASE-CARRY PCB ASM
4057120 OPERATION PCB FRONT ASM
4057122 POWER PCB ASM
4057124 ZT POWER PCB ASM
Packaging & Shipping
We use wooden case packaging, vacuum packaging, carton packaging and other combinations
ensure that the goods will not be damaged during transportation.
Company Profile
ZheZheJiang nling Industrial Co., Ltd is focusing on the global Placement machine industry.
Our company is a high-end brand manufacturer of automatic AOI visual inspection equipment and a global supplier of CZPT accessories, which integrates R & D, manufacturing, sales, and service. The company’s R & D team is composed of overseas and domestic senior VISION technical experts, has many years of R & D and manufacturing experience in the AOI visual inspection equipment industry, and the core technology has obtained a number of invention and application patents. At the same time, it also operates various brands of CZPT whole-line equipment leasing business, CZPT maintenance business, CZPT accessories business.
Our Advantages
1. Brand authentic guarantee
2. Customization is acceptable
3. Professional technical and sales team
4. Complete SMT brand and product support
5. Over 15 years experience, quality guarantee.
6. Full range of products, sufficient inventory, and fast delivery time
Brand Partner
FAQ
1. What products can you provide?
Placement Machine Feeder, CZPT Placement Machine, CZPT AOI, CZPT SPI, CZPT Stencil Printer, CZPT Reflow Oven, CZPT X-Ray, CZPT Feeder, CZPT Nozzle, LED Pick & Place Machine, Wave Soldering Machine, CZPT Coating Machine, CZPT Cleaning Machine, CZPT Label Mounter, PCB Cutting Machine, PCB Laser Printer Machine, PCB Handling Machine, CZPT Mounter Sales: Placement Machine, Placement Machine Accessories, CZPT Accessories.
2. Can I get a sample? what is your MOQ?
Yes, the sample is available, our MOQ is 1 piece
3. How long will it take to deliver the goods?
About 1 to 7 working days.
4. What kinds of brands of parts can you provide?
We have Fuji, Juki, Yamaha, Samsung, Panasonic, Siemens, Universal, Hitachi, etc.
5. What is the warranty of CZPT machine accessories?
We provide 6 months warranty on new accessories and 3 months on Second accessories, actual life depends on working and maintenance. If it can not work after newly received, free replacement would be sent immediately or refund
After Sales Service
24 hrs online, quick response, guaranteed warranty for you!
For more information, please visit our Official website
After-sales Service: | 24 Hrs Online |
---|---|
Condition: | New |
Speed: | Super High Speed |
Precision: | High Precision |
Certification: | RoHS, ISO, CE |
Warranty: | 6 Months |
Customization: |
Available
| Customized Request |
---|
Types of Shaft Collars
A shaft collar is a simple machine component that plays a critical role in power transmission. It is typically found in gearboxes and motors, and serves as a bearing face, mechanical stop, and locating component. Its simple design makes it easy to install and use. Its various functions make it a useful machine part for many applications.
Set screw shaft collars
Set screw shaft collars are used in many different applications and can be manufactured in a variety of materials. Typical materials include carbon steel, stainless steel, platinum, silver, nylon, polysulphone, PTFE, and PVC. Collars are easy to install and adjust. A variety of secondary services are available, including internal forming, chroming, and passivating.
Set screw shaft collars come in different styles, including standard collars, quick-release collars, split collars, and threaded collars. They can be purchased in standard and metric sizes, and are available in a variety of finishes. Standard collars are available in steel and stainless steel and have a zinc plated or black oxide finish.
Set screw shaft collars are an excellent choice for holding power transmission components in place and limiting shaft movement. They are held in place by a set screw that digs into the shaft material, providing holding power. They are available in both 303 and 316 Stainless Steel, making them a reliable and efficient choice for a variety of applications.
Clamping-style shaft collars
Clamp-style shaft collars are a versatile alternative to set-screw collars. They eliminate the problems associated with the set-screw collar, such as the possibility of shaft damage. They also lock in place by compressing against the shaft. This method distributes the force on the collar and shaft evenly, creating a stronger holding power.
Shaft collars are manufactured by many companies. You can buy them in-store or online, but it is important to buy from a reputable manufacturer. Many counterfeit collars endanger the life of your machine. Choosing a quality collar will help you avoid costly and time-consuming machine breakdowns.
Clamping-style shaft collars come in a variety of sizes and types. Some of them have a hex or D-bore. Some have circular grooves to assist with installation. They can be found in bore sizes from 1/4″ to one inch. They are often used for mounting gears, sprockets, and bearings.
Two-piece clamp collars are an excellent choice for high-load applications. They have improved clamping force and impressive holding power, and can be easily installed without major disassembly. Two-piece clamp collars can also be designed with a keyway to secure a keyed shaft. There are also special double-wide clamp collars for high axial load applications.
Another type of shaft collar is the quick clamping collar. It is an excellent choice for applications where you want to make frequent setup and adjustments. It allows for easy adjustments with minimal tools. Quick clamping collars feature a cam lever and a clamping lever. They are convenient and highly flexible, making them ideal for use in many industries.
Single split shaft collars
A single split shaft collar is designed to fit one shaft and eliminate two pieces. This makes installation and disassembly easy, reducing labor and downtime. It also uses a full seating torque of the set screws to distribute forces evenly around the shaft circumference, providing stronger holding power. It can be used on a wide range of rotating equipment.
Single split shaft collars are available from CZPT Products. They are a common, high-quality way to secure a shaft. They wrap around the shaft for a secure and tight fit. They are also a versatile option that can be easily removed. These collars can be used on both hard and soft standard round shafts. They provide superior grip compared to solid collars, provide tremendous axial force, and minimize shaft distortion.
Single split shaft collars are one of the many types of bearing shaft locking collars. They are made of EN8 steel, and come with a locking setscrew. This makes installing the collar quick and easy. The collar is available in many sizes, including small, medium, and large. If you do not find the right fit, you can also have one custom-made.
These collars are commonly used for mounting fixtures, sensors, and other assemblies. They are available in two-piece and one-piece styles, and have higher holding power than standard shaft collars. They are available in a wide range of materials, including 1215 lead-free steel, 303 stainless steel, and lightweight 2024 aluminum.
Aluminum shaft collars
The CZPT company produces Aluminum shaft collars for a variety of applications. These shaft collars feature a proprietary manufacturing process to ensure accurate face-to-bore perpendicularity. This helps to improve clamping forces and installation fit. Each collar features the CZPT name stamped on it, and the collar is finished with a black oxide process to achieve a fine glossy finish. The shaft collars are available in a variety of bore sizes and styles, and can be ordered in single or two-piece styles. Additionally, they are manufactured with a high-grade forged screw, which ensures the highest quality.
Aluminum shaft collars can be customized to fit your needs. Several accessories can be added to the shaft collar, such as steel mending plates. Those who need extra load capacity can select a keyed shaft collar. They are also available in lightweight styles. These shaft collars are easy to install and disassemble, and are made from two-piece aluminum for ease of installation.
Choosing the right shaft collar material is critical to the success of your application. You should consider steel, stainless steel, or aluminum for the best corrosion resistance. Steel is stronger and offers better holding power, while aluminum offers a lower weight and a favorable strength-to-weight ratio. When selecting shaft collars, it is important to take into consideration the corrosion resistance of each material. For example, carbon steel shaft collars will not be as corrosion resistant as aluminum shaft collars, but they are lighter and have a good hold power.
Carbon steel shaft collars
Carbon steel shaft collars are a versatile solution to holding bearings in place. They are available in a range of diameters and styles to meet your application needs. They can be used for many different applications, from aerospace and military applications to marine and automotive applications. These collars are available in a variety of materials, including carbon steel, aluminum, and stainless steel.
Carbon steel shaft collars are a cost-effective alternative to stainless steel shaft collars. CZPT manufactures lead-free carbon steel shaft collars, and they are also available with RoHS-compliant yellow zinc plating. Zinc plating is less expensive than stainless steel and is an excellent anti-corrosive option. CZPT yellow zinc collars are plated by a trivalent process rather than a non-compliant hexavalent process.
Shaft collars are available in both metric and inch bore sizes. They can be used for a variety of applications and are typically available in sizes ranging from 1/4″ to three inches. They are also available with metric screws in a range of sizes, which are useful for retrofitting equipment.
Shaft collars are available in a variety of materials, including carbon steel, 303 stainless steel, and aluminum. Some options feature threads and can be welded or bolted to shafts. For more advanced applications, aluminum threaded shaft collars can be used. They are often used for mounting sensors, fixtures, and other assemblies. They come in several styles, such as double-wide, heavy-duty, and threaded.
Hinge shaft collars
Hinge shaft collars are fastening devices that secure shafts or axles. They come in a wide range of sizes, shapes, and materials. These collars can be used in a wide range of applications, including non-rotary applications. They can be manufactured in stainless steel, 1018 steel, aluminum, and brass.
Shaft collars are simple to use but can perform a variety of functions. Their primary functions include holding components in place, locating components on a shaft, and establishing attachment between the shaft and another component. To choose the right collars for a specific application, designers should consider the design, style, materials, bore size, and geometry of the shaft. They should also consider any limitations or requirements associated with the application.
Hinge shaft collars are available in round and square bores. They are most commonly used in agricultural applications. Their size makes them easy to install, and their design makes them suitable for both large and small shafts. They are also used in situations where shafts are not easily accessible. Some types of shaft collars feature flat surfaces, which are great for mounting applications and splitting hubs.
Heavy duty shaft collars are also available. These collars have larger outer diameters, wider bores, and larger screw diameters. They are manufactured from lead-free steel with a proprietary black oxide finish.
editor by CX 2023-06-13
China supplier Customized ATV Parts Auto Aluminum Alloy Die Casting Household Appliance Cooling Fan Casing Axial Flow Fan Machine Parts shaft collar ace hardware
Product Description
We Are Precision Metal Parts Manufacturer And We Providing Custom Processing Service. Send Us Drawings, We Will Feedback You Quotation Within 24 Hours
Precision Parts Display
Click Here Get More Information
Our Advantages
Equipment
3-axis, 4-axis and full 5-axis processing equipment, CNC lathe, centering machine, turning and milling compound, wire cutting, EDM, grinding, etc
Processing
CNC machining, CNC Turning, CNC Milling, Welding, Laser Cutting, Bending, Spinning, Wire Cutting, Stamping, Electric Discharge Machining (EDM), Injection Molding
Materials
Aluminum, metal, steel, metal, plastic, metal, brass, bronze, rubber, ceramic, cast iron, glass, copper, titanium, metal, titanium, steel, carbon fiber, etc
Tolerance
+/-0.01mm, 100% QC quality inspection before delivery, can provide quality inspection form
Quality Assurance
ISO9001:2015, ISO13485:2016, SGS, RoHs, TUV
Tolerance
Surface Treatment
Aluminum parts | Stainless Steel parts | Steel parts | Brass parts |
Clear Anodized | Polishing | Zinc Plating | Nickel Plating |
Color Anodized | Passivating | Oxide black | chrome plating |
Sandblast Anodized | Sandblasting | Nickel Plating | Electrophoresis black |
Chemical Film | Laser engraving | Chrome Plating | Oxide black |
Brushing | Electrophoresis black | Carburized | Powder coated |
Polishing | Oxide black | Heat treatment |
Machining Workshop
Production Process
Quality Guarantee
Click Here Get Free Quotation
Application industry
CNC Machining Parts Can Be Used in Many Industry
Aerospace/ Marine/ Metro/ Motorbike/ Automotive industries, Instruments & Meters, Office equipments, Home appliance, Medical equipments, Telecommunication, Electrical & Electronics, Fire detection system, etc
Areospace
Cylinder Heads, Turbochargers, Crankshafts, Connecting Rods Pistons, Bearing Caps, CV Joints, Steering Knuckles, Brake Calipers,Gears,Differential Housing, Axle Shafts
Auto&Motorcycle
Cylinder Heads, Turbochargers, Crankshafts, Connecting Rods Pistons,Bearing Caps, CV Joints, Steering Knuckles, Brake Calipers,Gears, Differential Housing, Axle Shafts
Energy
Drill Pipes and Casing, Impellers Casings, Pipe Control Valves, Shafts, Wellhead Equipment, Mud Pumps, Frac Pumps, Frac Tools,Rotor Shafts and disc
Robotics
Custom robotic end-effectors, Low-volume prototype, Pilot, Enclosures, Custom tooling, Fixturing
Medical Industry
Rotary Bearing Seal Rings for CZPT Knife,CT Scanner Frames,Mounting Brackets,Card Retainers for CT Scanners,Cooling Plenums for CT Scanners,Brackets for CT Scanners,Gearbox Components,Actuators,Large Shafts
Home Appliances
Screws, hinges, handles, slides, turntables, pneumatic rods, guide rails, steel drawers
Certifications
FAQ
Q1. What kind of production service do you provide?
CNC machining, CNC Turning, CNC Milling, Welding, Laser Cutting, Bending, Spinning, Wire Cutting, Stamping, Electric Discharge Machining (EDM), Injection Molding, Simple Assembly and Various Metal Surface Treatment.
Q2. How about the lead time?
Mould : 3-5 weeks
Mass production : 3-4 weeks
Q3. How about your quality?
♦Our management and production executed strictly according to ISO9001 : 2008 quality System.
♦We will make the operation instruction once the sample is approval.
♦ We will 100% inspect the products before shipment.
♦If there is quality problem, we will supply the replacement by our shipping cost.
Q4. How long should we take for a quotation?
After receiving detail information we will quote within 24 hours
Q5. What is your quotation element?
Drawing or Sample, Material, finish and Quantity.
Q6. What is your payment term?
Mould : 50% prepaid, 50% after the mould finish, balance after sample approval.
Goods : 50% prepaid, balance T/T before shipment.
Application: | Fastener, Auto and Motorcycle Accessory, Hardware Tool, Machinery Accessory, Aerospace/ Marine/Automotive/Medical Equipments |
---|---|
Standard: | GB, EN, API650, China GB Code, JIS Code, TEMA, ASME |
Surface Treatment: | Anodizing,Plating,Sandblasting,Polishing,etc |
Production Type: | Batch Production |
Machining Method: | Forging |
Material: | Nylon, Steel, Plastic, Brass, Alloy, Copper, Aluminum, Iron |
Samples: |
US$ 0.8/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
How to Choose the Right Shaft Collar
A shaft collar is a small, inexpensive machine component that serves a variety of purposes in power transmission. It is most commonly used in gearboxes and motors. It can serve as a mechanical stop, bearing face, or locating component. Its simple design makes it easy to install. Here are some of the most common types and their functions.
Function
Shaft collars are an important part of many mechanical systems. These devices hold mechanical components on a shaft and also help mount shafts on flat surfaces. They are available in many different styles, sizes, and materials. Selecting the right shaft collar is essential in preventing damage to components. Stafford Manufacturing, a leading manufacturer of shaft collars and other related mechanical components, can help you choose the right one for your application.
There are two main types of shaft collars. The first is the Heavy Duty type. It has a larger outer diameter and wider opening. While this may seem to increase holding power, the problem with that is that it can reduce the amount of space the collar has on the shaft. On the other hand, the Thin Line type is similar, but is made with smaller outer diameters. Another type is the Threaded Bore shaft collar. These shaft collars offer exceptional axial holding power, and are designed to protect threaded shafts without causing any damage.
A shaft collar has many uses and is typically used in industrial applications. It can act as a spacer and to stop shaft movement in reciprocating applications. It can also be used to align and position parts of automation machinery.
Types
There are several different types of shaft collars. These components are critical for a variety of applications, and their design plays a large role in the performance of the resulting product. To select the most appropriate collar, designers must consider several factors, including the style, material, bore size, and geometry of the shaft. Many manufacturers provide performance data, and users can contact them for assistance.
There are many different types of shaft collars, which make it important to understand how each one works and what applications they can serve. Fortunately, shaft collars are easy to install and require little maintenance. Whether you need to secure industrial railings or position medical equipment, shaft collars are a versatile component that can be tailored to meet your needs.
One type of shaft collar is the locking collar. This type of shaft collar has a threaded end that is designed to mate with spindle bearings. They offer an increased TIR than standard shaft collars and allow for precise preload control. They also feature slots for spanner wrenches.
Sizes
Shaft collars come in a variety of sizes. You can get a small diameter shaft collar for small equipment, or a large diameter shaft collar for larger equipment. Both styles are made from solid steel, and they come in several thicknesses. You can choose between one-half inch and six-inch collars, depending on your needs.
There are no specific standards for shaft collars, but most manufacturers have similar designs. They’re either single-point faced or double-split, and can be fine or coarse threaded. They’re often used as mechanical stops, bearing faces, or as locating components. Their bore is either fine or coarse, and their outside diameter and width are determined by the shaft diameter.
Shaft collars are commonly found in mechanical and automation equipment. These ring-shaped devices hold motor components, sprockets, and bearings in place. They also allow them to be adjusted and positioned precisely. A shaft collar is often used to connect the end of a shaft to a mechanical stop.
Another type of shaft collar is called a set collar. It has a recessed area for a screw to bite into a shaft. These collars are perfect for holding sprocket hubs, bearings, and spacers. They can also be used as a rigid coupling.
Cost
When choosing a shaft collar, consider its intended application and cost. Some shaft collars are very expensive while others are quite affordable. Choose one that meets the needs of your assembly. If you’re using the shaft collar infrequently, a clamp style or a set screw style may be a better choice. Then, you can easily adjust or disassemble it with just a few tools. If you’re using it more frequently, choose a two-piece shaft collar.
The material of the shaft collar is also an important consideration. Steel and stainless steel are common choices. While both materials are strong and durable, steel tends to have better holding power. However, aluminum shaft collars are lighter and provide better strength-to-weight ratio. The type of material you choose depends on the amount of corrosion protection you need, and whether you’ll need the collar to resist extreme temperatures. If the shaft collar is going to be used in a hot environment, you may want to go with a titanium collar.
There are many different sizes and types of shaft collars. The type of collar you choose depends on the specific application and the system it’ll be used in. Consider the dimensions of your shaft, the material of the shaft, and the length of the shaft to find the right fit. If you’re not sure what size you need, ask a manufacturer for help.
Placement on shaft
In some applications, the placement of the shaft collar can be critical to the overall performance of the machine. The collar’s design must take many factors into account, including material, style, bore size, and shaft geometry. If a user is uncertain of the proper placement of their collar, they should refer to the manufacturer’s website for guidance.
While shaft collars may look simple, they’re actually essential mechanical components that are used in almost every type of machinery. Despite their ubiquitous use in every industry, they are often underappreciated due to their complexity. Many people aren’t aware of their importance or the various types of collars available. This shaft collar guide will provide detailed information to help you find the right shaft collar for your specific application.
The surface treatment of the shaft collar is another important factor that contributes to its holding power. The most common treatment is a black oxide finish. This finish enhances screw torque while preserving the frictional properties of the bore. This finish can be further optimized by applying light oil to the screw. Zinc plating is also a good option for shaft collars. This material offers better corrosion resistance, but can reduce holding power.
Clamp style
A clamp style shaft collar is a simple and effective tool for securing shafts in machine tools. Its two-piece design allows for quick and easy positioning adjustments and has greater holding power than set screw collars. In addition, its friction-based connection maintains ease of use and prevents shaft damage. This type of collar is also more corrosion resistant than set screw collars.
There are several different types of shaft collars, including single and double split collars. Single-piece clamp collars are anchored into the shaft with a single tangential screw, whereas double-piece collars are anchored to the shaft with two socket cap screws. The latter type provides more stability and axial holding power and is suitable for rotating assemblies. A single or double-piece clamp collar can also be threaded to allow for precise positioning along the shaft. Its internal threads also provide enhanced support for high axial loads and act as a positive mechanical stop.
There are different types of shaft collars, each with its own set of advantages and disadvantages. A set-screw collar may be preferred over a clamp-style shaft collar, but it’s not the only choice. A set-screw collar can severely mar the shaft and can prevent fine adjustments. However, it is a good idea to use the torque wrench when tightening a shaft collar.
Zinc plated
Zinc plated shaft collars are available in a variety of sizes. They are precision machined from cold finished steel bar stock and zinc plated for corrosion resistance. They are also very attractive. They are made in the USA. Whether you need a zinc-plated shaft collar for a simple repair or a more complicated installation, Lovejoy has the right solution for your needs.
The CZPT MSP-12-FZ two-piece shaft collar has a 12mm bore, 28mm OD, and 11mm width. Its clamp style design allows you to easily install and remove the shaft collar. It is easily adjustable and is stamped with the CZPT name.
editor by CX 2023-06-07
China Hot selling Shaft Gears and Shafts Transmission Double Shredder Machine Stainless Polisher Drum Extension Assembly Impact Crusher shaft collar coupling
Product Description
Shaft Gears and Shafts Transmission Double Shredder Machine Stainless Polisher Drum Extension Assembly Impact Crusher
Application of Gear shaft
A gear shaft is a shaft that is used to transmit power from 1 gear to another. Gear shafts are typically made of steel and are designed to withstand high loads and stresses. They are available in a variety of sizes and shapes, and can be either straight or tapered.
Gear shafts are used in a variety of applications, including:
- Machinery: Gear shafts are used in a variety of machinery, such as engines, generators, and pumps.
- Power transmission: Gear shafts are used to transmit power from 1 gear to another.
- Torque transmission: Gear shafts are used to transmit torque from 1 gear to another.
- Speed matching: Gear shafts are used to match the speeds of 2 gears.
- Misalignment compensation: Gear shafts are used to compensate for misalignment between 2 gears.
Gear shafts are an essential part of many machines and systems. They allow for the safe and efficient transmission of power between different gears.
Here are some of the advantages of using gear shafts:
- Strong and durable: Gear shafts are made from high-quality materials and are designed to withstand high loads and stresses.
- Efficient: Gear shafts are able to transmit power with minimal loss of efficiency.
- Versatile: Gear shafts can be used in a variety of applications.
- Easy to maintain and repair: Gear shafts are relatively easy to maintain and repair.
Here are some of the disadvantages of using gear shafts:
- Can be noisy: Gear shafts can be noisy, especially at high speeds.
- Can be expensive: Gear shafts can be more expensive than other types of power transmission.
- Require lubrication: Gear shafts require lubrication to keep them running smoothly.
Overall, gear shafts are a versatile and reliable way to transmit power. They are strong, durable, and efficient. They are also relatively easy to maintain and repair.
Material: | Carbon Steel |
---|---|
Load: | Drive Shaft |
Stiffness & Flexibility: | Stiffness / Rigid Axle |
Journal Diameter Dimensional Accuracy: | IT6-IT9 |
Axis Shape: | Straight Shaft |
Shaft Shape: | Real Axis |
Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
---|
Common Uses for the Shaft Collar
The shaft collar is a relatively simple machine component, but one of the most important in many power transmission applications. It is most often used in gearboxes and motors, where it serves as a locating component, bearing face, and mechanical stop. Its simple design allows for easy installation and makes it ideal for a range of applications. Listed below are some of the most common uses for the shaft collar. Learn more about this important machine component.
Single split
Two-piece shaft collars are an excellent option for applications where a single piece collar is not practical. They provide the same benefits as one-piece collars, but with more convenience when installing. The two-piece collar has a clamp style, which allows the collar to be adjusted with a hand tool. They are suitable for light-duty applications and come in a variety of diameters. In addition to shaft diameters, collars are available with different threaded bore sizes. Shaft diameters are usually measured in mm. They can be easily installed and disassembled by removing the cap screws from each side.
Single split shaft collars come with a machine screw that tightens the clamp around the shaft. This ensures a tight, secure fit and better holding power than solid collars. They are easy to install, remove, and adjust, and work on virtually all types of shafts. The machine screw helps to prevent the collar from ripping the shaft.
Shaft collars come in a variety of materials. Typical materials include stainless steel, alloyed steel, and nylon. They are also available in custom sizes. If you want a specific size, be sure to specify that when ordering. These collars are made of quality materials, and they will hold up to the most rigorous applications.
Heavy duty shaft collars are manufactured from higher-grade materials than standard collars. They have a larger outer diameter, wider flange, and a larger screw for increased holding power. These collars are typically used in short-term, rigid coupling applications, and they are available in one-piece and two-piece clamp styles. These collars are typically made from 1215 lead-free steel or 303 stainless steel. Some of them can be finished with an anodized finish.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. There are three different styles of mountable shaft collars: flange collars, flat collars, and quick-release collars. The material used for shaft collars can be 1215 lead-free steel with a black oxide finish, high-strength aluminum, and 303 stainless steel.
Solid
A solid shaft collar is a shaft coupling that is used to connect two shafts. They can be made of a variety of materials, including steel, zinc plated, and stainless steel. In addition, they come with various finishing options, including a zinc plated or black oxide finish. In addition, they can be made to fit a variety of shaft sizes and types.
Shaft collars are a simple, yet essential part of machine design. They can be found in virtually any piece of machinery. They can serve a variety of functions, including holding bearings on shafts, positioning components within motor assemblies, and acting as mechanical stops. While they can serve a variety of functions, they are most commonly used as bearing faces, mechanical stops, and locating components. They are also easy to install and tighten, making them a popular choice for a variety of different applications.
Solid shaft collars are available in two types: one-piece and two-piece. The two-piece collars are generally more rigid, offering better clamping force. However, they require more seating torque than the one-piece clamp collar. This is because there are more screws to tighten the two-piece collar than the single-piece collar.
One type of solid shaft collar is the set screw collar. Its holding power comes from the set screw, which is tightened onto the shaft. Ideally, the set screw should impinge on the shaft, and bite into it. The screw should be made of a softer material, as a harder material would reduce its holding power. However, the set screw collar can be adjusted by milling small flats into the shaft at the locations of the set screw.
A solid shaft collar is a simple machine component used in various power transmission applications. The most common places where it is used include motors, gearboxes, and bearings. Their simple design makes it easy to install and maintain. Unlike early versions, however, which were primarily made of square-headed set screws, modern shaft collars feature recessed set screws.
lamping-style
A Clamping-style shaft collar is an essential component of a gearbox or motor. Its high holding power allows it to hold components securely in place and ensure proper power transmission. These collars are also commonly used as spacers or to limit the movement of shafts during reciprocating motion.
These collars come in a variety of styles, including the double-split and semi-split varieties. They are ideal for repetitive positioning and are available in steel and stainless steel. They also feature a quick release element. And the index lever makes them easy to adjust or repair.
There are several different styles of shaft collars, including the Clamping-style shaft collar. The Clamping-style collar is one of the most commonly used in industrial settings. Its clamp is attached to the shaft by screws and has a hinge on one side. This feature eliminates the risk of the screws becoming dislodged while operating the machine.
Clamping-style shaft collars are generally made of steel or stainless steel. They can be made of aluminium, but this material has lower holding power. Stainless steel collars are a good choice for cleanroom environments because they do not outgas. They also require less maintenance. If you’re uncertain which style to choose, consult with a specialist in your field.
Clamping-style shaft collars are commonly used on industrial machinery and are an important part of gearbox maintenance. If you’re planning to install one, make sure you measure it carefully before you install it. If you don’t, you may damage the shaft or endcap. And while you’re at it, be sure to check for any kinks before you use it.
Set screw
Set screw shaft collars are the most cost-effective type of shaft collar. Available in bore sizes ranging from 3/16″ to 4″, they offer increased holding power and torque capacity. Additionally, they come with a keyway in case the shafts are keyed. Commercially produced shaft collars are non-magnetic and made of 303 stainless steel. They also come with one set screw per collar.
Shaft collars can be made of aluminum, steel, or a combination of steel. They serve multiple purposes including mechanical stops and stroke limiters, and can be adjusted for the correct fit. They are easy to install and remove, and they provide high clamping power. Custom designs are also available. They can be made of different materials to suit your specific needs.
Set screw for shaft collars are commonly used in transmission and machinery applications. Set screw shaft collars can be adjusted using a screw driver. When tightened, the set screw bites into the shaft material and holds it in place. When used properly, they can reduce the amount of torque required to hold components in place.
Shaft collars come in a variety of sizes. In general, shaft collars can range from 5/64″ to one inch in diameter. In addition, you can choose between metric and inch-sized shaft collars. When choosing a shaft collar, it is important to consider the size and bore diameter of the shaft.
editor by CX 2023-05-25
China TXT (SMRY) Shaft Mounted Reducer Pullys and Rollers Machine Parts shaft collar coupling
Solution Description
SMRY Reducer Specification
1 Twin Tapered Output Hub
A tapered bore in both sides of the reducer’s output hub snugs up against a matching taper on the outer surface of the bushing. Bushing mounting screws pass by way of the bushing flange into a mounting collar on the hub. As the screws are tightened, the bushing moves inward, gripping the driven machine’s input shaft tightly and evenly around every point on its circumference. It is easy-on, easy-off. All the Output Bushing Bore accord to ANSI
2 Precrisio. n High Qua lity Gearing
C ompu ter D e s i g n He lical .Gears, Robust Alloy Materials for High Load Ability, Scenario Carburized for long life, Ground Profile Crown tooth Profile, In
Conformance with ISO 1328-1997, 98% Efficiency for Per Stage, Smooth Quiet Operation with Several Teeth in Mesh.
3 Maximum Capability Housing Layout
Near Grain Cast Iron Construction, Excellent Vibration Dampening & Shock Resistance Characteristics, Precision Bored and Dowelled to Make certain Exact In-Line Assembly.
4 Strong Alloy Metal Shafts
Robust Alloy Steel, Hardened, Ground on Journals, Gear Seatings and Extensions, for Maximum Load and Maximum Torsional Loads. Generous Dimensions Shaft
Keys for Shock Loading .
5 Use adapter for mount the torque arm, increase the strength of the gear case, the torque arm easy-on and easy-off and trustworthiness, controls position of standard torque arm mounting within recommended limits.
six BackStops
Different Areas, anti-run back device, are available on all 15:1 and 25:1 ratio units.
seven Bearings and Oilseals
Bearings are all tapered roll bearings(Apart from SMRY-2), have long time service time. Oilseals are Double Lipped Garter Spring Type, Ensuring Effective Oil
Sealing.
8 Torque Arm Assembly
For Easy Adjustment of the Belt.
size | Nominal ratio 15:one | Nominal ratio 25:1 | weight lbs |
||||
Actual Ratio | Highest Input rpm | Maximum Ouput rpm | Actual Ratio | Optimum Enter rpm | Greatest Ouput rpm | ||
SMRY-2 | fourteen.04 | 1974 | a hundred and forty | 23.37 | 1994 | eighty five | fifty eight |
SMRY-three | fourteen.87 | 2083 | a hundred and forty | 24.seventy five | 2100 | eighty five | ninety eight |
SMRY-4 | 15.thirteen | 2118 | a hundred and forty | 24.38 | 2072 | eighty five | 139 |
SMRY-five | fifteen.4 | 1925 | one hundred twenty five | 25.fifty six | 2044 | 80 | 207 |
SMRY-six | fifteen.34 | 1916 | one hundred twenty five | twenty five.14 | 2571 | eighty | 285 |
SMRY-7 | 15.23 | 1827 | a hundred and twenty | 24.84 | 1863 | 75 | 462 |
SMRY-eight | 15.08 | 1809 | one hundred twenty | 24.sixty two | 1847 | seventy five | 633 |
SMRY-nine | 15.twelve | 1814 | a hundred and twenty | twenty five.sixty six | 1925 | seventy five | 760 |
size SMRY-2, 3,4,5,6,7,8,9 , ratio 15:1 ,25:1
Organization Profile
l The greatest producer and exporter of worm equipment reducers in Asia.
l Established in 1976, we transformed from a county owned factory to personal 1 in 1996. HangZhou SINO-DEUTSCH Electricity TRANSMISSION Tools CO.,LTD is our new identify considering that 2001.
l We are the 1st maker of reducers and gearboxes in China who was offered export license since yr 1993.
l “Fixedstar” model gearboxes and reducers are the first proprietor of CHINA Leading Manufacturer and Most Well-known Trade Mark for reducers.
First to achieve ISO9001 and CE Certification between all companies of gearboxes in China.
As a skilled company of worm gearbox and worm gear reducers in China, we primarily produce reduction gearbox,aluminum scenario worm gearboxes,arc equipment cylindrical worm gearboxes, worm equipment reducers, in line helical gearboxes, and cyclo push reducers, etc. These merchandise function rational framework, steady efficiency, and dependable high quality, and so on. They are extensively employed in electrical power, mining, metallurgy, creating substance, chemical, meals, printing, ceramic, paper-creating, tobacco, and other industries.
We have 600 staff in our manufacturing facility, which covers 70,000 square meters in HangZhou. We have been generating 2,500 units of reducers each day because 2012. We are proudly exporting 70% of our items to far more than forty nations around the world all more than the word. Our clients arrive from Italy, Germany, Usa, Canada, Spain, United kingdom, Mexico, Brazil, Argentina, Turkey, Singapore and other major industrial nations in the world. thirty% of them are OEM made for immediate producers of other merchandise.
We warmly welcome customers from other components of the planet to pay a visit to us. Seeing is believing. We are quite confident that right after going to our facility, you will have self confidence on our merchandise. We have the most recent automated equipments and experienced personnel to make certain the stable good quality and big output. We have the most innovative technical and engineering staff to help most demanding prerequisite on regular and OEM merchandise.
Hunting ahead to meeting you in HangZhou, China.
US $198 / Piece | |
1 Piece (Min. Order) |
###
Application: | Industry |
---|---|
Hardness: | Hardened |
Type: | Bevel Gear |
Size: | 2-9 |
Material: | Cast Iron |
Manipulate Way: | Robotics |
###
Customization: |
Available
|
---|
###
size | Nominal ratio 15:1 | Nominal ratio 25:1 | weight lbs |
||||
Actual Ratio | Maximum Input rpm | Maximum Ouput rpm | Actual Ratio | Maximum Input rpm | Maximum Ouput rpm | ||
SMRY-2 | 14.04 | 1974 | 140 | 23.37 | 1994 | 85 | 58 |
SMRY-3 | 14.87 | 2083 | 140 | 24.75 | 2100 | 85 | 98 |
SMRY-4 | 15.13 | 2118 | 140 | 24.38 | 2072 | 85 | 139 |
SMRY-5 | 15.4 | 1925 | 125 | 25.56 | 2044 | 80 | 207 |
SMRY-6 | 15.34 | 1916 | 125 | 25.14 | 2010 | 80 | 285 |
SMRY-7 | 15.23 | 1827 | 120 | 24.84 | 1863 | 75 | 462 |
SMRY-8 | 15.08 | 1809 | 120 | 24.62 | 1847 | 75 | 633 |
SMRY-9 | 15.12 | 1814 | 120 | 25.66 | 1925 | 75 | 760 |
US $198 / Piece | |
1 Piece (Min. Order) |
###
Application: | Industry |
---|---|
Hardness: | Hardened |
Type: | Bevel Gear |
Size: | 2-9 |
Material: | Cast Iron |
Manipulate Way: | Robotics |
###
Customization: |
Available
|
---|
###
size | Nominal ratio 15:1 | Nominal ratio 25:1 | weight lbs |
||||
Actual Ratio | Maximum Input rpm | Maximum Ouput rpm | Actual Ratio | Maximum Input rpm | Maximum Ouput rpm | ||
SMRY-2 | 14.04 | 1974 | 140 | 23.37 | 1994 | 85 | 58 |
SMRY-3 | 14.87 | 2083 | 140 | 24.75 | 2100 | 85 | 98 |
SMRY-4 | 15.13 | 2118 | 140 | 24.38 | 2072 | 85 | 139 |
SMRY-5 | 15.4 | 1925 | 125 | 25.56 | 2044 | 80 | 207 |
SMRY-6 | 15.34 | 1916 | 125 | 25.14 | 2010 | 80 | 285 |
SMRY-7 | 15.23 | 1827 | 120 | 24.84 | 1863 | 75 | 462 |
SMRY-8 | 15.08 | 1809 | 120 | 24.62 | 1847 | 75 | 633 |
SMRY-9 | 15.12 | 1814 | 120 | 25.66 | 1925 | 75 | 760 |
Common Uses for the Shaft Collar
The shaft collar is a relatively simple machine component, but one of the most important in many power transmission applications. It is most often used in gearboxes and motors, where it serves as a locating component, bearing face, and mechanical stop. Its simple design allows for easy installation and makes it ideal for a range of applications. Listed below are some of the most common uses for the shaft collar. Learn more about this important machine component.
Single split
Two-piece shaft collars are an excellent option for applications where a single piece collar is not practical. They provide the same benefits as one-piece collars, but with more convenience when installing. The two-piece collar has a clamp style, which allows the collar to be adjusted with a hand tool. They are suitable for light-duty applications and come in a variety of diameters. In addition to shaft diameters, collars are available with different threaded bore sizes. Shaft diameters are usually measured in mm. They can be easily installed and disassembled by removing the cap screws from each side.
Single split shaft collars come with a machine screw that tightens the clamp around the shaft. This ensures a tight, secure fit and better holding power than solid collars. They are easy to install, remove, and adjust, and work on virtually all types of shafts. The machine screw helps to prevent the collar from ripping the shaft.
Shaft collars come in a variety of materials. Typical materials include stainless steel, alloyed steel, and nylon. They are also available in custom sizes. If you want a specific size, be sure to specify that when ordering. These collars are made of quality materials, and they will hold up to the most rigorous applications.
Heavy duty shaft collars are manufactured from higher-grade materials than standard collars. They have a larger outer diameter, wider flange, and a larger screw for increased holding power. These collars are typically used in short-term, rigid coupling applications, and they are available in one-piece and two-piece clamp styles. These collars are typically made from 1215 lead-free steel or 303 stainless steel. Some of them can be finished with an anodized finish.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. There are three different styles of mountable shaft collars: flange collars, flat collars, and quick-release collars. The material used for shaft collars can be 1215 lead-free steel with a black oxide finish, high-strength aluminum, and 303 stainless steel.
Solid
A solid shaft collar is a shaft coupling that is used to connect two shafts. They can be made of a variety of materials, including steel, zinc plated, and stainless steel. In addition, they come with various finishing options, including a zinc plated or black oxide finish. In addition, they can be made to fit a variety of shaft sizes and types.
Shaft collars are a simple, yet essential part of machine design. They can be found in virtually any piece of machinery. They can serve a variety of functions, including holding bearings on shafts, positioning components within motor assemblies, and acting as mechanical stops. While they can serve a variety of functions, they are most commonly used as bearing faces, mechanical stops, and locating components. They are also easy to install and tighten, making them a popular choice for a variety of different applications.
Solid shaft collars are available in two types: one-piece and two-piece. The two-piece collars are generally more rigid, offering better clamping force. However, they require more seating torque than the one-piece clamp collar. This is because there are more screws to tighten the two-piece collar than the single-piece collar.
One type of solid shaft collar is the set screw collar. Its holding power comes from the set screw, which is tightened onto the shaft. Ideally, the set screw should impinge on the shaft, and bite into it. The screw should be made of a softer material, as a harder material would reduce its holding power. However, the set screw collar can be adjusted by milling small flats into the shaft at the locations of the set screw.
A solid shaft collar is a simple machine component used in various power transmission applications. The most common places where it is used include motors, gearboxes, and bearings. Their simple design makes it easy to install and maintain. Unlike early versions, however, which were primarily made of square-headed set screws, modern shaft collars feature recessed set screws.
lamping-style
A Clamping-style shaft collar is an essential component of a gearbox or motor. Its high holding power allows it to hold components securely in place and ensure proper power transmission. These collars are also commonly used as spacers or to limit the movement of shafts during reciprocating motion.
These collars come in a variety of styles, including the double-split and semi-split varieties. They are ideal for repetitive positioning and are available in steel and stainless steel. They also feature a quick release element. And the index lever makes them easy to adjust or repair.
There are several different styles of shaft collars, including the Clamping-style shaft collar. The Clamping-style collar is one of the most commonly used in industrial settings. Its clamp is attached to the shaft by screws and has a hinge on one side. This feature eliminates the risk of the screws becoming dislodged while operating the machine.
Clamping-style shaft collars are generally made of steel or stainless steel. They can be made of aluminium, but this material has lower holding power. Stainless steel collars are a good choice for cleanroom environments because they do not outgas. They also require less maintenance. If you’re uncertain which style to choose, consult with a specialist in your field.
Clamping-style shaft collars are commonly used on industrial machinery and are an important part of gearbox maintenance. If you’re planning to install one, make sure you measure it carefully before you install it. If you don’t, you may damage the shaft or endcap. And while you’re at it, be sure to check for any kinks before you use it.
Set screw
Set screw shaft collars are the most cost-effective type of shaft collar. Available in bore sizes ranging from 3/16″ to 4″, they offer increased holding power and torque capacity. Additionally, they come with a keyway in case the shafts are keyed. Commercially produced shaft collars are non-magnetic and made of 303 stainless steel. They also come with one set screw per collar.
Shaft collars can be made of aluminum, steel, or a combination of steel. They serve multiple purposes including mechanical stops and stroke limiters, and can be adjusted for the correct fit. They are easy to install and remove, and they provide high clamping power. Custom designs are also available. They can be made of different materials to suit your specific needs.
Set screw for shaft collars are commonly used in transmission and machinery applications. Set screw shaft collars can be adjusted using a screw driver. When tightened, the set screw bites into the shaft material and holds it in place. When used properly, they can reduce the amount of torque required to hold components in place.
Shaft collars come in a variety of sizes. In general, shaft collars can range from 5/64″ to one inch in diameter. In addition, you can choose between metric and inch-sized shaft collars. When choosing a shaft collar, it is important to consider the size and bore diameter of the shaft.
editor by czh 2023-01-16
China Made in China CNC Turning Mining Machine Cone Crusher Spare Parts Bronze Steel Eccentric Bushing bearing shaft collar
Product Description
Solution Description
|
Business Profile
HangZhou Xihu (West Lake) Dis. Equipment Manufacture Co., Ltd., found in HangZhou, “China’s historical copper cash”, is a “countrywide substantial-tech enterprise”. At the beginning of its establishment, the business adhering to the “to provide customers with high high quality merchandise, to offer timely service” idea, adhere to the “every little thing for the buyer, make client exceptional provider” for the mission.
Certifications
Q: In which is your organization found ?
A: HangZhou ZheJiang .
Q: How could l get a sample?
A: Prior to we gained the first get, please pay for the sample value and specific payment. we will return the sample cost back
to you in your first order.
Q: Sample time?
A: Present items: within twenty-sixty times.
Q: No matter whether you could make our model on your products?
A: Indeed. We can print your Symbol on both the products and the packages if you can fulfill our MOQ.
Q: How to assure the top quality of your merchandise?
A: 1) stict detection in the course of production. 2) Strict entirely inspecion on items just before cargo and intact solution
packaging ensured.
Q: lf my drawings are safe?
A: Indeed ,we can sign NDA.
US $10-150 / Piece | |
5 Pieces (Min. Order) |
###
After-sales Service: | have |
---|---|
Warranty: | 1 year |
Type: | OEM/ODM/Customized |
Application: | OEM/ODM/Customized |
Certification: | ISO9001: 2000 |
Condition: | New |
###
Customization: |
Available
|
---|
###
###
###
###
|